1. RTL8019AS.ZIP Driver
2. README.TXT File Contents

README.TXT Driver File Contents (RTL8019AS.ZIP)

                   ***************************************
                   *                                     *
                   *         EZCFG.EXE  V3.00            *
                   *                                     *
                   ***************************************


PnP Ethernet Card Configuration and Diagnostics file
----------------------------------------------------

To configure your PnP Ethernet Card, execute the configuration file,EZCFG.
A screen menu will guide you to configure the PnP Ethernet Card to fit your
computer system's environment.

The following is the configuration parameters.

   Operating Mode :    NE2000 , PnP

   I/O Address :       220h,240h,260h,280h,2A0h,2C0h,2E0h,300h,320h,
                       340h,360h,380h,3A0h,3C0h,3E0h

   IRQ Line    :       9(2),3,4,5,10,11,12,15

   BOOT ROM Address :  C000H,32K C800H,32K D000H,32K D800H,32K
                       C000H,16K C400H,16K C800H,16K CC00H,16K D000H,16K
                       D400H,16K D800H,16K DC00H,16K

   UTP Duplex Type :   Half-Duplex , Full-Duplex

   Data Width  :       8 bits or 16 bits; auto sensing by hardware



   Note: Be sure to set your PnP Ethernet Adapter to "NE2000" operation
         mode before using this adapter with the RPL BOOT ROM.



Before you install the drivers and connect the PnP Ethernet Card to the network,
make sure to run the diagnostics to assure the proper function of the PnP
Ethernet Card. The diagnostics includes two groups of test :

   1. Card initialization and loopback test

      This test performs the function of verifying the components, connectors,
      and circuitry.

   2. Network test

      This test performs the data transmission and reception of the adapter.
      A screen menu provides you with the instructions to conduct this test.

------------------------------------[END]---------------------------------------


How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.