1. r19607en.exe Driver
2. Readme.txt File Contents

Readme.txt Driver File Contents (r19607en.exe)

=======================================================================

RP-GL/2 HDI Printer Driver Ver1.13 for AutoCAD(LT) 2004/2005/2006 

         '07. 02. 22   RICOH Co., Ltd.

=======================================================================
                               (C) Copyright 2007 RICOH Co., Ltd.
=======================================================================


<Introduction>
This product is the RP-GL/2 HDI Printer Driver for printing from AutoCAD(LT) 2004/2005/2006. 
2004/2005/2006.Please read and understand this document before using the RP-GL/2 HDI Printer Driver.

------------------------------------------------------------------------
SOFTWARE LICENSE AGREEMENT

YOU, THE END USER, SHALL USE THIS SOFTWARE("THE SOFTWARE") ACCORDING TO THE 
TERMS OF THIS AGREEMENT.
BY LOADING THE SOFTWARE INTO ANY COMPUTER, YOU ARE AGREEING TO BE BOUND BY THESE TERMS. IF YOU DO NOT ACCEPT THE TERMS OF THIS AGREEMENT, YOU MAY NOT LOAD THIS SOFTWARE INTO ANY COMPUTER.


Grant of License
The Software is licensed for use by you for the equipment packaged with the 
Software or designated by its supplier ("the equipment"). You are permitted to 
use the Software on any computer which permits electronic access to the 
equipment. You are not permitted to rent or lease the Software or to transfer 
your rights under this license to a third party.


Acceptance
You shall be deemed to have accepted the terms of this Agreement by loading the Software into any computer.


Duration
This license is effective until terminated. The license will terminate where you fail to comply with the terms of this Agreement. Upon termination, you agree to destroy all copies of the Software and its documentation. 


Ownership of Software
You own, if any, only the magnetic media on which the Software has been 
delivered. It is an express condition of this Agreement that the title and ownership of the Software shall be retained by its owners.


Copying
The Software and its documentation are the subject of Copyright.
You may not make any copies nor cause others to make copies of the Software 
except such copies as are necessary for licensed use and one copy for operational security. Any such copies are subject to the conditions of this Agreement.
You may not modify, adapt, merge, translate, reverse engineer, decompile, disassemble or create derivative works based on the whole or any part of the Software or its associated documentation.
You may be held legally responsible for any copyright infringement, unauthorized transfer, reproduction or use of the Software or its documentation.


Limitation of Warranty
The media, if any, not the Software contained therein, is warranted to the 
original purchaser against defects in material and workmanship for a period of 
one year from the date of original purchase. Defective media will be replaced 
when it is returned to your supplier, postage prepaid, along with a copy of the purchase receipt.

THESE RIGHTS ARE YOUR SOLE AND EXCLUSIVE REMEDY, WHETHER IN TORT, CONTRACT, OR 
OTHERWISE. IN NO EVENT SHALL SUPPLIER, OWNER OF THE SOFTWARE OR ITS LICENSORS 
BE LIABLE FOR DAMAGES (INCLUDING ANY FOR LOSS OF INFORMATION, PROFITS, SAVINGS 
OR BUSINESS INTERRUPTION OR OTHER DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES) ARISING OUT OF THE SOFTWARE OR THE USE THEREOF, OR THE 
INABILITY TO USE THE SOFTWARE.


Exporting Law
You acknowledge that the export of the Software is governed by the export 
control laws of the United States and other countries. You agree to comply with all such export control laws.


Governing Law and Jurisdiction
If any provision or portion of this Agreement shall be found to be illegal, 
invalid or unenforceable, the remaining provisions shall remain in full force 
and effect. This Agreement shall be governed by the laws of California, USA and is subject to the jurisdiction of the Federal District courts for the Central 
District of California by a judge and not a jury.

------------------------------------------------------------------------

<Requirements>
The RP-GL/2 HDI Printer Driver is supported in any environment supported by AutoCAD. 
There are no other specific requirements. RP-GL/2 HDI Printer Driver Ver1.13 for AutoCAD(LT) 2004/2005/2006 will not work with
any AutoCAD versions except AutoCAD(LT) 2004/2005/2006.
If you are using another version of AutoCAD, please do not use this RP-GL/2 HDI Printer Driver for AutoCAD(LT) 2004/2005/2006. 
Instead, please select the appropriate RP-GL/2 HDI Printer Driver.
Note: We have not released any drivers for AutoCAD R14, AutoCAD LT98, or earlier.
  

<RP-GL/2 HDI Printer Driver Installation>
Prior to installation of the RP-GL/2 HDI Printer Driver:
1) Install a regular printer driver (PS, PCL, or RPCS). This will be used for spooling of jobs and creation of ports. 
    This can be any driver however a tcp/ip port should be used. 
    Other port types might produce unusual results and are therefore not supported.
2) Remove all previous versions of the RP-GL/2 HDI Printer Driver. 
Note: This includes previous versions of RP-GL/2 HDI Printer Drivers for other versions of AutoCAD.
3) AutoCAD(LT) 2004/2005/2006 should already be installed on the system.

Procedure:
-1 Start -> Settings -> Control Panel

-2 Open the "Autodesk Plotter Manager".
Note: This will only be visible if AutoCAD has already been installed.

-3 Open the "Add-A-Plotter" wizard and click Next.

-4 Select "My Computer" and click Next.

-5 Click on "Have Disk" and browse to the folder containing the RP-GL/2 HDI Printer Driver.

-6 Select a driver to install and click Open.

-7 Browse through the list of Manufacturers to find Ricoh Co. Ltd.

-8 Select your model and click Next.

-9 If you have print settings from a previous plotter saved to a pcp or pc2 file, they can be imported now by clicking 
     the <> button. After finishing this step, click next.

-10 Select "Plot to a port" and select the port you wish to plot to and click Next.  
Note: Ports marked "local port" are not supported.

-11 Enter a name for the plotter and click Next..

-12 Follow the messages of the "Add-A-Plotter" wizard.


<RP-GL/2 HDI Printer Driver Uninstallation>
Procedure:
-1 Start -> Settings -> Control Panel

-2 Open the "Autodesk Plotter Manager".
Note: This will only be visible if AutoCAD has already been installed.

-3 Right click on the driver you want to uninstall and select "Delete".

-4 Click OK to confirm the deletion.

Steps 5 - 7 are only necessary if another RP-GL/2 HDI Printer Driver already exists on the system.

-5 Open the "drv" folder within AutoCAD.
E.g. C:\Program Files\AutoCADLT2004\drv

-6 Delete "RPGL2_#.drc" and "RPGL2_#.hdi". (# varies depending on the version of driver)

-7 Install the version that matches that AutoCAD version.

=======================================================================
For more information, please see the product documentation or help files.
=======================================================================
Autodesk, AutoCAD, AutoCAD LT, Heidi are trademarks, registered trademarks, 
or service marks of Autodesk, Inc. in the United States.

Microsoft Windows is a trademark of Microsoft Corporation in the United States.