DOSODI.TXT Driver File Contents (dme336T_driver_040200.exe)

DME336T Ethernet/Fax/Modem                                         May 1996

		    Netware DOS ODI Driver installation

  Contents
  ÄÄÄÄÄÄÄÄ
       Introduction
       Getting Started
       Support Options
       Copyrights, Trademarks, and Disclaimers

  Introduction
  ÄÄÄÄÄÄÄÄÄÄÄÄ
       The ODI driver program allows you to run multiple protocol stacks
       and install up to two network adapters in a workstation. This ODI
       driver supports the Port, Node Address, Protocol and Frame 
       options for creating your own NET.CFG file. For more information 
       on these keywords, please refer to Novell's "NetWare ODI shell for 
       DOS - NET.CFG options". This installation assumes that the PCMCIA 
       drivers are working properly.

  Getting Started
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
       There are two methods, manual installation (for NW 3.11 wks) and
       Novell Client install (for NW 3.12 & 4.x)
       
       Manual Installation
       ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
       Copy the LMODI.COM file from this diskette into the Netware
	client directory containing Novell's LSL.COM, IPXODI.COM and
	NETx.COM files.
       
       Follow Novell's instructions on using ODI programs. You can
        substitute the LMODI.COM whenever a reference is made to the
	Hardware Specific Module.
       
       A typical ODI workstation startup batch file includes:
       
	>LSL           ; Link Support Layer Module provided by Novell
        >LMODI       ; Hardware Specific Module
	>IPXODI        ; IPX Protocol Stack Module provided by Novell
	>NETx          ; DOS Shell Support Module provided by Novell
	>LOGIN
       
       Novell Client Installation
       ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
       Run the NetWare Client Install v1.21
       
	    -Get the 4 Client disks from the network administrator
	    or
	    -Run the \NWCLIENT\INSTALL.EXE in a previous installation
       
       A message appears on the screen asking you whether or not you
	want the program to perform modifications on your AUTOEXEC.BAT
	and CONFIG.SYS files.
       
       Answer "Yes".  The program then modifies your AUTOEXEC.BAT and
	CONFIG.SYS files accordingly and creates backup copies.
       
       The following message appears:
	  -Install support for MS Windows? (Y/N):
       
       Answer accordingly and provide a path if necessary.
       
       The program displays the following:
	   -Configure the workstation for backup by a NetWare server
	    running software such as SBACKUP? (Y/N): No
       
       Answer accordingly and provide a path if necessary.
       
       Select a driver for your network board.
       
       From the driver list, select "Other Drivers".
       
       Go to the Insert the Driver Disk dialog box and specify the path
	    where the ODI driver and INS files reside.
	  
	    For example:  C:\ODI.DOS.
       
       Press Enter and select the target ODI driver.
       
       Specify the driver's optional settings.
       
       Press F10 to save to new configuration.
       
       Highlight "Install press here" and press <Enter> to install.
       
       The program copies the necessary files for NetWare Client.
       Continue the installation procedure to completion. Upon
       completion, a new NET.CFG file will be created in your DOS
       directory.  Typically, this file contains the following lines:
       
           Link Driver LMODI
	       PORT  300
	       INT   5
	       FRAME Ethernet_802.3
	       #FRAME Ethernet_802.2
		   :
       
	   An ordinary startnet.bat for the ODI workstation performs the
	   following:
       
	   SET NWLANGUAGE=ENGLISH  --Set NetWare 4.X to English language
	   LSL                     --Link Support Layer Module provided by Nvl
           LMODI                 --Hardware Specific Module
	   IPXODI                  --IPX Protocol Stack Module provided by Nvl
	   VLM                     --DOS Support Module provided by Novell
	   F:                      --Change to connected device
	   LOGIN .ADMIN            --Login to file server as user ADMIN
       
       Run STARTNET to access the Novell network.

  Support Options
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
	We are consistently improving and upgrading our drivers. you are
	welcomed at any time to browse through our BBS, and download any
	drivers, utilities and help files.

        If you still cannot get the DME336T working properly, our
	technical experts are always ready to help.  Please be at your
        computer, have your DME336T, Drivers Disk, and the following
	information available:

	* Version number of CARDEN.EXE or any drivers you are
	  running
	* The extact text of any error message displayed on your screen
	* The type of computer
	* The type of network

	For technical support, you may contact your authorized D-Link 
	distributor, dealer, or the following D-Link headquarters:

        In U.S.A.           Tel: +1(949)455-1688      Fax: +1(949)455-2521
                            BBS: +1(949)455-1779      BBS: +1(949)455-9616

	In Canada           Tel: +1(905)828-0260      Fax: +1(905)828-5669
			    BBS: +1(905)828-6673

	In U.K. & Europe    Tel: +44(181)235-5555     Fax: +44(181)235-5500
			    BBS: +44(181)235-5511

	In Germany          Tel: +49(6196)643011      Fax: +49(6196)28049
			    BBS: +49(6196)28378

	In Asia, Taiwan     Tel: +886(2)916-1600      Fax: +886(2)914-6299
			    BBS: +886(2)910-1835

	In France           Tel: +33(1)30238688       Fax: +33(1)3028689

	In Australia        Tel: +61(2)4177100        Fax: +61(2)4171077
			    BBS: +61(2)4173711

	In Nordic           Tel: +46(40)163330        Fax: +46(40)163340
			    BBS: +46(40)163343

	In Singapore        Tel: +657746233           Fax: +657746322
			    BBS: +657744787

	In China            Tel: +86(10)4934175       Fax: +86(10)4991648

	In Tokyo            Tel: +81(3)57512351       Fax: +81(3)57512352

	In India            Tel: +91(22)6172478       Fax: +91(22)6172476

	The BBS communication setup information is as follows :
	     Speed:  2400-14400 baud                           - Germany
		     2400-9600 baud                            - Asia,Taiwan
		     14400-16800 baud                          - Canada
		     9600-14400 baud V32, V32bis, V42, V42bis  - U.S.A.
		     2400-19200 baud V24, V32, V32bis, V42bis  - U.K. & Europe
	     Parity: None
	     Data bits: 8
	     Stop bit : 1
       
  Copyrights, Trademarks, and Disclaimers
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
  All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are
  rights reserved by Microsoft Corporation
 
  All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights
  reserved by Novell Corporation
 
  Further rights reserved to their respective corporations
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.60