TRENDware TE-PCI/TE-100PCI Ethernet Adapter Installation
for MS LAN Manager
Contents
ÄÄÄÄÄÄÄÄ
Introduction
Requirements
Minimum Skill Level
Getting Started
Introduction
ÄÄÄÄÄÄÄÄÄÄÄÄ
This installation assumes that the adapter is working properly.
Getting Started will describe the installation instructions.
Requirements
ÄÄÄÄÄÄÄÄÄÄÄÄ
A PCI compatible computer
LAN Manager 2.x
A PCI Family Series Adapter
A knowledge of basic DOS\OS/2 commands and editing text files
Minimum Skill Level
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
A knowledge of basic DOS\OS/2 commands
A knowledge of editing text files
A knowledge of DOS\OS/2 basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
A knowledge of the network driver configuration being used
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
DOS Installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
The MS LAN Manager provides a SETUP.EXE program in the setup diskette
for specifying a driver for the Ethernet adapter.
To install a driver for DOS (see OS/2 below), follow these steps:
If you are installing LAN Manager for the first time, answer "Yes"
when prompted for the importation of additional network drivers.
This prompt appears right after completion of the workstation
installation.
If LAN Manager is already installed in your hard disk, select
"Add New Config" from the Configuration menu. Then, select
"Other Driver".
Insert the driver diskette in Drive A and follow the instructions on
the screen. The SETUP program will copy the necessary NDIS driver
programs from the driver diskette into your hard disk; that is, into
the LAN Manager directory. (PATH=C:\LANMAN.DOS, if install specify)
After completion of SETUP, your CONFIG.SYS file will be modified to
reflect the NDIS driver programs.
Reboot your system to affect the changes.
OS/2 Installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
The MS LAN Manager provides a SETUP.EXE program on the setup diskette
for installing a driver for the Ethernet adapter.
Run SETUP.EXE from the LAN Manager diskettes
For a first time installation, answer "Yes" when prompted for the
installation of additional network drivers. This prompt appears
after completion of the workstation installation.
If LAN Manager is already installed in your hard disk, select
"Add New Config" from the Configuration menu.
Select "Other Drivers".
Insert the driver diskette in Drive A and follow the instructions on
the screen.
After completion of SETUP, your CONFIG.SYS file will be modified to
reflect modfications.
Reboot your system to affect the changes.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.