Intel(R) I/O Acceleration Technology Software Guide for Linux* ============================================================= January 27, 2006 Contents ======== - Overview - Integration and Configuration - Enabling and Disabling Intel I/OAT - Intel I/OAT sysfs Interface - Support - License Overview ======== This document contains instructions on how to integrate and configure the ioatdma engine for Linux. For additional information on Intel(R) I/O Acceleration Technology (Intel(R) I/OAT), see the following web page: http://www.intel.com/technology/ioacceleration/index.htm. These instructions are intended for the following platform configuration: - Mainboard chipset: Intel(R) 5000 Series Chipsets Integrated Device - 1A38 - Linux OS: the supported kernel version number is embedded in the patch file name (e.g., cb-2.6.xx.diff, where "2.6.xx" is the supported kernel version). - Drivers: - e1000 LAN driver, version 7.0.xx - ioatdma driver (in this tarball) Integration and Configuration ============================= 1) Start with an unaltered kernel source tree. - Make sure it compiles and boots. - Verify that lspci shows the Intel I/OAT compatible adapter. (bus 0, device 8, unknown device 1a38). If the Intel I/OAT capable adapter does not appear, make sure it is enabled in the BIOS menu: -> Device Manager -> Blackford Configuration -> Crystal Beach/DMA Configuration 2) Extract all files from this ioatdma tarball to a new directory in the kernel tree, named drivers/dma. 3) Move drivers/dma/dmaengine.h to include/linux. 4) Apply drivers/dma/cb-{kernel version}.diff using patch. Example: patch -p1 < drivers/dma/cb-2.6.xx.patch 5) Verify that the kernel has CONFIG_PCI_MSI enabled. 6) Enable the DMA Subsystem. Do this from the menuconfig menu. Select: Device Driver > DMA Engine Support In the DMA Engine screen, select/enable all of the following: - Support for DMA Engines - Network: TCP receive copy offload - Test DMA Client - Intel I/OAT DMA support 7) Compile the kernel and reboot. If compiled as a module, the DMA engine driver will be named ioatdma.ko. Enabling and Disabling Intel I/OAT ================================== The Intel I/OAT network accelerations are enabled by loading the Intel I/OAT DMA engine driver at runtime. The driver module filename is ioatdma.ko. To enable Intel I/OAT, load the ioatdma driver module: modprobe ioatdma Removing the ioatdma module once it has been loaded is not recommended. However, if the "Forced module unloading" option is enabled in the kernel, the module may be unloaded with: rmmod -f ioatdma WARNING: This command above may hang the system. Intel I/OAT sysfs Interface =========================== When the Intel I/OAT driver is properly loaded, there will be directories created in sysfs, under /sys/class/dma, named dma0chanX, where X is 0-3. Channel Entries: in_use ------ 1 if the DMA channel is allocated to a client, such as the network stack. bytes_transferred ----------------- The total number of bytes transferred by either the DMA engine or CPU copy. memcpy_count ------------ The total number of copy operations initiated. Support ======= For general information, go to the Intel support website at: http://support.intel.com If an issue is identified with the released source code on the supported kernel with a supported adapter, email the specific information related to the issue to linux.nics@intel.com. License ======= This software program is released under the terms of a license agreement between you ('Licensee') and Intel. Do not use or load this software or any associated materials (collectively, the 'Software') until you have carefully read the full terms and conditions of the LICENSE located in this software package. By loading or using the Software, you agree to the terms of this Agreement. If you do not agree with the terms of this Agreement, do not install or use the Software. * Other names and brands may be claimed as the property of others.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.