DME336T Ethernet/Fax/Modem May 1996
Manual Update Supplement
!!!!!!Note!!!!!!!
For a quick start simply run INSTALL.EXE on the root of this Driver disk.
!!!!!!!!!!!!!!!!!
This document contains information that supplements the "User's Manual"
and accompanying software. The User's Manual can be found in the root of the
driver disk as MANUAL.TXT.
Contents
ÄÄÄÄÄÄÄÄ
Introduction
PCMCIA Driver Installation
Getting Started
EMM386 Usage with DME336T
Driver Directory Structure
Support Options
Copyrights, Trademarks, and Disclaimers
Introduction
ÄÄÄÄÄÄÄÄÄÄÄÄ
Thank you for purchasing the DME336T Ethernet/Fax/Modem PC Card.
This diskette has network driver support for the DME336T
Ethernet/Fax/Modem PC Card. There is a format change for this driver
disk. All README's have been reformatted, an easy setup program,
and consistency on all documentation provided.
We hope our new readme's and installation will minimize the users
effort to make our products work. Should you have further
recommendations please contact the support manager.
Install PC Card Software Manually
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
The installation software has been carefully designed to detect
a combination of hardware and software installed on the PC. Proper
detection will allow the PC's PC Card drivers to enable the
DME336T. If the installation software fails to complete,
the enabler will need to be manually copied from the driver disk
to the PC. The follow the next few steps for instructions
If Windows for Workgroup 3.11, Windows NT, Windows 95, or Windows 98
are used, follow the instructions for installing PC Cards in the
PC's manual.
Determine if any third party generic enablers installed on the PC.
These are identified by a search through the CONFIG.SYS file for
the following lines:
Vendor Device Loaded in CONFIG.SYS
--------------- -------------------------------
Awards Software DEVICE=C:\CARDWARE\PCENABLE.EXE
System Soft DEVICE=C:\CARDSOFT\CARDID.EXE
Phoenix DEVICE=C:\PCMPLUS\PCMSCD.EXE
If one of these exist in your CONFIG.SYS, it can be used to enable
the DME336T Ethernet/Fax/Modem PC Card. Follow the PCMCIA driver
installation instructions in the PC's manual.
If the PC Card drivers do not support multi-function cards, please
use the included enabler.
Disable all current PC Card drivers by editing the CONFIG.SYS
and AUTOEXEC.BAT. If it is necessary to keep these drivers
for other adapters skip to next section.
Insert Driver Disk in drive A:.
Type C: at the command prompt.
Type MD DMECARD to make a new directory.
Type COPY A:\ENABLER\*.* C:\DMECARD to copy the enabler to
your directory.
Modify the PATH= statement in your AUTOEXEC.BAT to include
path C:\DMECARD.
Change From PATH=<Original Path>
To PATH=<Original Path>;C:\DMECARD
Use the CARDEN.EXE to enable DME336T when the PC is loading
Card Services.
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
For Novell, Lan Manager, and Packet Driver, first insert the
DME336T Ethernet/Fax/Modem PC Card into one of the free PCMCIA
card slots, remove all other PC Cards from your machine.
Then insert the "DME336T Drivers Disk" into drive A, and type
A:\INSTALL at the command prompt. The installation program
will copy files to the destination directory and modify your
related files(CONFIG.SYS, AUTOEXEC.BAT, and NET.CFG).
For Windows for Workgroup, Windows NT ,Windows 95 & Windows 98 use the
"Network Setup" utility provided by windows system to install
the DME336T. On this disk you will find sub-directories for each of
the Microsoft products. Each directory has a README.TXT that will
help install that particular Microsoft product.
After installation, simply reboot the machine to enable the DME336T.
EMM386 Usage with DME336T
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Under PCMCIA all I/O cards (including Ethernet and Modem) must
be initialized as memory cards and then switched into I/O mode
operation by an enabler software.
