; LNEPCI2.INF Written By : Alex Lin ; 1998.02.09 ; Linksys LNEPCI II PCI Ethernet Adapters ; ; Inf for Win9x and NT5 [version] Signature = "$Chicago$" Class = Net ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318} Provider = %Msft% LayoutFile = layout.inf [Manufacturer] %Linksys% = Linksys ; All enumerated adapters must be excluded from select [ControlFlags] ExcludeFromSelect = PCI\VEN_1050&DEV_0940 [Linksys] ; DisplayName Section DeviceID ; ----------- ------- -------- %Lnepci2.DeviceDesc% = Lnepci2.ndi, PCI\VEN_1050&DEV_0940 ;---------------------------------------------------------------------------- ; NT main sections ; ; These sections are in the form of <base section name>.NT ; They will only be processed if we are installing on NT ; Once this section is found by the class installer, the ; <base section name> section (w/o .NT) will not be processed. ; This allows us to keep Win9x specific install sections as ; <base section name> ; ; Linksys Lnepci II PCI Ethernet Adapter ; [Lnepci2.ndi.NT] AddReg = Lnepci2.nt.reg,Lnepci2.reg BusType = 5 ;PCI Characteristics = 0x24 ; NCF_PHYSICAL ;----------------------------------------------------------------------------- ; Win9x main sections ; ; Linksys Lnepci II PCI Ethernet Adapter (10/100) ; [Lnepci2.ndi] AddReg = Lnepci2.id.reg, Lnepci2Flags.reg, Lnepci2.win.reg DeviceID = "PCI\VEN_1050&DEV_0940" LogConfig = DefaultConfig ;---------------------------------------------------------------------------- ; Win9x id registry sections ; These are not needed by NT ; [Lnepci2.id.reg] HKR, Ndi, DeviceID, 0, "PCI\VEN_1050&DEV_0940" ;---------------------------------------------------------------------------- ; Win9x flags section ; ; Flags are not needed by NT [Lnepci2Flags.reg] ;HKR, Ndi\params\MapRegisters, flag, 1, 20,00,00,00 ;HKR, Ndi\params\Eid, flag, 1, 20,00,00,00 ;HKR, Ndi\params\NumRfd, flag, 1, 20,00,00,00 ;HKR, Ndi\params\NumTcb, flag, 1, 20,00,00,00 ;HKR, Ndi\params\NumCoalesce, flag, 1, 20,00,00,00 ;HKR, Ndi\params\ForceDpx, flag, 1, 20,00,00,00 ;HKR, Ndi\params\Speed, flag, 1, 30,00,00,00 ;---------------------------------------------------------------------------- ; Lnepci2 common ; [Lnepci2.reg] HKR, Ndi\params\ForceDpx, ParamDesc, 0, "Duplex Mode" HKR, Ndi\params\ForceDpx, default, 0, "0" HKR, Ndi\params\ForceDpx, type, 0, "enum" HKR, Ndi\params\ForceDpx\enum, "0", 0, "Auto Duplex Detect" HKR, Ndi\params\ForceDpx\enum, "1", 0, "Half-Duplex" HKR, Ndi\params\ForceDpx\enum, "2", 0, "Full-Duplex" ;HKR, Ndi\params\MapRegisters, ParamDesc, 0, "Map Registers" ;HKR, Ndi\params\MapRegisters, default, 0, "64" ;HKR, Ndi\params\MapRegisters, min, 0, "0" ;HKR, Ndi\params\MapRegisters, max, 0, "64" ;HKR, Ndi\params\MapRegisters, step, 0, "1" ;HKR, Ndi\params\MapRegisters, base, 0, "10" ;HKR, Ndi\params\MapRegisters, type, 0, "int" ;HKR, Ndi\params\Eid, ParamDesc, 0, "Ethernet ID" ;HKR, Ndi\params\Eid, default, 0, "0" ;HKR, Ndi\params\Eid, base, 0, "10" ;HKR, Ndi\params\Eid, type, 0, "dword" ;HKR, Ndi\params\NumRfd, ParamDesc, 0, "Receive Frame Descriptors" ;HKR, Ndi\params\NumRfd, default, 0, "16" ;HKR, Ndi\params\NumRfd, min, 0, "1" ;HKR, Ndi\params\NumRfd, max, 