09/19/2007,4.0.112.3223
- Support FMD1216MEX
07/19/2007,4.0.112.3222
- Tuning for Vista Media Center DVB-T Services Scan (Check the lock status of both Tuner and Demod)
10/23/2006,4.0.112.3221
- Add NTSC_M in TVTuner (MainConcept MCE Encode : http://www.mainconcept.com/site/index.php?id=17773 )
08/07/2006,4.0.112.3220
- Support LR6652 (DTV2000) PCB Revsion:I
- Set GPIO2 for all the LR6652 (DTV2000) PCB Revision (capmain.cpp)
- Remove the Setup initial rout (e4crossbarprop.cpp, e4dualprop.cpp)
03/24/2006,4.0.112.3219
- DTV2000 : Philips FMD1216ME NTSC mode tuning
03/23/2006,4.0.112.3218
- Support CX23883 PCI Audio Device ID 8801h ~wfcxacap.inf
- Remove BDA Tuner Model Name (Philips FMD1216ME, Thomson DTT7579) ~wfcxdtun.inf
01/26/2006,4.0.112.3218
- Add PAL-60 and NTSC-433 (525 lines, 60Hz)
- Remove all the UnSupported cards from INF files
01/09/2006,4.0.112.3217
- Set the 4-pin analog audio output level to 0 dB in wfcxvcap.inf
01/06/2006,4.0.112.3216
- GPF when Video Source Switching is fixed
01/04/2006,4.0.112.3215
- Some continuous 'Bo', 'Bo' noise issues are fixed
12/21/2005,4.0.112.3214
- Add new Leadtek TV Audio APIs for WinFast DTV and WinFast PVR
12/16/2005,4.0.112.3213
- GDI Teletext application compatibility issue fixed
12/07/2005,4.0.112.3212:
- AudioStandrad auto-switching when VideoStandrad is set
- FM Range : 40.00~110.00 MHz
- TV Range : 40.00~999.00 MHz
12/06/2005,4.0.112.3211:
- Recall
11/25/2005,4.0.112.3210:
- MCE2005 Tuning (SettleTime, SignalStrength, SignalQuality) for in-door antenna
- LR6652 MCE2005 Workaround
- Remove timestamp from the PCI Audio stream (wfcxacap.sys)
11/21/2005,4.0.112.3209:
- LR6650 MCE2005 Tuning
11/18/2005,4.0.112.3208:
- Support all PAL/SECAM Video Standards in tuner driver's capability.
11/14/2005,4.0.112.3207:
- GPIOPinSet definition (LR6652_GPIOPinSet4.reg and LR6652_GPIOPinSet6.reg)
"GPIOPinSet"=4 :
RF-In1 Digital mode (Air Antenna)
RF-In2 Analog mode (Cable)
"GPIOPinSet"=5 :
RF-In1 Analog mode (Cable)
RF-In2 Digital mode (Air Antenna)
"GPIOPinSet"=6:
RF-In1 Digital/Analog mode (Air Antenna)
RF-In2 Unused
"GPIOPinSet"=7 :
RF-In1 Unused
RF-In2 Digital/Analog mode (Air Antenna)
11/04/2005,4.0.112.3206:
- Change the LR6652 GPIO15 definition (William's request)
- LR6652_GPIOPinSet4.reg and LR6652_GPIOPinSet5.reg (William's request)
11/03/2005,4.0.112.3205:
- Support "HandleFrequencyOffsetForMCE" on-the-fly
07/29/2005,4.0.112.3204:
- Change the LR6652's device name to "DTV2000 H"
- Change the LR6650's device name to "DTV1000 T"
07/21/2005,4.0.112.3203:
- Improve the reliability of IBDA_SignalStatistics::get_SignalQuality()
07/13/2005,4.0.112.3202:
- Support LR6650 PCB:A (Device Name : LR6650)
- Support LR6650 PCB:C or later (Device Name : WinFast DTV1000T)
- Support LR6652 PCB:B or later (Device Name : WinFast DTV2000)
07/08/2005,4.0.112.3201:
- First Release
07/07/2005,4.0.112.3200:
- Beta Release
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.