;; TCG201vc.inf - INF file for Video Interface of TCG201 Camera ;; ;; Copyright (c) 2002, EndPoints Incorporated ; ; IMPORTANT IMPORTANT IMPORTANT IMPORTANT IMPORTANT IMPORTANT IMPORTANT IMPORTANT ; 1. Look for 'ISP_NOTE' for notes regarding HEI ISP vs. Endpoints ISP ; 2. The section 'Video Camera ISP Settings' must be set based on sensor type. ; This is currently set for HEI sensors. [Version] signature = "$CHICAGO$" Class = Image ClassGUID = {6bdd1fc6-810f-11d0-bec7-08002be2092f} Provider = %Provider% CatalogFile = ep402ref.cat LayoutFile = Layout.inf, Layout1.inf, Layout2.inf DriverVer = %DriverVer% [DefaultInstall] CopyFiles=SE402VC.CopySystemDrivers, SE402VC.CopyCODEC [ControlFlags] ; All PnP devices should be excluded from manual AddDevice Applet list ExcludeFromSelect=* [Manufacturer] %Manufacturer%=EPModels [DestinationDirs] DefaultDestDir=10,system ; Delete old Win95 and "Detroit" update drivers SE402VC.DelDrivers=10,system SE402VC.CopySystemDrivers=10,system32\drivers SE402VC.CopyCODEC=11 [SourceDisksNames] 1=%DiskDescription%,TCG201vc.inf,,%DriverSourceDir% [SourceDisksNames.x86] 1=%DiskDescription%,TCG201vc.inf,, [SourceDisksFiles] se402vc.sys = 1 ep_camd.sys = 1 epdxipl.ax = 1 ;--------------------------------------------------------------- ; Endpoints ;--------------------------------------------------------------- [EPModels] %szDeviceDesc%=SE402VC,USB\VID_03E8&PID_2110&MI_00 %szProductDeviceDesc%=Product402VC,USB\VID_03E8&PID_2112&MI_00 %szProduct3DeviceDesc%=Product3402VC,USB\VID_03E8&PID_2114&MI_00 %szProduct4DeviceDesc%=Product4402VC,USB\VID_03E8&PID_2119&MI_00 [PreCopySection] HKR,,NoSetupUI,,1 ;--------------------------------------------------------------- ; SE402 Reference ;--------------------------------------------------------------- [SE402VC] DriverVer= %DriverVer% Include= ks.inf, kscaptur.inf, ksfilter.inf Needs= KS.Registration,KSCAPTUR.Registration,MSPCLOCK.Installation AddReg= SE402VC.AddReg, SE402VC.AddReg.Basic UpdateInis= SE402VC.UpdateIni DelFiles= SE402VC.DelDrivers CopyFiles= SE402VC.CopySystemDrivers, SE402VC.CopyCODEC [SE402VC.NT] Include= ks.inf, kscaptur.inf Needs= KS.Registration,KSCAPTUR.Registration.NT AddReg= SE402VC.AddReg, SE402VC.AddReg.Basic UpdateInis= SE402VC.UpdateIni DelFiles= SE402VC.DelDrivers CopyFiles= SE402VC.CopySystemDrivers, SE402VC.CopyCODEC ;--------------------------------------------------------------- ;--------------------------------------------------------------- ; Productized 402 Camera ;--------------------------------------------------------------- [Product402VC] DriverVer= %DriverVer% Include= ks.inf, kscaptur.inf, ksfilter.inf Needs= KS.Registration,KSCAPTUR.Registration,MSPCLOCK.Installation AddReg= Product402VC.AddReg, SE402VC.AddReg.Basic UpdateInis= SE402VC.UpdateIni DelFiles= SE402VC.DelDrivers CopyFiles= SE402VC.CopySystemDrivers, SE402VC.CopyCODEC [Product402VC.NT] Include= ks.inf, kscaptur.inf Needs= KS.Registration,KSCAPTUR.Registration.NT AddReg= Product402VC.AddReg, SE402VC.AddReg.Basic UpdateInis= SE402VC.UpdateIni DelFiles= SE402VC.DelDrivers CopyFiles= SE402VC.CopySystemDrivers, SE402VC.CopyCODEC ;--------------------------------------------------------------- ;--------------------------------------------------------------- ; Productized 402 Camera ;--------------------------------------------------------------- [Product3402VC] DriverVer= %DriverVer% Include= ks.inf, kscaptur.inf, ksfilter.inf