1. 3c319x.exe Driver
  2. OEMSETUP.INF File Contents

OEMSETUP.INF Driver File Contents (3c319x.exe)

;=============================================================================
; 3Com 3C319 TokenLink Velocity ISA Card Adapter
; ISA OEM Network Setup Information file for Microsoft Windows NT Version 
;3.51
; (C) Copyright 1995 3Com Corporation
; %VER 3Com TokenLink Velocity ISA Card Windows NT 3.51 ISA OEMSETUP.INF v1.0a
;=============================================================================

[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    ISA
    EISA
	"Jazz-Internal Bus"
[Options]
    TLNKVISA
[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
retaddr   = ""
KeyNull         = ""
StringNull      = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
Result = ""
TimeOut = 0
PriorityError = "ERROR"
PriorityEvent = "PriorityEvent" 
SignalSet = "EventSet"
Null = ""
Exitcode        = 0
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
INF_PROCESSOR = "I386"

[FileConstants]
UtilityInf      = "UTILITY.INF"
ParamInf        = "NCPARAM.INF"
subroutineinf   = "SUBROUTN.INF"
DialogDLL       = "TLNK.DLL"
SoftwareType    = "driver"
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
;ControlExe     = "%SystemRoot%\System32\control.exe"
TlnkvEISA_COMPRESSID = 3239248          
Manufacturer    = "3Com"
ProductMajorVersion     = "3"
ProductMinorVersion     = "51"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName     = "Tlnkv"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\tlnkv.sys"
NetRuleSoftwareType     = "TLNKVSys ndisDriver TLNKVDriver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """TLNKVSys"" yes no container"
NetRuleSoftwareClass    = {"TLNKVDriver basic"}
NetRuleSoftwareBindable = {"TLNKVDriver TLNKVAdapter non exclusive 100"}
ProductHardwareName     = "TLNKV"
NetRuleHardwareType     = "TLNKV TLNKVAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"TLNKVAdapter basic"}
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
3CNUMBER = "TLNKV"
GROUP_NAME = "3Com TokenRing Velocity ISA Adapter"
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
	ifstr(i) $($1) == ""
	   goto returnoptions
	endif
	set PlatformList = ^(PlatformsSupported, 1)
	Ifcontains(i) $($1) in $(PlatformList)
	   goto returnoptions
	else
	   set Status = STATUS_NOTSUPPORTED
	   goto finish_ReturnOptions
	endif
    else
	set Status = STATUS_NOLANGUAGE
	goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Status   = STATUS_FAILED
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
	Return STATUS_NOLANGUAGE
    endif
    Debug-Output "OEMNAD3T.INF: STF_CWDIR is: "$(!STF_CWDIR)
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    read-syms FileConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
	set Continue = $(OK)
	set Priority = $(Priority)
    endif
    Debug-Output "OEMNAD3T.INF: Priority is: "$(Priority)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Debug-Output "OEMNAD3T.INF: Begin - In"
    set ActivateDetection = FALSE
    Ifstr(i) $(!NTN_InstallMode) == deinstall
	set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == bind
	set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
	set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == configure
	set StartLabel = configureadapter
	;set CommonStatus = STATUS_REBOOT
	;set ActivateDetection = TRUE
	Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	    Debug-Output "OEMNAD3T.INF: Cannot configure the 3Com software."
	    Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMNAD3T.INF: ShellCode error: cannot get an error string."
		goto ShellCodeError
	    endif
	    set Error = $($R0)
	    set from = end
	    set to = end
	    goto nonfatalinfo
	endif
    else
	set StartLabel = installadapter
	set OEM_ABANDON_OPTIONS = {}
	set OEM_ABANDON_SOFTWARE = FALSE
	set OEM_ABANDON_ON = TRUE
	;set ActivateDetection = TRUE
    endif
    set AutoRingSpeedValue = 1
    set IoBaseAddrValue = 1
    set Priority = $(Priority)
    set NodeAddressValue = ""
    set BusTypeValue = 1
    set BusNumberValue = 0

