NET940.INF Driver File Contents (LINKSYSEtherPCILANCardII.zip)

; LNEPCI2.INF                                          Written By : Alex Lin
;                                                                 1998.02.09
; Linksys LNEPCI II PCI Ethernet Adapters
;
; Inf for Win9x and NT5

[version]
Signature   = "$Chicago$"
Class       = Net
ClassGUID   = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider    = %Msft%
LayoutFile  = layout.inf

[Manufacturer]
%Linksys% = Linksys

; All enumerated adapters must be excluded from select
[ControlFlags]
ExcludeFromSelect = PCI\VEN_1050&DEV_0940

[Linksys]
; DisplayName           Section       DeviceID
; -----------           -------       --------
%Lnepci2.DeviceDesc%    = Lnepci2.ndi,    PCI\VEN_1050&DEV_0940

;----------------------------------------------------------------------------
; NT main sections
;
; These sections are in the form of <base section name>.NT
; They will only be processed if we are installing on NT
; Once this section is found by the class installer, the
; <base section name> section (w/o .NT) will not be processed.
; This allows us to keep Win9x specific install sections as
; <base section name>
;

; Linksys Lnepci II PCI Ethernet Adapter
;
[Lnepci2.ndi.NT]
AddReg          = Lnepci2.nt.reg,Lnepci2.reg
BusType         = 5   ;PCI
Characteristics = 0x24 ; NCF_PHYSICAL

;-----------------------------------------------------------------------------
; Win9x main sections
;

; Linksys Lnepci II PCI Ethernet Adapter (10/100)
;
[Lnepci2.ndi]
AddReg    = Lnepci2.id.reg, Lnepci2Flags.reg, Lnepci2.win.reg
DeviceID  = "PCI\VEN_1050&DEV_0940"
LogConfig = DefaultConfig

;----------------------------------------------------------------------------
; Win9x id registry sections
; These are not needed by NT
;
[Lnepci2.id.reg]
HKR, Ndi, DeviceID, 0, "PCI\VEN_1050&DEV_0940"

;----------------------------------------------------------------------------
; Win9x flags section
;
; Flags are not needed by NT

[Lnepci2Flags.reg]
;HKR, Ndi\params\MapRegisters,   flag, 1, 20,00,00,00
;HKR, Ndi\params\Eid,            flag, 1, 20,00,00,00
;HKR, Ndi\params\NumRfd,         flag, 1, 20,00,00,00
;HKR, Ndi\params\NumTcb,         flag, 1, 20,00,00,00
;HKR, Ndi\params\NumCoalesce,    flag, 1, 20,00,00,00
;HKR, Ndi\params\ForceDpx,       flag, 1, 20,00,00,00
;HKR, Ndi\params\Speed,          flag, 1, 30,00,00,00

;----------------------------------------------------------------------------
; Lnepci2 common
;
[Lnepci2.reg]
HKR, Ndi\params\ForceDpx,       ParamDesc,  0, "Duplex Mode"
HKR, Ndi\params\ForceDpx,       default,    0, "0"
HKR, Ndi\params\ForceDpx,       type,       0, "enum"
HKR, Ndi\params\ForceDpx\enum,  "0",        0, "Auto Duplex Detect"
HKR, Ndi\params\ForceDpx\enum,  "1",        0, "Half-Duplex"
HKR, Ndi\params\ForceDpx\enum,  "2",        0, "Full-Duplex"

;HKR, Ndi\params\MapRegisters,   ParamDesc,  0, "Map Registers"
;HKR, Ndi\params\MapRegisters,   default,    0, "64"
;HKR, Ndi\params\MapRegisters,   min,        0, "0"
;HKR, Ndi\params\MapRegisters,   max,        0, "64"
;HKR, Ndi\params\MapRegisters,   step,       0, "1"
;HKR, Ndi\params\MapRegisters,   base,       0, "10"
;HKR, Ndi\params\MapRegisters,   type,       0, "int"

;HKR, Ndi\params\Eid,            ParamDesc,  0, "Ethernet ID"
;HKR, Ndi\params\Eid,            default,    0, "0"
;HKR, Ndi\params\Eid,            base,       0, "10"
;HKR, Ndi\params\Eid,            type,       0, "dword"

;HKR, Ndi\params\NumRfd,         ParamDesc,  0, "Receive Frame Descriptors"
;HKR, Ndi\params\NumRfd,         default,    0, "16"
;HKR, Ndi\params\NumRfd,         min,        0, "1"
;HKR, Ndi\params\NumRfd,         max,        0, "00001024"
;HKR, Ndi\params\NumRfd,         step,       0, "1"
;HKR, Ndi\params\NumRfd,         Base,       0, "10"
;HKR, Ndi\params\NumRfd,         type,       0, "int"