Needs= KS.Registration,KSCAPTUR.Registration,MSPCLOCK.Installation AddReg= Product3402VC.AddReg, SE402VC.AddReg.Basic UpdateInis= SE402VC.UpdateIni DelFiles= SE402VC.DelDrivers CopyFiles= SE402VC.CopySystemDrivers, SE402VC.CopyCODEC [Product3402VC.NT] Include= ks.inf, kscaptur.inf Needs= KS.Registration,KSCAPTUR.Registration.NT AddReg= Product3402VC.AddReg, SE402VC.AddReg.Basic UpdateInis= SE402VC.UpdateIni DelFiles= SE402VC.DelDrivers CopyFiles= SE402VC.CopySystemDrivers, SE402VC.CopyCODEC ;--------------------------------------------------------------- ;--------------------------------------------------------------- ; Productized 402 Camera ;--------------------------------------------------------------- [Product4402VC] DriverVer= %DriverVer% Include= ks.inf, kscaptur.inf, ksfilter.inf Needs= KS.Registration,KSCAPTUR.Registration,MSPCLOCK.Installation AddReg= Product4402VC.AddReg, SE402VC.AddReg.Basic UpdateInis= SE402VC.UpdateIni DelFiles= SE402VC.DelDrivers CopyFiles= SE402VC.CopySystemDrivers, SE402VC.CopyCODEC [Product4402VC.NT] Include= ks.inf, kscaptur.inf Needs= KS.Registration,KSCAPTUR.Registration.NT AddReg= Product4402VC.AddReg, SE402VC.AddReg.Basic UpdateInis= SE402VC.UpdateIni DelFiles= SE402VC.DelDrivers CopyFiles= SE402VC.CopySystemDrivers, SE402VC.CopyCODEC ;--------------------------------------------------------------- ;--------------------------------------------------------------- ; SE402 Reference Camera ;--------------------------------------------------------------- [SE402VC.AddReg] HKR,,WdmDeviceDesc,,%szDeviceDesc% ; this allows TWAIN Driver to support this device HKLM,"Software\Endpoints\TWAIN Data Source\1.0\Cameras\0x03e82110" ; VfW Extension data for IPL HKLM,%szConfigRegistry%,"VfW Extension",0,%GUID_HyundaiISP% HKLM,%szConfigRegistry%,"Downstream IID",0,%IID_IEPVfWExt% ;if last digit = '1', then RGB24 NOT available (to enable, set last digit to '0') HKR,,DisableRGBSupport,3,0 ;if last digit = '1' then I420 support is NOT available (to enable, set last digit to '0') HKR,,DisableI420Support,3,0 ;the last digit overrides the driver's default format according to following table: ; RGB24 = 0 ; I420 = 1 ; ABYR = 6 ; JBYR = 16 ; AJPG = 17 ; LBYR = 18 HKR,,DefaultFormat,3,17 ;these allow the default width/height to be configured (MUST be a supported resolution) HKR,,DefaultWidth,3,0x40,0x01,0,0 HKR,,DefaultHeight,3,0xf0,0,0,0 ;if last digit is '1', zoom is not available and smaller resolutions are not cropped ;HKR,,DisableZoom,1,1 ;if last digit is '1', these disable corresponding function (only valid if zoom IS AVAILABLE) ;HKR,,DisablePan,1,0 ;HKR,,DisableTilt,1,0 ;last number overrides driver's default quality level (1..5) ;HKR,,DefaultQuality,1,4 ;--------------------------------------------------------------- ; Productized 402 Camera ;--------------------------------------------------------------- [Product402VC.AddReg] HKR,,WdmDeviceDesc,,%szProductDeviceDesc% ; this allows TWAIN Driver to support this device HKLM,"Software\Endpoints\TWAIN Data Source\1.0\Cameras\0x03e82112" ; VfW Extension data for IPL HKLM,%szProductConfigRegistry%,"VfW Extension",0,%GUID_HyundaiISP% HKLM,%szProductConfigRegistry%,"Downstream IID",0,%IID_IEPVfWExt% ;if last digit = '1', then RGB24 NOT available (to enable, set last digit to '0') HKR,,DisableRGBSupport,3,0 ;if last digit = '1' then I420 support is NOT available (to enable, set last digit to '0') HKR,,DisableI420Support,3,0 ;the last digit overrides the driver's default