D-Link DFE-530TX PCI Fast Ethernet Adapter Installation for NetWare Server v4.11, v4.2 Contents -------- - Compatibility List - Getting Started - First time installation from the install menu - The other time installation from the install menu Compatibility List ------------------ For NW4.11, you needs to install Novell's support pack v5.0 and later for upgrading NBI.NLM, MSM.NLM and ETHERTSM.NLM for CHSM (Spec v1.11). We recommends you use the latest Novell Service Packs. The latest server NLMs and support files for NetWare can be found on Novell's automated services under the heading of "Minimum Patch List". Getting Started --------------- First time installation from the install menu --------------------------------------------- 1. Start the NetWare Server. > CD \NWSERVER > SERVER 2. Execute "LOAD INSTALL" after booting up. Type, : LOAD INSTALL 3. Select "Driver Options", -> "Configure network drivers", and -> "Select a driver". 4. Press <Insert> key to install an unlisted driver. 5. Please insert released driver CD into CD-ROM drive. 6. Press <F3> to specify a different <PATH>. <PATH> is a directory which includes both DLKFET.LAN and DLKFET.LDI Ex. <CD drive>:\NETWARE\32BITLAN 7. Select "DLKFET.LAN ....". Note: Please don't copy the NLM files to system, if CD-ROM NLM files version older than system. 8. Specify "SLOT", "Media and Line Speed" and "Node Address" if necessary. 9. Select "Save parameters and load driver" after configuring adapter setting. 10. NetWare server will load/bind driver automatically. The other time installation from the install menu ------------------------------------------------- 1. Start the NetWare Server. > CD \NWSERVER > SERVER 2. Execute "LOAD INSTALL" after booting up. Type, : LOAD INSTALL 3. Select "Driver Options", -> "Configure network drivers", and -> "Select a driver". 4. Select "DLKFET.LAN ...." in Select a driver windows. 5. Specify "SLOT", "Node Address", "Media and Line Speed", and "Flow control ability" if necessary. 6. Select "Save parameters and load driver" after configuring adpter setting. 7. NetWare server will load/bind driver automatically. Parameters supported by the DLKFET.LAN driver The following keywords are for driver v5.10 or later. ---------------------------------------------------------------- CONNECTIONTYPE This keyword is used to specify media type. CONNECTIONTYPE=AutoSense CONNECTIONTYPE=10BASET CONNECTIONTYPE=10BASETFD CONNECTIONTYPE=100BASETX CONNECTIONTYPE=100BASETXFD FLOW_CONTROL This keyword is used to specify flow control ability.(Not supported in force mode) FLOW_CONTROL=DISABLE FLOW_CONTROL=ENABLE FLOW_CONTROL=HARDWARE_DEFAULT (default) The following keywords are for driver v5.10 previously(v5.10 not included). ------------------------------------------------------------------------ SLOT 1 - Force the driver to search for the specified board AUTOSENSE - This keyword configures the adapter to conduct NWay Auto-negotiation to determine the network speed and the duplex mode of the network connection. 10BASET - Force driver to 10Mbps half duplex mode. 10BASETFD - Force driver to 10Mbps full duplex mode. 100BASETX - Force driver to 100Mbps half duplex mode. 100BASETXFD - Force driver to 100Mbps full duplex mode.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.