;HKR, Ndi\params\NumTcb,         ParamDesc,  0, "Transmit Control Blocks"
;HKR, Ndi\params\NumTcb,         default,    0, "16"
;HKR, Ndi\params\NumTcb,         min,        0, "1"
;HKR, Ndi\params\NumTcb,         max,        0, "00000064"
;HKR, Ndi\params\NumTcb,         step,       0, "1"
;HKR, Ndi\params\NumTcb,         Base,       0, "10"
;HKR, Ndi\params\NumTcb,         type,       0, "int"

;HKR, Ndi\params\NumCoalesce,    ParamDesc,  0, "Coalesce Buffers"
;HKR, Ndi\params\NumCoalesce,    default,    0, "8"
;HKR, Ndi\params\NumCoalesce,    min,        0, "1"
;HKR, Ndi\params\NumCoalesce,    max,        0, "00000032"
;HKR, Ndi\params\NumCoalesce,    step,       0, "1"
;HKR, Ndi\params\NumCoalesce,    Base,       0, "10"
;HKR, Ndi\params\NumCoalesce,    type,       0, "int"


;----------------------------------------------------------------------------
; Lnepci2 NT specific
;

[Lnepci2.nt.reg]
HKR, Ndi,                       Service,    0, "Lnepci2"
HKR, Ndi\Install,               ,           0, "Lnepci2.Install"
HKR, ,                          BusType,    0, "5"
HKR, ,                          MsPciScan,  0, "1"
HKR, Ndi\Interfaces,            DefUpper,   0, "ndis5"
HKR, Ndi\Interfaces,            DefLower,   0, "ethernet"
HKR, Ndi\Interfaces,            UpperRange, 0, "ndis5"
HKR, Ndi\Interfaces,            LowerRange, 0, "ethernet"

[Lnepci2.Install.NT]
CopyFiles = Lnepci2.CopyFiles

; The services section name is based on the install
; section name found. "Lnepci2.Install" is listed but
; since "Lnepci2.Install.NT" will be found on NT, the
; Services section must be based on the new name
; "Lnepci2.Install.NT".
;

[Lnepci2.Install.NT.Services]
AddService = Lnepci2, 2, Lnepci2.Service, common.EventLog

[Lnepci2.CopyFiles]
Lnepci2.sys,,,2 ; Do not allow the user to skip this file!

[Lnepci2.Service]
DisplayName     = %Lnepci2.Service.DispName%
ServiceType     = 1 ;%SERVICE_KERNEL_DRIVER%
StartType       = 2 ;%SERVICE_AUTO_START%
ErrorControl    = 1 ;%SERVICE_ERROR_NORMAL%
ServiceBinary   = %12%\Lnepci2.sys
LoadOrderGroup  = NDIS

[common.EventLog]
AddReg = common.AddEventLog.reg

[common.AddEventLog.reg]
HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
HKR, , TypesSupported,   0x00010001, 7


;----------------------------------------------------------------------------
; Lnepci2 Win9x specific
;
[Lnepci2.win.reg]
HKR, Ndi\Interfaces,            DefUpper,   0, "ndis3"
HKR, Ndi\Interfaces,            DefLower,   0, "ethernet"
HKR, Ndi\Interfaces,            UpperRange, 0, "ndis3"
HKR, Ndi\Interfaces,            LowerRange, 0, "ethernet"

HKR, ,              DevLoader,          0, "*ndis"
HKR, ,              DeviceVxDs,         0, "lnepci2.sys"
HKR, ,              EnumPropPages,      0, "netdi.dll,EnumPropPages"

HKR, NDIS,          LogDriverName,      0, "Lnepci2"
HKR, NDIS,          MajorNdisVersion,   1, 03
HKR, NDIS,          MinorNdisVersion,   1, 0A

HKR, Ndi\Install,   ndis3,              0, "Lnepci2.ndis3.install"


[Lnepci2.ndis3.install]
CopyFiles = Lnepci2.ndis3.CopyFiles

[Lnepci2.ndis3.CopyFiles]
Lnepci2.sys,,,2  ; Do not allow the user to skip this file!



;----------------------------------------------------------------------------
; DestinationDirs
;
[DestinationDirs]
Lnepci2.CopyFiles  = 12
Lnepci2.ndis3.CopyFiles = 11


[Strings]
Msft      = "Microsoft"
Linksys   = "Linksys"

Lnepci2.DeviceDesc   = "Linksys Lnepci II Ethernet PCI Adapter"

Lnepci2.Service.DispName  = "Linksys Lnepci II Ethernet Adapter NT Driver"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.03