Therefore, the enabler software (such as CARDEN.EXE) must see the
PC Card memory when it is executed. DOS extended memory managers
such as EMM386 and QEMM take control of the PC memory space which
effects PC Card initialization.
There are two solutions available:
1) Run enabler (CARDEN or existing PC Card drivers + CARDEN)
before EMM386 or QEMM is loaded.
2) Exclude at least 4K of memory from EMM386's or QEMM's use.
An exclusion of X=D000-D3FF will work well.There may also
be additional exclusions for your PCMCIA drivers, don't
modify these.
Driver Directory Structure
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
The network drivers on this disk is organized in the following
structure. Each directory contains a README.TXT file which
provides you with detailed installation instructions for drivers
in that directory:
DME336T Diskette Release 05/01/96
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
CARDEN.EXE Direct PCMCIA Card Enabler for DOS, supports
DME336T and Intel compatible, Compaq and Databook
controllers.
LMODI.COM DME336T DOS/ODI Driver working with direct enabler(LAN
& MODEM run concurrently). Supports Intel compatible,
Compaq and Databook controllers.
LMNDIS.DOS DME336T DOS real mode NDIS Driver
LMPD.COM DME336T DOS real mode Packet Driver
LMNDIS.386 DME336T Enhance Mode NDIS Driver for Win for Workgroups
LMNDIS.SYS LanModem Enhance Mode NDIS Driver for Windows 95 & 98.
LMNDIS.SYS DME336T Enhance Mode NDIS Driver for Windows NT.
Support Options
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
We are consistently improving and upgrading our drivers. you are
welcomed at any time to browse through our BBS, and download any
drivers, utilities and help files.
If you still cannot get the DME336T working properly, our
technical experts are always ready to help. Please be at your
computer, have your DME336T, Drivers Disk, and the following
information available:
* Version number of CARDEN.EXE and any drivers you are running
* The extact text of any error message displayed on your screen
* The type of computer
* The type of network
For technical support, you may contact your authorized D-Link
distributor, dealer, or the following D-Link headquarters:
In U.S.A. Tel: +1(949)455-1688 Fax: +1(949)455-2521
BBS: +1(949)455-1779 BBS: +1(949)455-9616
In Canada Tel: +1(905)828-0260 Fax: +1(905)828-5669
BBS: +1(905)828-6673
In U.K. & Europe Tel: +44(181)235-5555 Fax: +44(181)235-5500
BBS: +44(181)235-5511
In Germany Tel: +49(6196)643011 Fax: +49(6196)28049
BBS: +49(6196)28378
In Asia, Taiwan Tel: +886(2)916-1600 Fax: +886(2)914-6299
BBS: +886(2)910-1835
In France Tel: +33(1)30238688 Fax: +33(1)3028689
In Australia Tel: +61(2)4177100 Fax: +61(2)4171077
BBS: +61(2)4173711
In Nordic Tel: +46(40)163330 Fax: +46(40)163340
BBS: +46(40)163343
In Singapore Tel: +657746233 Fax: +657746322
BBS: +657744787
In China Tel: +86(10)4934175 Fax: +86(10)4991648
In Tokyo Tel: +81(3)57512351 Fax: +81(3)57512352
In India Tel: +91(22)6172478 Fax: +91(22)6172476
The BBS communication setup information is as follows :
Speed: 2400-14400 baud - Germany
2400-9600 baud - Asia,Taiwan
14400-16800 baud - Canada
9600-14400 baud V32, V32bis, V42, V42bis - U.S.A.
2400-19200 baud V24, V32, V32bis, V42bis - U.K. & Europe
Parity: None
Data bits: 8
Stop bit : 1
Copyrights, Trademarks, and Disclaimers
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
All references to MS, Windows, Win95, Windows 95, Windows 98, Windows NT,
WinNT are rights reserved by Microsoft Corporation
All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are
rights reserved by Novell Corporation
Further rights reserved to their respective corporations
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.