[default] ModuleName=Scan Manager Pro title=Scan Manager Pro [error101] title=Scan Manager Pro text=Hardware not found [error102] title=System configuration problem text=USB not accessible [error103] title=Scan Manager Pro text=Multiple accesses to Scan Manager are not allowed. Please close one, then reacquire the scanner. [error104] title=Scan Manager Pro text=The scan size was too large. Please change the size. [error105] title=Scan Manager Pro text=The scan size was too large. Please change the size. [scannername] 9300=OneTouch 9320 9200=OneTouch 9220 9000=OneTouch 9020 DefaultID=9300 [option] RunMatrix=0 // 1: Apply 3x3 Matrix; 0: Not Apply DefaultGamma=1.0 PosDefaultGamma=1.0 GrayDefaultGamma=1.0 sValue=1.2 // sValue: diagonal line value of 3x3 Matrix; Other elements of 3x3 Matrix is -(sValue-1)/2 DumpLut=0 // 1: Dump upper LUT to file for debug; 0: No Dump PositiveApplyColorMatch=0 // (for ScanManager Pro) NegativeApplyColorMatch=1 // (for ScanManager Pro) RefColorMatch=1 // 1: Enable Color Matching; 0: Disable AdfColorMatch=1 // 1: Enable Color Matching; 0: Disable PostiveCutLine=0 // 1: Cut Pos uppper boundry; 0: Not Cut (for ScanManager Pro) PostiveBoundValue=13 // Cut Pos uppper boundry when Std<PostiveBoundValue(for ScanManager Pro) CMatchID=115 // Set A&W Color model ID NegDoColorConvertionR=0 // 1: Rotate Neg Pattern right 90 degree; 0: Disable(for ScanManager Pro) UseAgfaCm=1 // 1: Use Pmx Color Matching; 0: Use A&W Color Matching SaveAGCInfoBmp=1 // 1: Save Image before send to Color Table; 0: Not Save(for ScanManager Pro) NegDoColorConvertion=1 // 1: Call A&W NegColorConvertion function; 0: Not call (for ScanManager Pro) UseAGCCurve=1 // 1: Set A&W analysised R,G,B curves to driver; 0: Not set (for ScanManager Pro) UseAfCmRef=0 // 1: Use Pmx FB color matching when 48bits; 0: Not use (for ScanManager Pro) UseAfCmPos=0 // 1: Use Pmx Pos color matching when 48bits; 0: Not use (for ScanManager Pro) UseAfCmNeg=0 // 1: Use Pmx Neg color matching when 48bits; 0: Not use (for ScanManager Pro) CmFileNameRef=R3DTCAF.bmp CmFileNameAdf=R3DTCRF.bmpDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.