SetIP.ini Driver File Contents (z28938Lf.exe)

[SetIP]
IDS_ABOUTBOX=SetIP Information
IDP_SOCKETS_INIT_FAILED=Windows socket failed to create.
IDS_REFRESH=Refresh
IDS_SETUP=Setup
IDS_MAN_SET=Manual Setting
IDS_ABOUT=About
IDS_PRINTER_NAME=Printer Name
IDS_MAC_ADDR=Mac Address
IDS_IP_ADDR=IP Address
IDS_SUBNET_ADDR=Subnet Mask
IDS_GATEWAY_ADDR=Default Gateway
IDS_SEARCH_MSG=Searching printer...
IDS_SOCKET_ERR=Cannot create socket.
IDS_SYS_ERR_TITLE=System Error
IDS_RETRY_MSG=Unknown Error. Try again!!
IDS_SEND_ERR=Cannot send data to network.
IDS_MAC_ERR=Make sure that Mac address is correct.
IDS_MAC_ERR_TITLE=Mac address Error
IDS_IP_CONG_TITLE=TCP/IP Configuration
IDS_APPLY=Apply
IDS_CANCEL=Cancel
IDS_IP_ERR=Make sure that IP address is correct.
IDS_IP_ERR_TITLE=IP Error
IDS_SUBNET_ERR=Make sure that Subnet mask is correct.
IDS_SUBNET_ERR_TITLE=Subnet Mask Error
IDS_GATEWAY_ERR=Make sure that Default gateway address is correct.
IDS_GATEWAY_ERR_TITLE=Gateway Error
IDS_CONFIRM_MSG=Do you really want to update the printer's network  configuration with these parameters?
IDS_CONFIRM_IP=IP
IDS_CONFIRM_SUBNET=Subnet
IDS_CONFIRM_GATEWAY=Gateway
IDS_CONFIRM_TITLE=Confirm
IDS_SUCCESS_TITLE=Success
IDS_SUCCESS_MSG=Updated TCP/IP Configuration successfully.
IDS_SET_ERR=Cannot receive any Response. Confirm printer MAC address. If printer prints test page, the printer did update illegal TCP/IP parameter. Retry after restarting printer.
IDS_NO_RESP_TITLE=No Response
IDS_TCPIP_TITLE=[TCP/IP Configuration]
IDS_RESET=Reset
IDS_ABOUT_STR1=SET IP Version 1.05EN
IDS_ABOUT_STR2=Copyright(C) 2008
IDS_ABOUT_STR3=Ricoh Company Ltd.
IDS_HELP=Help
IDS_EXIT=Exit
IDS_OK=OK
IDS_Language=English
IDS_UseAboutBox=Yes
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.67