    Debug-Output "OEMNAD3T.INF: =================================================="
    Debug-Output "OEMNAD3T.INF: STF_CWDIR is: "$(!STF_CWDIR)
    Debug-Output "OEMNAD3T.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
    Debug-Output "OEMNAD3T.INF: Option is: "$(Option)
    Debug-Output "OEMNAD3T.INF: !STF_NCDETECT  is: "$(!STF_NCDETECT)
    Debug-Output "OEMNAD3T.INF: !STF_NCOPTION  is: "$(!STF_NCOPTION)
    Debug-Output "OEMNAD3T.INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD)
    Debug-Output "OEMNAD3T.INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO)
    Debug-Output "OEMNAD3T.INF: Priority is: "$(Priority)
    Debug-Output "OEMNAD3T.INF: =================================================="
;    Set DetectedCard = FALSE
;    Ifstr(i) $(ActivateDetection) != TRUE
;       Goto skipdetection
;    Endif
;    Set TypeList = {{IOADDR, IOADDR_Addr_List, IoBase}}
;    Debug-Output "OEMNAD3T.INF: Calling Param_BuildTypeLists"
;    Shell $(ParamInf) Param_BuildTypeLists $(Option) $(TypeList)
;    Set Status = $($R0)
;    ifstr(i) $(Status) != STATUS_SUCCESSFUL
;       Goto fataldetect
;    Endif
    Debug-Output "OEMNAD3T.INF: Calling Param_SetDefaults"
    Shell $(ParamInf) Param_SetDefaults {}
;    Ifstr(i) $(!STF_NCDETECT) == YES
;       Ifstr(i) $(!STF_NCOPTION) == $(Option)
;          Set DetectedCard = TRUE
;          Debug-Output "OEMNAD3T.INF: Setting DetectedCard to TRUE"
;       Endif
;    Endif
;skipdetection =+
set from = $(fatal)
set to = $(fatal)
Goto $(StartLabel)
installadapter = +
    Debug-Output "OEMNAD3T.INF: Entering Installadapter"
    set AdapterList = $($R0)
    set NewAdapterList = {}
    set NumNew = 0

    ForListDo $(AdapterList)
	set BusNumber = *($($),1)
    EndForListDo

    set AdapterList = $(NewAdapterList)

    ifint $(NumNew) == 0
	set AdapterList = {{0,0,0}}
    endif
    Debug-Output $(AdapterList)
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	CloseRegKey $(KeyProduct)
	ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
	   Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
	       $(ProductVersion)
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Debug-Output "OEMNAD3T.INF: ShellCode error: cannot get an error string."
	       goto ShellCodeError
	   endif
	   goto end
	else
	   Shell $(UtilityInf), CardExistedDlg
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Debug-Output "OEMNAD3T.INF: ShellCode error: cannot get an error string."
	       goto ShellCodeError
	   endif
	   ifstr(i) $($R1) != "OK"
	       goto end
	   endif
	   set OldVersionExisted = $(TRUE)
	endif
    endif
    ifint $(OldVersionExisted) == $(FALSE)
	ifstr(i) $(!NTN_InstallMode) == "install"
	   Ifstr(i) $(DoCopy) == "YES"
		Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
		Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		    Goto ShellCodeError
		Else-Ifstr(i) $($R0) == STATUS_FAILED
		    Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
		    ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		    endif
		    set Error = $($R0)
		    Goto fatal
		Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
		    Goto successful
		Endif
		Set SrcDir = $($R1)
	    endif
	endif
    endif

    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES

    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Goto ShellCodeError
    Else-Ifstr(i) $($R0) == STATUS_FAILED
	Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
	Goto fatal
    Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
	Goto successful
    Endif
    Set SrcDir = $($R1)
    Debug-Output "OEMNAD3T.INF: SrcDir is:"$($R1)
    install "Install-Dll"
;   goto adaptersetup
    ui pop 1
    goto adapterverify

