1. jvcvnet.zip Driver
2. Vnetst.ini File Contents

Vnetst.ini Driver File Contents (jvcvnet.zip)

[Address]
IP=192.168.1.2

[Open String]
Title=V.Net Setup Tool
Comment=Start to V.Net set up.
IP=Connection IP address.
OK=OK
Cancel=Cancel
Search=Search

[VnetSearch String]
ListTitle=V.Net IP Address List
SearchTitle=Search
TimeOutMsg1=TimeOut
TimeOutMsg2=Sec
SearchButton=Search
CloseButton=OK
SearchWait=Now Searching
SearchEffect=V.Net(s) found

[PassChk String]
Title=V.Net Setup Tool
Comment=Password has been set.
PassWord=Connection password.
OK=OK
Cancel=Cancel

[Password String]
Title=V.Net Setup Tool
OldPass=Current password.
NewPass=New password.
NewPassRep=Confirm password.
OK=OK
Cancel=Cancel

[Setting String]
Title=V.Net Setup Tool
IPText=IP address
SubText=Subnet Mask
MACText=MAC address
CamIDText=Camera ID
VsbRevText=Image View
VsbRevType1=Normal
VsbRevType2=Upside Down
FreqText=Frequency
FreqType1=50Hz
FreqType2=60Hz
PassText=Password
OK=OK
Cancel=Cancel

[Application Error Msg]
-1001=Please type 0 - 255.
-1051=Inconsistent password.
-1052=Inconsistent current password.
-1053=Inconsistent confirm password.
-1100=Are you sure you want to set up?
-1101=Do you want to change the password?
-1201=Incorrect IP address.

[System Error Msg]
-1=Time out.
-2=Inconsistent password.
-3=Can not secure memory area.
-4=Winsock does not exist.
-5=Wrong IP address of destination.
-6=Failed to make socket.
-7=Socket error.
-10=1st parameter error.
-11=2nd parameter error.
-12=3rd parameter error.
-13=4th parameter error.
-14=5th parameter error.
-15=Set up failure.
-20=Can not start forward (receive) data.
-21=Can not start forward (transmit) data.
-22=Data error.
-23=Can not capture.
-30=The origin is on the move.
-40=Failed to receive frame size.
-41=Failed to set up frame size.
-50=Failed to receive Q table.
-51=Failed to set up Q table.
-52=Failed to receive compression scaling factor.
-53=Failed to set up compression scaling factor.
-60=Capture always start.
-61=Capture was stop.
-100=Internal error.(Incorrect address-pointer.)
-101=Internal error.(Not secure memory area.)
-200=Internal error.(cl_port_open not call.)

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.