0, "00001024" ;HKR, Ndi\params\NumRfd, step, 0, "1" ;HKR, Ndi\params\NumRfd, Base, 0, "10" ;HKR, Ndi\params\NumRfd, type, 0, "int" ;HKR, Ndi\params\NumTcb, ParamDesc, 0, "Transmit Control Blocks" ;HKR, Ndi\params\NumTcb, default, 0, "16" ;HKR, Ndi\params\NumTcb, min, 0, "1" ;HKR, Ndi\params\NumTcb, max, 0, "00000064" ;HKR, Ndi\params\NumTcb, step, 0, "1" ;HKR, Ndi\params\NumTcb, Base, 0, "10" ;HKR, Ndi\params\NumTcb, type, 0, "int" ;HKR, Ndi\params\NumCoalesce, ParamDesc, 0, "Coalesce Buffers" ;HKR, Ndi\params\NumCoalesce, default, 0, "8" ;HKR, Ndi\params\NumCoalesce, min, 0, "1" ;HKR, Ndi\params\NumCoalesce, max, 0, "00000032" ;HKR, Ndi\params\NumCoalesce, step, 0, "1" ;HKR, Ndi\params\NumCoalesce, Base, 0, "10" ;HKR, Ndi\params\NumCoalesce, type, 0, "int" ;---------------------------------------------------------------------------- ; Lnepci2 NT specific ; [Lnepci2.nt.reg] HKR, Ndi, Service, 0, "Lnepci2" HKR, Ndi\Install, , 0, "Lnepci2.Install" HKR, , BusType, 0, "5" HKR, , MsPciScan, 0, "1" HKR, Ndi\Interfaces, DefUpper, 0, "ndis5" HKR, Ndi\Interfaces, DefLower, 0, "ethernet" HKR, Ndi\Interfaces, UpperRange, 0, "ndis5" HKR, Ndi\Interfaces, LowerRange, 0, "ethernet" [Lnepci2.Install.NT] CopyFiles = Lnepci2.CopyFiles ; The services section name is based on the install ; section name found. "Lnepci2.Install" is listed but ; since "Lnepci2.Install.NT" will be found on NT, the ; Services section must be based on the new name ; "Lnepci2.Install.NT". ; [Lnepci2.Install.NT.Services] AddService = Lnepci2, 2, Lnepci2.Service, common.EventLog [Lnepci2.CopyFiles] Lnepci2.sys,,,2 ; Do not allow the user to skip this file! [Lnepci2.Service] DisplayName = %Lnepci2.Service.DispName% ServiceType = 1 ;%SERVICE_KERNEL_DRIVER% StartType = 2 ;%SERVICE_AUTO_START% ErrorControl = 1 ;%SERVICE_ERROR_NORMAL% ServiceBinary = %12%\Lnepci2.sys LoadOrderGroup = NDIS [common.EventLog] AddReg = common.AddEventLog.reg [common.AddEventLog.reg] HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll" HKR, , TypesSupported, 0x00010001, 7 ;---------------------------------------------------------------------------- ; Lnepci2 Win9x specific ; [Lnepci2.win.reg] HKR, Ndi\Interfaces, DefUpper, 0, "ndis3" HKR, Ndi\Interfaces, DefLower, 0, "ethernet" HKR, Ndi\Interfaces, UpperRange, 0, "ndis3" HKR, Ndi\Interfaces, LowerRange, 0, "ethernet" HKR, , DevLoader, 0, "*ndis" HKR, , DeviceVxDs, 0, "lnepci2.sys" HKR, , EnumPropPages, 0, "netdi.dll,EnumPropPages" HKR, NDIS, LogDriverName, 0, "Lnepci2" HKR, NDIS, MajorNdisVersion, 1, 03 HKR, NDIS, MinorNdisVersion, 1, 0A HKR, Ndi\Install, ndis3, 0, "Lnepci2.ndis3.install" [Lnepci2.ndis3.install] CopyFiles = Lnepci2.ndis3.CopyFiles [Lnepci2.ndis3.CopyFiles] Lnepci2.sys,,,2 ; Do not allow the user to skip this file! ;---------------------------------------------------------------------------- ; DestinationDirs ; [DestinationDirs] Lnepci2.CopyFiles = 12 Lnepci2.ndis3.CopyFiles = 11 [Strings] Msft = "Microsoft" Linksys = "Linksys" Lnepci2.DeviceDesc = "Linksys Lnepci II Ethernet PCI Adapter" Lnepci2.Service.DispName = "Linksys Lnepci II Ethernet Adapter NT Driver"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.