;    Ifstr(i) $(DetectedCard) != TRUE
;       Goto adaptersetup
;    Endif
;    StartWait
;    Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
;    EndWait
;    Ifstr(i) $($R0) != STATUS_SUCCESSFUL
;        Debug-Output "OEMNAD3T.INF: SrcDir is:"$($R1)
;        Set SrcDir = $($R1)
;        Debug-Output "OEMNAD3T.INF: SrcDir is:"$($R1)
;        install "Install-Dll"
;       Goto adaptersetup
;   Endif
;    Set DetectedParams = $($R1)
;    Debug-Output "OEMNAD3T.INF: Calling Param_SetDefaults to merge detected params"
;    Shell $(ParamInf) Param_SetDefaults $(DetectedParams)
;    goto adapteroptions
configureadapter = +
    Debug-Output "OEMNAD3T.INF: Entering Configureadapter"
    Ifstr $(KeyProduct) == $(KeyNull)
	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
	Ifstr $(KeyProduct) == $(KeyNull)
	    set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	    Debug-Output "OEMNAD3T.INF: Cannot find component product key"
	    goto fatalregistry
	Endif
    Endif
    Debug-Output "OEMNAD3T.INF: Shelling to FindService"
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "OEMNAD3T.INF: FindService shell failure"
	Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
	Debug-Output "OEMNAD3T.INF: FindService Shell error: "$($R0)
	Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
	set RegistryErrorIndex = "CANNOT_FIND_COMPONENT_SERVICE"
	Debug-Output "OEMNAD3T.INF: Cannot find component service"
	goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE )
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
	set ValueItem = $($)
	set ValueName = *($(ValueItem),1)
	set ValueData = *($(ValueItem),4)
	ifstr(i) $(ValueName) == "AutoRingSpeed"
	    set AutoRingSpeedValue = $(ValueData)
	else-ifstr(i) $(ValueName) == "IOBase"
	    set IOBaseAddrValue = $(ValueData)
	else-ifstr(i) $(ValueName) == "NETWORKADDRESS"
	    set NodeAddressValue = $(ValueData)
	else-ifstr(i) $(ValueName) == "BusType"
	    set BusTypeValue = $(ValueData)
	else-ifstr(i) $(ValueName) == "BusNumber"
	    set BusNumberValue = $(ValueData)
	endif
    EndForListDo
    ifstr(i) $(AutoRingSpeedValue) == "0"
	Set CheckItemsIn = {"OFF"}
    Else
	Set CheckItemsIn = {"ON"}
    Endif
    Debug-Output "OEMNAD3T.INF: AutoRingSpeed is "$(AutoRingSpeedValue)
    set IOBaseAddrValue = *($(IOBaseAddrList), 1)
    ifstr(i) $(IOBaseAddrValue) == ""
	set IOBaseAddrValue = *($(IOBaseAddrList), 1)
    endif
    Debug-Output " OEMNAD3T: Bus Type is "$(BusTypeValue)
    Debug-Output " OEMNAD3T: Bus Number is "$(BusNumberValue)
    Debug-Output " OEMNAD3T: I/o base is "$(IOBaseAddrValue)
    Debug-Output "OEMNAD3T.INF: Node Address is "$(NodeAddressValue)

adaptersetup =+
    Debug-Output "OEMNAD3T.INF: Entering adaptersetup"

    set Result = $(SignalSet)
    Set from = adapteroptions
adapteroptions = +
    Debug-Output "OEMNAD3T.INF: Entering adapteroptions"
    Debug-Output "OEMNAD3T.INF: Loading Dialog dll"

    LoadLibrary $(Media) $(DialogDLL) hLib

    Debug-Output "OEMNAD3T.INF: Dialog name:"$(DialogDLL)
    Debug-Output "OEMNAD3T.INF: Load Dialog dll finished"

    Debug-Output "OEMNAD3T.INF: AutoRingSpeed is "$(AutoRingSpeedValue)
    
    read-syms FileDependentDlg$(!STF_LANGUAGE)
    set Label = $(EditLabel)
    set Value = *($(EditTextIn),1)
    Debug-Output "OEMNAD3T.INF: Pre ui, Value for .$(Label). = .$(Value)."
    Debug-Output "OEMNAD3T.INF: Begin UI"

    ui start "InputDlg" $(hLib)
    set ExitButton      = $(ButtonPressed)
    Debug-Output " OEMNAD3T.INF:ButtonPressed "$(ButtonPressed)
    Debug-Output $(DLGEVENT)

