TRENDware TE-PCI/TE-100PCI Ethernet Adapter Installation
for 3Com 3+ Open Share
Contents
ÄÄÄÄÄÄÄÄ
Introduction
Requirements
Minimum Skill Level
Getting Started
Introduction
ÄÄÄÄÄÄÄÄÄÄÄÄ
This installation assumes that the adapter is working properly.
Getting Started will describe the installation instructions.
Requirements
ÄÄÄÄÄÄÄÄÄÄÄÄ
A PCI compatible computer
3COM 3+ Open Share
A PCI Family Series Adapter
A knowledge of basic DOS commands and editing text files
Minimum Skill Level
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
A knowledge of basic DOS commands
A knowledge of editing text files
A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
A knowledge of the network driver configuration being used
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Install 3Com 3+ Open with support for 3Com's 3C501 adapter cards.
Copy the TEPCI.DOS file into the C:\3OPEN\DOSWKSTA\LANMAN\DRIVERS
directory.
Modify the corresponding device driver statement for the 3C501 card in
your CONFIG.SYS as follows:
device = c:\3open\doswksta\lanman\drivers\TEPCI.DOS
Modify the PROTOCOL.INI file as follows:
[ETHERLINK]
:
drivername = TEPCI$
:
Reboot your system let the new configuration take effect.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.