1. 38_51x_20-2_1240.zip Driver
2. Release Notes.txt File Contents

Release Notes.txt Driver File Contents (38_51x_20-2_1240.zip)

Firmware version : 62.51.1-007
Changes from 62.51.1-006
1)	To resolve issue with XTen Soft VOIP Phone where it unable to register. It only able to register with fix DNS on PC
2) Enables SPI Firewall; 
3) Disables Access Control which prevents remote telnet via WAN access; 
4) Disables Remote Ping to WAN IP (if enabled); 
5) On the 'Quick Start' page after entering username and password then selecting the 'Connect' button you receive the message "Try to connect to Internet". Please change this to "Trying to connect to the Internet". 
6) On the 'Basic' -> 'Home' page if you select 'Disconnect' then 'Connect' the button changes and reports "Try to connect". Please change this to "Trying to connect."
7)PPP Settings > Username: change from 'guest@netcomm...' to 'username'. 

==========================================================================================
Firmware version: 62.51.1-006
Date: 21 Sep 2005 
Customer: Netcomm

Changes from 62.51.1-005

1. Fixed the isp/isp login problem
====================================================================

Firmware version: 62.51.1-005
Date: 16 Aug 2005 
Customer: Netcomm

Changes from 62.51.1-004

1. Included WAN Static IP address over PPP feature
2. To have the ability to save the gateway of the Static connection without the need to detect ADSL link.



===============================================================

Firmware version: 62.51.1-004
Date: 20 July 2005 
Customer: Netcomm

Changes from 62.51.1-003

1.Fixed the CLI issues and added new command: set_connection_firewall <connectionID> <value>
2. Model number set using rcS file ( no need to run setenv file to get the modem status)
3. Firmware version displayed like 62.51.1-004
================================================================
Firmware version: 62.51.1-003
Date: 23 June 2005 
Customer: Netcomm

Changes from 62.51.1-002

1. CLI implemented.
2. CLIP feature removed
3. Access control page enabled,WAN access Enabled. Allow incoming ping enabled
4. Web authentication enabled
		     Username: admin
			 Password: admin
5. SNMP:    Location: [Blank]
			Contact:  [Blank]
6. SNTP - default Time Zone is GMT +10:00 Brisbane, Sydney
7. Model number changed to NB5 ADSL2+
8. Quickstart Username : guest@netcommsetup.com.au
			   Password: netcommsetup
	           Firewall: Disabled		   
==================================================================			 

Firmware version: 62.51.1-002
Date: 3 June 2005 
Customer: Netcomm

Developed based on 62.2.1-005.

Changes from 62.2.1-005


1. Changed the <pppd_conndelay>60</pppd_conndelay> to <pppd_conndelay>10</pppd_conndelay>
   in config.xml and system.xml 

2. copied protocol_type1.js from 62.2.1-006

3. DHCP range 192.168.1.100-192.168.1.149

4. Default PVC 8/35

5. SNMP name : NB5 

6. Lan configuration:  Host name and domanin name  are set to Blank