    Debug-Output " Calling WaitOnEvent"
    WaitOnEvent $(Result) $(PriorityEvent) $(TimeOut)
    Debug-Output " Calling FreeLibrary"
    FreeLibrary $(hLib)
    ifstr(i) $(DLGEVENT) == "CONTINUE"
	Debug-Output "OEMNAD3T.INF: CONTINUE"
	;set IOBaseAddrValue = $(Combo1Out)
	set ExitButton = $(ButtonPressed)

	Set Chk = *($(CheckItemsOut), 1)
	Ifstr(i) $(Chk) == "ON"
	    Set AutoRingSpeedValue = 1
	Else
	    Set AutoRingSpeedValue = 0
	Endif
	set Label = $(EditLabel)
	set Value = *($(EditTextOut),1)
	Debug-Output "OEMNAD3T.INF: Post ui, Value for .$(Label). = .$(Value)."
	set NodeAddressValue  = $(Value)

	Debug-Output "OEMNAD3T.INF: AutoRingSpeedValue ="$(AutoRingSpeedValue)
	ui pop 1
    else-ifstr(i) $(DLGEVENT) == "BACK"
	Debug-Output "OEMNAD3T.INF: BACK"
	;set CommonStatus = STATUS_USERCANCEL
	;Debug-Output "Action: exit. Bye."
	;ui pop 1
	;goto end

	set Result = $(Null)

	Debug-Output "OEMNAD3T.INF: Priority Button Pressed!!"
	;RunProgram Exitcode "" "" $(!STF_WINDOWSSYSPATH)"\control.exe" "pacecfg.cpl"
	;RunProgram Exitcode "" "" $(!STF_WINDOWSSYSPATH)\control.exe "pacecfg.cpl"
	StartDetachedProcess Exitcode "" "" $(!STF_WINDOWSSYSPATH)\control.exe "pacecfg.cpl"
	set Result = $(SignalSet)
	SignalEvent $(Result) $(PriorityEvent)

	ifstr(i) $(Exitcode) == $(PriorityError)
	     Debug-Output "OEMNAD3T.INF: Exit Code = "$(Exitcode)
	     Debug-Output " Called SignalEvent"
	     Debug-Output "Action: Exit. Bye."
	     ui pop 1
	     goto end
	else
	     Debug-Output "OEMNAD3T.INF: Exit Code = "$(Exitcode)
	     Debug-Output " Called SignalEvent"
	     ui pop 1
	     Debug-Output "Action: Go Back To Adapter Setup."
	     goto adaptersetup
	     ;goto end
	endif
    else-ifstr(i) $(DLGEVENT) == "EXIT"
	set CommonStatus = STATUS_USERCANCEL
	Debug-Output "Action: exit. "
	ui pop 1
	goto end
    else
	ui pop 1
	Debug-Output "Action: unknown. Bye."
	goto end
    endif
adapterverify =+
    Debug-Output "OEMNAD3T.INF: Entering adapterverify"

    Ifstr(i) $(DetectedCard) != TRUE
	Goto skipoptions
    Endif
    Debug-Output "OEMNAD3T.INF: Calling Param_VerifyCard"
    Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
    Ifstr(i) $($R0) == STATUS_SUCCESSFUL
	Debug-Output "OEMNAD3T.INF: Param_VerifyCard succeeded"
	Goto skipoptions
    Endif
    Set from = adapteroptions
    Set to = skipoptions
    Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error: cannot get an error string."
	goto ShellCodeError
    endif
    set Error = $($R0)
    Goto Warning
skipoptions =+
    Debug-Output "OEMNAD3T.INF: Entering skipoptions"

    ifint $(OldVersionExisted) == $(TRUE)
	Debug-Output "OEMNAD3T: OlderVersionExisted - TRUE"
	ifstr(i) $(!NTN_InstallMode) == configure
	    ;Shell $(UtilityInf), GetBusTypeNum
	    ;set BusTypeValue = $($R1)
	    set BusTypeValue = 1
	    set BusNumberValue = 0 

