; ; ; Project ...........: KODAK EASYSHARE 5000 Series All-in-One Printer ; ; Setup File ........: EKIJ5000.ini ; ; (C)opyright 2006 by Eastman Kodak Company ; All rights reserved. ; [OEMFiles] OEMConfigFile1=EKIJ5000UIP.DLL OEMDriverFile1=EKIJ5000RRS.DLL [UIPSETTINGS] UIPTYPEDOCUMENT=2 UIPTYPEPRINTER=2 [NTFIXES] ;Right now the driver adjust the brush origin to account for a bug in UNIDRV. ;When UNIDRV gets fixed, enabled the following line, so the fix is switched off. ;To Enable the line, remove the leading semi-colon ;ADJUSTBRUSHORG=0 [FORMATSETTINGS] ; set BUFFERPAGE=x where ; 0 don't wait till full page to print (default) ; 1 buffer a full page before beginning print ;BUFFERPAGE=1 [MEDIATYPE] ; Force Media Type selection to be enabled ; 0 If Advanced printing not disabled, media selection is not enabled. ; 1 Media Type selection always available ;FORCEMEDIATYPEUP=1 ; FUse size to determine tray selection to be enabled ; 0 Always use main tray ; 1 4x6 and 5x7 will use phot tray ;USESIZETODETERMINETRAY=1 [DUPLEX] ; Force Duplexer installed ; 0 If duplexer not detect, not installed when bidi available ; 1 Duplexer is always available even if not installed for support of DV1 Duplexers. ;FORCEDUPLEXERINSTALLED=1 ; Force Duplexer for every media type ; 0 If media type is not paper, duplexer is disabled ; 1 Duplexer is always available even if other media is detected ;FORCEDUPLEXERMEDIATYPE=1 ; DRYTIME_[Time] ; The time in seconds after the followind keys are used for duplex drytime ;DRYTIME_VERY_SHORT=0 ;DRYTIME_SHORT=5 ;DRYTIME_NORMAL=10 ;DRYTIME_LONG=20 ;DRYTIME_VERY_LONG=30 [LOGGING] ; Log media statuses and events ; 0 don’t write log (default) ; 1 write events out to c:\EKIJ5000.log ;LOG=1 ; Specify what file to writ the log to the default is C:\EKIJ5000.LOG ;LOGFILE=C:\TEMP\EKIJ5000.LOG ; Create PRN files ; Output the print job to a file while sending to printer ; 0 don’t write file ; 1 write file to c:\EKIJ5000_xxx.prn ;OUTPUTFILE=1 ; Specify the number of files to save for during collection, the default is 3. ;OUTPUTFILEMAX=3 ; Specify the directory to output the prn files, the default is C: ;OUTPUTDIR=C:\TEMPDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.