1. Q_Master.zip Driver
2. Release Note.txt File Contents

Release Note.txt Driver File Contents (Q_Master.zip)

QS050929:
1. Fixed problem in Drive Detection.
2. Added support for 2-port mode configuration.

QS050323:
1. Fixed problem with 'Home' (Cancel) key in RAID Config Utility.
2. Changed "Healthy" & "Fail" to "On-Line" & "Off-Line" in RAID Config Util.

QS050321:
1. Added string "ATAPI (N/S)" for ATAPI Device
2. Changed "Failed" and "Healthy" to "Off-Line" and "On-Line"
3. Provided correct CF when return from Int13 calls
4. Added BP_ProcRaidRead/Write for common use with EDDS routines

QS050311:
1. Suppressed ATAPI device enumeration. 

QS050228:
1. Fixed Soft-Reset problem with SuperMicro P4SCI MoBo. 

QS050222:
1. Suppressed SET_MAX command out
2. Changed RAID_DEVICE_FLAGS_BAD definition
3. Preserved CX register in RUNTM_InitSATA

QS050214:
1. Fixed Disk & Volume size calculation differences.
2. Fixed RAID READY command to return fail if ANY of the member drives failed.

QS050131:
1. Changed PCI ID display.
2. Fixed to display both of 'Incomplete' and 'Needs Repair' correctly.
3. Added VERIFY, SEEK and TEST_READY functions for RAID runtime API (Int 13h)


QS050124:
1. Fixed the problem in RAID-10 runtime writing.

QS050114:
1. Fixed the problem with cross-chip RAID volume.
2. Improved Drive Detection (Added Global Resetting).

QS050112:
1. Deleted old-style RAID Configuration Utility.
2. Fixed stripe size and EndLBA value when creating RAID-0 and RAID-10.
3. Added "Needs Repair" volume status display in POST message and in GUI.

QS050107:
1. Fixed problem on deleting off-line marked RAID drives. 
2. Fixed problem on identifying the VMR flags on swapped drives. 
3. Corrected string “Property” to “Properties”. 
4. Added double quotation marks surrounding Volume ID on found RAID volume in POST message