	    Debug-Output " OEMNAD3T: Bus Type is "$(BusTypeValue)
	    Debug-Output " OEMNAD3T: Bus Number is "$(BusNumberValue)

	    ;ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    ;    Debug-Output "OEMNAD3T: ShellCode error."
	    ;    goto ShellCodeError
	    ;endif
	    Debug-Output "OEMNAD3T: Before write registry"
	    set IOBaseAddrValue = *($(IOBaseAddrList), 1)
	    Debug-Output " OEMNAD3T: I/o base is "$(IOBaseAddrValue)

	    set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeValue)},+
				{NETWORKADDRESS,$(NoTitle),$(!REG_VT_SZ),$(NodeAddressValue)},+
				{AutoRingSpeed, $(NoTitle),$(!REG_VT_DWORD),$(AutoRingSpeedValue)},+
				{IoBase,$(NoTitle),$(!REG_VT_DWORD),1},+
				{BusNumber,  $(NoTitle),$(!REG_VT_DWORD),$(BusNumberValue)}}

	    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
	    
	    CloseRegKey $(KeyParameters)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMNAD3T: ShellCode error."
		goto ShellCodeError
	    endif
	    set RegistryErrorIndex = $($R0)
	    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		Debug-Output "OEMNAD3T: Registry error: Add value list"
		goto fatalregistry
	    endif
	    EndWait
	    goto successful
	endif
    endif
    StartWait
    ifint $(OldVersionExisted) == $(FALSE)
	Debug-Output "OEMNAD3T: OlderVersionExisted - FALSE"
	ifstr(i) $(!NTN_InstallMode) == "install"
	    Ifstr(i) $(DoCopy) == "YES"
		Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
		Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		    Goto ShellCodeError
		Else-Ifstr(i) $($R0) == STATUS_FAILED
		    Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
		    ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		    endif
		    set Error = $($R0)
		    Goto fatal
		Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
		    Goto successful
		Endif
		Set SrcDir = $($R1)
	    Endif
	    install "Install-Option"
	    ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
		Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
		    goto ShellCodeError
		endif
		set Error = $($R0)
		goto fatal
	    endif
	endif
	Debug-Output "OEMNAD3T: ProductSoftwareName: "$(ProductSoftwareName)
	Debug-Output "OEMNAD3T: ProductSoftwareTitle: "$(ProductSoftwareTitle)
	Debug-Output "OEMNAD3T: !STF_CONTEXTINFNAME is: "$(!STF_CONTEXTINFNAME)
	Debug-Output "OEMNAD3T: ProductSoftwareImagePath: "$(ProductSoftwareImagePath)
	Debug-Output "OEMNAD3T: NetEventDLL: "$(NetEventDLL)
	Debug-Output "OEMNAD3T: Manufacturer: "$(Manufacturer)

	Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
	    $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
	    $(NetEventDLL)
	Set OEM_ABANDON_SOFTWARE = TRUE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "OEMNAD3T: ShellCode error"
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	set KeyProduct      = $($R1)
	Set SoftNetRulesKey = $($R2)
	CloseRegKey $($R3)
	CloseRegKey $($R4)
	CloseRegKey $($R5)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    EndWait
	    Debug-Output "OEMNAD3T: Registry error: add software components"
	    CloseRegKey $(KeyProduct)
	    CloseRegKey $(SoftNetRulesKey)
	    goto fatalregistry
	endif
	set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
	       {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
	       {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
	       {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
	       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
	       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
	       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
	Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "OEMNAD3T: ShellCode error."
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    EndWait
	    Debug-Output "OEMNAD3T: Registry error: add value list."
	    CloseRegKey $(KeyProduct)
	    CloseRegKey $(SoftNetRulesKey)
	    goto fatalregistry
	endif
	set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
		    {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
		    {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
		    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
		    {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
		    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
	Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "OEMNAD3T: ShellCode error."
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	CloseRegKey $(KeyProduct)
	CloseRegKey $(SoftNetRulesKey)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    EndWait
	    Debug-Output "OEMNAD3T: Registry error: add value list."
	    goto fatalregistry
	endif
    endif
    Debug-Output "OEMNAD3T: AdapterList "$(AdapterList)

