README.TXT Driver File Contents (tepcipb.exe)

           TRENDware TE-PCI/TE-100PCI Ethernet Adapter Installation
                   for Windows NT V3.51

 Contents
 ÄÄÄÄÄÄÄÄ
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
     A PCI compatible computer
     Windows NT V3.51
     A PCI Family Series Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      Branch Office

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

    The Windows NT CD/disks are needed to complete this installation

         From the "Main" window, select "Control Panel"

         In the "Control Panel", select "Network" Icon

         In the "Network settings", select "Add Adapter.."

    Windows NT will display a list of all available drivers.

         Select "Other" for third-party adapters not included in the list.

         Type the following (assume the driver is locatedat C:\NT351)

          C:\NT351

          Select the correct driver according to your adapter type

         Windows NT will attempt to locate the OEMSETUP.INF file in the
          specified path. If it exists there, Windows NT will then copy the
          appropriate drivers to the Windows NT system.

         The drivers are now properly installed.  The installation procedure
          will then proceed to the next steps. Please refer to your Windows NT
          installation guide for information on these steps.

         A window will appear allowing you to specify your network connection
          type and specify the network address.

          Choose the "AutoSense" option.
          The driver will auto-detect the media that is connecting to the
          adapter.

          Add nothing in the NetworkAddress field. The driver will use the
          default unique ethernet address that written in the adapter's
          PROM. If you want to change the ethernet address use the following
          format:
                   xx-xx-xx-xx-xx-xx
                OR
                   xxxxxxxxxxxx

         After the initial installation, the drivers will be permanently
          installed to the Windows NT system.  Subsequent accesses to the
          network driver list will include these drivers as options.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.65