format according to following table: ; RGB24 = 0 ; I420 = 1 ; ABYR = 6 ; JBYR = 16 ; AJPG = 17 ; LBYR = 18 HKR,,DefaultFormat,3,17 ;these allow the default width/height to be configured (MUST be a supported resolution) HKR,,DefaultWidth,3,0x40,0x01,0,0 HKR,,DefaultHeight,3,0xf0,0,0,0 ;if last digit is '1', zoom is not available and smaller resolutions are not cropped ;HKR,,DisableZoom,1,1 ;if last digit is '1', these disable corresponding function (only valid if zoom IS AVAILABLE) ;HKR,,DisablePan,1,0 ;HKR,,DisableTilt,1,0 ;last number overrides driver's default quality level (1..5) ;HKR,,DefaultQuality,1,4 ;--------------------------------------------------------------- ; Productized 402 Camera ;--------------------------------------------------------------- [Product3402VC.AddReg] HKR,,WdmDeviceDesc,,%szProduct3DeviceDesc% ; this allows TWAIN Driver to support this device HKLM,"Software\Endpoints\TWAIN Data Source\1.0\Cameras\0x03e82114" ; VfW Extension data for IPL HKLM,%szProduct3ConfigRegistry%,"VfW Extension",0,%GUID_HyundaiISP% HKLM,%szProduct3ConfigRegistry%,"Downstream IID",0,%IID_IEPVfWExt% ;if last digit = '1', then RGB24 NOT available (to enable, set last digit to '0') HKR,,DisableRGBSupport,3,0 ;if last digit = '1' then I420 support is NOT available (to enable, set last digit to '0') HKR,,DisableI420Support,3,0 ;the last digit overrides the driver's default format according to following table: ; RGB24 = 0 ; I420 = 1 ; ABYR = 6 ; JBYR = 16 ; AJPG = 17 ; LBYR = 18 HKR,,DefaultFormat,3,17 ;these allow the default width/height to be configured (MUST be a supported resolution) HKR,,DefaultWidth,3,0x40,0x01,0,0 HKR,,DefaultHeight,3,0xf0,0,0,0 ;if last digit is '1', zoom is not available and smaller resolutions are not cropped ;HKR,,DisableZoom,1,1 ;if last digit is '1', these disable corresponding function (only valid if zoom IS AVAILABLE) ;HKR,,DisablePan,1,0 ;HKR,,DisableTilt,1,0 ;last number overrides driver's default quality level (1..5) ;HKR,,DefaultQuality,1,4 ;--------------------------------------------------------------- ; Productized 402 Camera ;--------------------------------------------------------------- [Product4402VC.AddReg] HKR,,WdmDeviceDesc,,%szProduct4DeviceDesc% ; this allows TWAIN Driver to support this device HKLM,"Software\Endpoints\TWAIN Data Source\1.0\Cameras\0x03e82119" ; VfW Extension data for IPL HKLM,%szProduct4ConfigRegistry%,"VfW Extension",0,%GUID_HyundaiISP% HKLM,%szProduct4ConfigRegistry%,"Downstream IID",0,%IID_IEPVfWExt% ;if last digit = '1', then RGB24 NOT available (to enable, set last digit to '0') HKR,,DisableRGBSupport,3,0 ;if last digit = '1' then I420 support is NOT available (to enable, set last digit to '0') HKR,,DisableI420Support,3,0 ;the last digit overrides the driver's default format according to following table: ; RGB24 = 0 ; I420 = 1 ; ABYR = 6 ; JBYR = 16 ; AJPG = 17 ; LBYR = 18 HKR,,DefaultFormat,3,17 ;these allow the default width/height to be configured (MUST be a supported resolution) HKR,,DefaultWidth,3,0x40,0x01,0,0 HKR,,DefaultHeight,3,0xf0,0,0,0 ;if last digit is '1', zoom is not available and smaller resolutions are not cropped ;HKR,,DisableZoom,1,1 ;if last digit is '1', these disable corresponding function (only valid if zoom IS AVAILABLE) ;HKR,,DisablePan,1,0 ;HKR,,DisableTilt,1,0 ;last number overrides driver's default quality level (1..5) ;HKR,,DefaultQuality,1,4 [SE402VC.AddReg.Basic] HKR,,DevLoader,,*ntkern HKR,,NTMPDriver,,se402vc.sys