README.TXT Driver File Contents (dme336T_driver_040200.exe)

DME336T Ethernet/Fax/Modem                                           May 1996

		      Installation for Microsoft Windows 95

  Contents
  ÄÄÄÄÄÄÄÄ
       Introduction
       Getting Started
       Troubleshooting
       Support Options
       Copyrights, Trademarks, and Disclaimers

  Introduction
  ÄÄÄÄÄÄÄÄÄÄÄÄ
       Windows 95 provides a complete "Plug n' Play" System that will
       automatically recognize and configure most PC Cards. 

       Before inserting your DME336T PC Card, the system's PCMCIA chipset
       must be enabled and functioning. The PCMCIA chipset is responsible
       for controlling the systems interface for PC Cards. Please consult 
       the system's manual or manufacture for use with Windows 95.

       Multifunction PC Cards put a heavy demand on a system's resources. 
       Please resolve all system conflicts, errors, and Windows 95 issues
       before installing the DME336T.

       Please have the installation media for the Windows 95 ready for
       any request for files.

  Getting Started
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
       With the system off, remove all PC Cards

       Start/Boot Windows 95
	
       Remove any previous Network Setup
	     -Press the START button on task bar
	     -Select SETTINGS
	     -Select CONTROL PANEL
	     -Select NETWORK SETTINGS
	     -Highlight each network support entry and press REMOVE
	     -After all network support is removed, press OK
	
       Insert the DME336T into one of the system's PCMCIA Slots
	
       A "New Hardware Found" dialog box should appear, see 
	troubleshooting if the dialog box doesn't appear.

       Select "Driver from disk provided by hardware manufacturer"

       Insert the DME336T driver disk in drive A:

       Type in the path name A:\WIN95

       Because the device is multifunction, the system will repeat 
	the "New Hardware Found" a few times. Please repeat the same
	steps for each request made by the system.

       The Window 95 PCMCIA installation will add Netware and Microsoft 
	network support automatically. Any network support can be adjusted
	by the Network Support in the Control Panel.

  Troubleshooting
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
       If the "New Hardware Found" dialog box doesn't appear.
	     -Run REGEDIT
	     -Select "HKEY_LOCAL_MACHINE"
	     -Select "Enum"
	     -Select "PCMCIA"
             -Highlight the folder "D-Link-DME336T-XXXX"
	     -Press the <Delete> key to delete the association  

  Support Options
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
       We are consistently improving and upgrading our drivers. you are
       welcomed at any time to browse through our BBS, and download any
       drivers, utilities and help files.

       If you still cannot get the DME336T working properly, our
       technical experts are always ready to help.  Please be at your
       computer, have your DME336T, Drivers Disk, and the following
       information available:

       * Version number of any drivers you are running
       * The extact text of any error message displayed on your screen
       * The type of computer
       * The type of network

  Copyrights, Trademarks, and Disclaimers
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
  All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT
  are rights reserved by Microsoft Corporation

  All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are
  rights reserved by Novell Corporation

  Further rights reserved to their respective corporations

	
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.27