1. tepcipb.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (tepcipb.exe)

           TRENDware TE-PCI/TE-100PCI Ethernet Adapter Installation
                   for Windows 95

 Contents
 ÄÄÄÄÄÄÄÄ
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
    Windows 95 offers the easiest installs for any OS/NOS in the industry.
    Since it has drivers(for DECchip) that are not compatible with your
    PCI Adapter (TRENDware TE-PCI/TE-100PCI Ethernet Adapter), please use the driver in
    this released diskette.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
     A PCI compatible computer
     Microsoft's Windows 95
     A PCI Family Series Adapter
     A knowledge of basic Win 95 commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     A knowledge of basic Win 95 commands
     A knowledge of editing text files
     A knowledge of Win 95 basic file structure
     A knowledge of the network driver configuration being used

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     For a motherboard compatibility list,please consult your local
      Branch Office

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

    The Windows 95 installation disks or CD are needed to complete this
    install.

 Extract the driver for Win95 from the driver diskette
 _____________________________________________________

    Get the DOS prompt if you are in Win95. Insert the driver diskette in
    the floppy drive and change the current drive to the floppy drive (ie,
    C:\>a: then press "Enter"). Type in install.exe then press the Enter key
    (ie. A:\>install.exe then press "Enter").
    Follow the instructions on the screen and select "Customized Installation",
    then select "Microsoft Windows 95". The files that you need will be
    copied to the path shown on the screen (ie. C:\WIN95).

 Using adapter driver
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÿ4

  @@@@ "DO NOT" install the adapter in the computer yet. @@@@
       Boot the computer to Win95.

     Open "My Computer" -> "Control Panel" -> "Networks" icons.
      If any of the following strings exist,

         "PCI Ethernet DECchip 21040 Based Adapter"
         "PCI Fast Ethernet DCEchip 21140 Based Adapter"
         "PCI Ethernet DECchip 21041 Based Adapter"

      You are currently using the Windows 95 built-in DECchip driver.
      Please REMOVE all of them before continue the following steps.

     Select "Add adapter" -> "Have disk" items.
      Type the following (assume the driver is located at C:\WIN95)

            C:\WIN95

      Select the correct driver according to your adapter type.

     Windows 95 will copy the driver files from the released driver disk.
      At this monent, Windows 95 will also copy the necessary files from
      the Windows 95 CD-ROM. Prepare your Windows 95 CD-ROM or floppies
      for this process.

     After finishing file copy, Windows 95 will ask you to reboot the PC.
      Select "No". Then click on "Start", click on "Shoutdown". Turn the
      computer off when it is safe to do so. Install the Ethernet adapter
      into the computer, then connect your network cable to the Ethernet
      adapter. Power the computer back on.

     During Windows 95 bootup, Windows 95 will automatically detect the
      network adapter.  You don't have to do anything at this point.

     After this automatic process, Windows 95 should proceed to complete
      boot up process and your network adapter should work normally.

     If the adapter does not work at this point, check the adapter
      under Device Manager:

            Open "My Computer" -> "Control Panel" -> "System" icons
            select  "Device Manager" tab.  Select "View devices by type",
            highlight the PCI network adapter, then select properties.
            If there are any problems, there will be a message under
            "Device status".


 Trouble Shooting
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

      Everything is OK in Device Manager, but network adapter still does't
       function properly. Please make sure that your Computer name is
       different from others in the same network.  You can change your
       Computer name in

       "My Computer" -> "Control Panel" -> "Network" ->
       "Identification" icons

      Everything appears to be OK but network adapter still doesn't
       function properly. Please make sure that the adapter is properly
       connected to a network device (ex: HUB) and the "connection type"
       for this adapter is set to "AutoSense" or the correct media type.
       You can check it in

       "My Computer" -> "Control Panel" -> "Network" -> "Properties" icons
       Select "Advanced" item


 Driver keywords
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

      Open "My Computer" -> "Control Pannel" -> "Network" ->
       Double click "TE-100PCI .."
       Select "Advanced" item.

       Connection Type      Specify the connection type for the adapter.
                            Default: AutoSense

       Network Address      You can set the Ethernet address for your
                            adapter. It is not recommended to use this
                            keyword. As you know two or more adapter in
                            the same network with same Ethernet address
                            will cause a little problem.

                            When using this keyword you need to input
                            exactly 6 bytes of Ethernet address using one
                            of the following format:

                              xx-xx-xx-xx-xx-xx
                            OR
                              xxxxxxxxxxxx

                            Default: read address from adapter ROM.