HKR,,PageOutWhenUnopened,3,01 ; HKR,,PowerDownWhenUnopened,3,01 HKR,,UseBulkMode,1,01 HKR,,DontSuspendIfStreamsAreRunning,3,01 HKR,,PropertySetsID,3,3 ; IEPCameraInformation ; This IID is aggregated for the filter given the CLSID of the property set HKLM,System\CurrentControlSet\Control\MediaInterfaces\{0590D4C0-B6D6-11d2-9D67-00A0CC242499},,,%PlugIn_IEPCameraInformation% HKLM,System\CurrentControlSet\Control\MediaInterfaces\{0590D4C0-B6D6-11d2-9D67-00A0CC242499},IID,1,0xc0,0xd4,0x90,0x05, 0xd6,0xb6, 0xd2,0x11, 0x9d,0x67,0x00,0xa0,0xcc,0x24,0x24,0x99 ; Associate the property set with the property page from epdxipl.ax HKLM,System\CurrentControlSet\Control\MediaSets\%GUID_EPCamControl%\PropertyPages\%GUID_EPCamControlPropertyPage%,,,%EPCamControlPropertyPage% [SE402VC.UpdateIni] system.ini,drivers32,,"VIDC.UV12=epdxipl.ax" [SE402VC.DelDrivers] ks.sys,,,1 stream.sys,,,1 [SE402VC.CopySystemDrivers] se402vc.sys ep_camd.sys [SE402VC.CopyCODEC] epdxipl.ax ;--------------------------------------------------------------- ; 402 Reference Camera ;--------------------------------------------------------------- [SE402VC.Interfaces] AddInterface=%KSCATEGORY_CAPTURE%,GLOBAL,SE402VC.Interface [SE402VC.NT.Interfaces] AddInterface=%KSCATEGORY_CAPTURE%,GLOBAL,SE402VC.Interface.NT [SE402VC.Interface] AddReg=SE402VC.Intf.AddReg.Basic AddReg=SE402VC.Intf.AddReg [SE402VC.Interface.NT] AddReg=SE402VC.Intf.AddReg.Basic AddReg=SE402VC.Intf.AddReg.NT ;--------------------------------------------------------------- ;--------------------------------------------------------------- ; Productized 402 Camera ;--------------------------------------------------------------- [Product402VC.Interfaces] AddInterface=%KSCATEGORY_CAPTURE%,GLOBAL,Product402VC.Interface [Product402VC.NT.Interfaces] AddInterface=%KSCATEGORY_CAPTURE%,GLOBAL,Product402VC.Interface.NT [Product402VC.Interface] AddReg=Product402VC.Intf.AddReg.Basic AddReg=SE402VC.Intf.AddReg [Product402VC.Interface.NT] AddReg=Product402VC.Intf.AddReg.Basic AddReg=SE402VC.Intf.AddReg.NT ;--------------------------------------------------------------- ;--------------------------------------------------------------- ; Productized 402 Camera ;--------------------------------------------------------------- [Product3402VC.Interfaces] AddInterface=%KSCATEGORY_CAPTURE%,GLOBAL,Product3402VC.Interface [Product3402VC.NT.Interfaces] AddInterface=%KSCATEGORY_CAPTURE%,GLOBAL,Product3402VC.Interface.NT [Product3402VC.Interface] AddReg=Product3402VC.Intf.AddReg.Basic AddReg=SE402VC.Intf.AddReg [Product3402VC.Interface.NT] AddReg=Product3402VC.Intf.AddReg.Basic AddReg=SE402VC.Intf.AddReg.NT ;--------------------------------------------------------------- ;--------------------------------------------------------------- ; Productized 402 Camera ;--------------------------------------------------------------- [Product4402VC.Interfaces] AddInterface=%KSCATEGORY_CAPTURE%,GLOBAL,Product4402VC.Interface [Product4402VC.NT.Interfaces] AddInterface=%KSCATEGORY_CAPTURE%,GLOBAL,Product4402VC.Interface.NT [Product4402VC.Interface] AddReg=Product4402VC.Intf.AddReg.Basic AddReg=SE402VC.Intf.AddReg [Product4402VC.Interface.NT] AddReg=Product4402VC.Intf.AddReg.Basic AddReg=SE402VC.Intf.AddReg.NT ;--------------------------------------------------------------- ;--------------------------------------------------------------- ; SE402 Reference Camera ;--------------------------------------------------------------- [SE402VC.Intf.AddReg.Basic] HKR,,CLSID,,%ProxyVCap.CLSID% HKR,,FriendlyName,,%szDeviceDesc% HKR,,ExtensionDLL,,%EP.ExtensionDLL% ; this overrides the standard camera control property page with Endpoints' page HKR,PageAliases,"{71F96465-78F3-11d0-A18C-00A0C9118956}",1,0x1c,0xd3,0xeb,0x96,0xa9,0x05,0x5c,0x43,0x9a,0x5f,0xf4,0x75,0xdc,0x45,0xe4,0xc9 ; IAMVideoCompression - Install this as a static interface on our video capture pin HKR,PinFactory\0\Interfaces\{C6E13343-30AC-11d0-A18C-00A0C9118956},,,{C6E13343-30AC-11d0-A18C-00A0C9118956} ;--------------------------------------------------------------- ; Productized 402 Camera ;--------------------------------------------------------------- [Product402VC.Intf.AddReg.Basic] HKR,,CLSID,,%ProxyVCap.CLSID% HKR,,FriendlyName,,%szProductDeviceDesc% HKR,,ExtensionDLL,,%EP.ExtensionDLL% ; this overrides the standard camera control property page with Endpoints' page HKR,PageAliases,"{71F96465-78F3-11d0-A18C-00A0C9118956}",1,0x1c,0xd3,0xeb,0x96,0xa9,0x05,0x5c,0x43,0x9a,0x5f,0xf4,0x75,0xdc,0x45,0xe4,0xc9 ; IAMVideoCompression - Install this as a static interface on our video capture pin HKR,PinFactory\0\Interfaces\{C6E13343-30AC-11d0-A18C-00A0C9118956},,,{C6E13343-30AC-11d0-A18C-00A0C9118956} [SE402VC.Intf.AddReg] HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,"Register_EP_Directx_Codec",,"regsvr32.exe /s %11%\epdxipl.ax" [SE402VC.Intf.AddReg.NT] HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,"Register_EP_Directx_Codec",,"rundll32.exe %11%\epdxipl.ax,DllRegisterServer" ;--------------------------------------------------------------- ; Productized 402 Camera ;--------------------------------------------------------------- [Product3402VC.Intf.AddReg.Basic] HKR,,CLSID,,%ProxyVCap.CLSID% HKR,,FriendlyName,,%szProduct3DeviceDesc% HKR,,ExtensionDLL,,%EP.ExtensionDLL% ; this overrides the standard camera control property page with Endpoints' page HKR,PageAliases,"{71F96465-78F3-11d0-A18C-00A0C9118956}",1,0x1c,0xd3,0xeb,0x96,0xa9,0x05,0x5c,0x43,0x9a,0x5f,0xf4,0x75,0xdc,0x45,0xe4,0xc9 ; IAMVideoCompression - Install this as a static interface on our video capture pin HKR,PinFactory\0\Interfaces\{C6E13343-30AC-11d0-A18C-00A0C9118956},,,{C6E13343-30AC-11d0-A18C-00A0C9118956} ;--------------------------------------------------------------- ; Productized 402 Camera ;--------------------------------------------------------------- [Product4402VC.Intf.AddReg.Basic] HKR,,CLSID,,%ProxyVCap.CLSID% HKR,,FriendlyName,,%szProduct4DeviceDesc% HKR,,ExtensionDLL,,%EP.ExtensionDLL% ; this overrides the standard camera control property page with Endpoints' page HKR,PageAliases,"{71F96465-78F3-11d0-A18C-00A0C9118956}",1,0x1c,0xd3,0xeb,0x96,0xa9,0x05,0x5c,0x43,0x9a,0x5f,0xf4,0x75,0xdc,0x45,0xe4,0xc9 ; IAMVideoCompression - Install this as a static interface on our video capture pin HKR,PinFactory\0\Interfaces\{C6E13343-30AC-11d0-A18C-00A0C9118956},,,{C6E13343-30AC-11d0-A18C-00A0C9118956} ;--------------------------------------------------------------- ; SE402 Reference Camera ;--------------------------------------------------------------- [SE402VC.NT.Services] AddService = Aox402Camera,0x00000002,SE402VC.ServiceInstall [SE402VC.ServiceInstall] DisplayName = %szDeviceDesc% ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_DEMAND_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\se402vc.sys ;--------------------------------------------------------------- ; Productized 402 