DME336T Ethernet/Fax/Modem May 1996 Manual Update Supplement !!!!!!Note!!!!!!! For a quick start simply run INSTALL.EXE on the root of this Driver disk. !!!!!!!!!!!!!!!!! This document contains information that supplements the "User's Manual" and accompanying software. The User's Manual can be found in the root of the driver disk as MANUAL.TXT. Contents ÄÄÄÄÄÄÄÄ Introduction PCMCIA Driver Installation Getting Started EMM386 Usage with DME336T Driver Directory Structure Support Options Copyrights, Trademarks, and Disclaimers Introduction ÄÄÄÄÄÄÄÄÄÄÄÄ Thank you for purchasing the DME336T Ethernet/Fax/Modem PC Card. This diskette has network driver support for the DME336T Ethernet/Fax/Modem PC Card. There is a format change for this driver disk. All README's have been reformatted, an easy setup program, and consistency on all documentation provided. We hope our new readme's and installation will minimize the users effort to make our products work. Should you have further recommendations please contact the support manager. Install PC Card Software Manually ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The installation software has been carefully designed to detect a combination of hardware and software installed on the PC. Proper detection will allow the PC's PC Card drivers to enable the DME336T. If the installation software fails to complete, the enabler will need to be manually copied from the driver disk to the PC. The follow the next few steps for instructions If Windows for Workgroup 3.11, Windows NT, Windows 95, or Windows 98 are used, follow the instructions for installing PC Cards in the PC's manual. Determine if any third party generic enablers installed on the PC. These are identified by a search through the CONFIG.SYS file for the following lines: Vendor Device Loaded in CONFIG.SYS --------------- ------------------------------- Awards Software DEVICE=C:\CARDWARE\PCENABLE.EXE System Soft DEVICE=C:\CARDSOFT\CARDID.EXE Phoenix DEVICE=C:\PCMPLUS\PCMSCD.EXE If one of these exist in your CONFIG.SYS, it can be used to enable the DME336T Ethernet/Fax/Modem PC Card. Follow the PCMCIA driver installation instructions in the PC's manual. If the PC Card drivers do not support multi-function cards, please use the included enabler. Disable all current PC Card drivers by editing the CONFIG.SYS and AUTOEXEC.BAT. If it is necessary to keep these drivers for other adapters skip to next section. Insert Driver Disk in drive A:. Type C: at the command prompt. Type MD DMECARD to make a new directory. Type COPY A:\ENABLER\*.* C:\DMECARD to copy the enabler to your directory. Modify the PATH= statement in your AUTOEXEC.BAT to include path C:\DMECARD. Change From PATH=<Original Path> To PATH=<Original Path>;C:\DMECARD Use the CARDEN.EXE to enable DME336T when the PC is loading Card Services. Getting Started ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ For Novell, Lan Manager, and Packet Driver, first insert the DME336T Ethernet/Fax/Modem PC Card into one of the free PCMCIA card slots, remove all other PC Cards from your machine. Then insert the "DME336T Drivers Disk" into drive A, and type A:\INSTALL at the command prompt. The installation program will copy files to the destination directory and modify your related files(CONFIG.SYS, AUTOEXEC.BAT, and NET.CFG). For Windows for Workgroup, Windows NT ,Windows 95 & Windows 98 use the "Network Setup" utility provided by windows system to install the DME336T. On this disk you will find sub-directories for each of the Microsoft products. Each directory has a README.TXT that will help install that particular Microsoft product. After installation, simply reboot the machine to enable the DME336T. EMM386 Usage with DME336T ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Under PCMCIA all I/O cards (including Ethernet and Modem) must be initialized as memory cards and then switched into I/O mode operation by an enabler software. Therefore, the enabler software (such as CARDEN.EXE) must see the PC Card memory when it is executed. DOS extended memory managers such as EMM386 and QEMM take control of the PC memory space which effects PC Card initialization. There are two solutions available: 1) Run enabler (CARDEN or existing PC Card drivers + CARDEN) before EMM386 or QEMM is loaded. 2) Exclude at least 4K of memory from EMM386's or QEMM's use. An exclusion of X=D000-D3FF will work well.There may also be additional exclusions for your PCMCIA drivers, don't modify these. Driver Directory Structure ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The network drivers on this disk is organized in the following structure. Each directory contains a README.TXT file which provides you with detailed installation instructions for drivers in that directory: DME336T Diskette Release 05/01/96 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ CARDEN.EXE Direct PCMCIA Card Enabler for DOS, supports DME336T and Intel compatible, Compaq and Databook controllers. LMODI.COM DME336T DOS/ODI Driver working with direct enabler(LAN & MODEM run concurrently). Supports Intel compatible, Compaq and Databook controllers. LMNDIS.DOS DME336T DOS real mode NDIS Driver LMPD.COM DME336T DOS real mode Packet Driver LMNDIS.386 DME336T Enhance Mode NDIS Driver for Win for Workgroups LMNDIS.SYS LanModem Enhance Mode NDIS Driver for Windows 95 & 98. LMNDIS.SYS DME336T Enhance Mode NDIS Driver for Windows NT. Support Options ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ We are consistently improving and upgrading our drivers. you are welcomed at any time to browse through our BBS, and download any drivers, utilities and help files. If you still cannot get the DME336T working properly, our technical experts are always ready to help. Please be at your computer, have your DME336T, Drivers Disk, and the following information available: * Version number of CARDEN.EXE and any drivers you are running * The extact text of any error message displayed on your screen * The type of computer * The type of network For technical support, you may contact your authorized D-Link distributor, dealer, or the following D-Link headquarters: In U.S.A. Tel: +1(949)455-1688 Fax: +1(949)455-2521 BBS: +1(949)455-1779 BBS: +1(949)455-9616 In Canada Tel: +1(905)828-0260 Fax: +1(905)828-5669 BBS: +1(905)828-6673 In U.K. & Europe Tel: +44(181)235-5555 Fax: +44(181)235-5500 BBS: +44(181)235-5511 In Germany Tel: +49(6196)643011 Fax: +49(6196)28049 BBS: +49(6196)28378 In Asia, Taiwan Tel: +886(2)916-1600 Fax: +886(2)914-6299 BBS: +886(2)910-1835 In France Tel: +33(1)30238688 Fax: +33(1)3028689 In Australia Tel: +61(2)4177100 Fax: +61(2)4171077 BBS: +61(2)4173711 In Nordic Tel: +46(40)163330 Fax: +46(40)163340 BBS: +46(40)163343 In Singapore Tel: +657746233 Fax: +657746322 BBS: +657744787 In China Tel: +86(10)4934175 Fax: +86(10)4991648 In Tokyo Tel: +81(3)57512351 Fax: +81(3)57512352 In India Tel: +91(22)6172478 Fax: +91(22)6172476 The BBS communication setup information is as follows : Speed: 2400-14400 baud - Germany 2400-9600 baud - Asia,Taiwan 14400-16800 baud - Canada 9600-14400 baud V32, V32bis, V42, V42bis - U.S.A. 2400-19200 baud V24, V32, V32bis, V42bis - U.K. & Europe Parity: None Data bits: 8 Stop bit : 1 Copyrights, Trademarks, and Disclaimers ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ All references to MS, Windows, Win95, Windows 95, Windows 98, Windows NT, WinNT are rights reserved by Microsoft Corporation All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights reserved by Novell Corporation Further rights reserved to their respective corporationsDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.