Camera ;--------------------------------------------------------------- [Product402VC.NT.Services] AddService = Aox402Camera,0x00000002,Product402VC.ServiceInstall [Product402VC.ServiceInstall] DisplayName = %szProductDeviceDesc% ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_DEMAND_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\se402vc.sys ;--------------------------------------------------------------- ; Productized 402 Camera ;--------------------------------------------------------------- [Product3402VC.NT.Services] AddService = Aox402Camera,0x00000002,Product3402VC.ServiceInstall [Product3402VC.ServiceInstall] DisplayName = %szProduct3DeviceDesc% ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_DEMAND_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\se402vc.sys ;--------------------------------------------------------------- ; Productized 402 Camera ;--------------------------------------------------------------- [Product4402VC.NT.Services] AddService = Aox402Camera,0x00000002,Product4402VC.ServiceInstall [Product4402VC.ServiceInstall] DisplayName = %szProduct4DeviceDesc% ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_DEMAND_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\se402vc.sys [Strings] ;---------------- ; Non-Localizable ;---------------- ; note: only registry value is case sensitive, key is not. ProxyVCap.CLSID = "{17CCA71B-ECD7-11D0-B908-00A0C9223196}" KSCATEGORY_CAPTURE = "{65E8773D-8F56-11D0-A3B9-00A0C9223196}" SERVICE_KERNEL_DRIVER = 1 SERVICE_DEMAND_START = 3 ; PnP should use demand start SERVICE_ERROR_NORMAL = 1 EP.ExtensionDLL = "epdxipl.ax" ; these are for custom property page GUID_EPCamControl="{0590D4C0-B6D6-11d2-9D67-00A0CC242499}" GUID_EPCamControlPropertyPage="{A6777D80-5B91-11d2-9D64-00104B6DC9C2}" ; this is the Hyundai ISP COM Server GUID GUID_HyundaiISP="{90334840-CC22-11d2-9D67-00A0CC242499}" ; this is the interface ID for IEPVfWExt IID_IEPVfWExt="{A33E54E0-1504-11d3-9D6A-00104B6DC9C2}" ;---------------- ; Localizable ;---------------- Provider = "EndPoints, Inc." Manufacturer = "TCG" ;------------------------------------------------------------- ;NOTE: if the device description changes, it may require a change ;to the f/w updater INI file as well szDeviceDesc = "TCG201 Video Camera (WDM)" szProductDeviceDesc = "TCG201 Video Camera (WDM)" szProduct3DeviceDesc = "TCG201 Video Camera (WDM)" szProduct4DeviceDesc = "TCG201 Video Camera (WDM)" ;------------------------------------------------------------- EPCamControlPropertyPage="Endpoints Custom CamControl Property Page" HyundaiCameraControlPropertyPage="Hyundai Camera Control Property Page" HyIAMVideoProcAmpPropertyPage="Hyundai IAMVideoProcAmp Property Page" HyIAMCameraControlPropertyPage="Hyundai IAMCameraControl Property Page" EPIAMVideoProcAmpPropertyPage="Endpoints IAMVideoProcAmp Property Page" EPIAMCameraControlPropertyPage="Endpoints IAMCameraControl Property Page" PlugIn_IEPCameraInformation="IEPCameraInformation Interface Handler" szConfigRegistry = "Software\Endpoints\Video IPL\1.0\Cameras\0x03e82110" szProductConfigRegistry = "Software\Endpoints\Video IPL\1.0\Cameras\0x03e82112" szProduct3ConfigRegistry = "Software\Endpoints\Video IPL\1.0\Cameras\0x03e82114" szProduct4ConfigRegistry = "Software\Endpoints\Video IPL\1.0\Cameras\0x03e82119" DiskDescription="TCG201 Drivers Disk" DriverSourceDir="c:\tcg\tcg201" DriverVer=06/10/2002,1Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.