    ForListDo $(AdapterList)
	set BusNumber = *($($),1)
	Debug-Output "OEMNAD3T: For Loop Count"
	Debug-Output "OEMNAD3T: ProductHardwareName="$(ProductHardwareName)
	Debug-Output "OEMNAD3T: ProductKeyName="$(ProductKeyName)
	Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
	Debug-Output "OEMNAD3T: KeyAdapterRules="$($R2)
	Debug-Output "OEMNAD3T: KeyParameters="$($R3)
	Debug-Output "OEMNAD3T: Adapter Number="$($R4)
	ifint $($R4) != -1
	    Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
	endif
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "OEMNAD3T: Cannot add hardware component"
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    EndWait
	    Debug-Output "OEMNAD3T: Registry error: add hardware component"
	    CloseRegKey $($R1)
	    CloseRegKey $($R2)
	    CloseRegKey $($R3)
	    goto fatalregistry
	endif
	set KeyParameters = $($R3)
	set KeyAdapterRules = $($R2)
	set AdapterNumber = $($R4)

	set HardwareDescription = $(AdapterName)
	set HardwareTitle = $(AdapterName)
	set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
		   {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(HardwareTitle)},+
		   {Description,$(NoTitle),$(!REG_VT_SZ),$(HardwareDescription)},+
		   {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
		   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
		   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
	Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "OEMNAD3T: ShellCode error"
	    goto ShellCodeError
	endif
	CloseRegKey $($R1)
	set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
	set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
	set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
		{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
		{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
		{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
	Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "OEMNAD3T: ShellCode error."
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    EndWait
	    Debug-Output "OEMNAD3T: Registry error: add value list."
	    CloseRegKey $(KeyParameters)
	    CloseRegKey $(KeyAdapterRules)
	    goto fatalregistry
	endif
	CloseRegKey $(KeyAdapterRules)
	goto writeparameters
writeparameters = +
	Debug-Output "OEMNAD3T: WriteParameters: IN"

	;Shell $(UtilityInf), GetBusTypeNum
	;set BusTypeValue = $($R1)
	set BusTypeValue = 1
	set BusNumberValue = 0 

	Debug-Output " OEMNAD3T: Bus Type is "$(BusTypeValue)
	Debug-Output " OEMNAD3T: Bus Number Value is "$(BusNumberValue)

	;ifint $($ShellCode) != $(!SHELL_CODE_OK)
	;    Debug-Output "OEMNAD3T: ShellCode error."
	 ;   goto ShellCodeError
	;endif
	Debug-Output "OEMNAD3T: Before write registry"
	set IOBaseAddrValue = *($(IOBaseAddrList), 1)
	Debug-Output " OEMNAD3T: I/o base is "$(IOBaseAddrValue)

	set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeValue)},+
			    {NETWORKADDRESS,$(NoTitle),$(!REG_VT_SZ),$(NodeAddressValue)},+
			    {AutoRingSpeed, $(NoTitle),$(!REG_VT_DWORD),$(AutoRingSpeedValue)},+
			    {IoBase,$(NoTitle),$(!REG_VT_DWORD),1},+
			    {BusNumber,  $(NoTitle),$(!REG_VT_DWORD),$(BusNumberValue)}}
	Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
	CloseRegKey $(KeyParameters)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "OEMNAD3T: ShellCode error."
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    Debug-Output "OEMNAD3T: Registry error: Add value list"
	    goto fatalregistry
	endif

    EndForListDo
    EndWait
    Debug-Output "OEMNAD3T: WriteParameters: Out"
    goto paceentries
Finishwriteparameters = +
    Debug-Output "OEMNAD3T: FinishWriteParameters: Out"
    goto successful

bindingadapter =+
    Debug-Output "OEMNAD3T.INF: BindingAdapter: IN"

    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Debug-Output "OEMNAD3T.INF: RemoveAdapter: IN"

    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "OEMNAD3T.INF: ShellCode error"
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    else
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $(!NTN_RegBase)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "OEMNAD3T.INF: ShellCode error"
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif
	Ifstr(i) $(!STF_PLATFORM) == $(INF_PROCESSOR)
	RunProgram ExitCode "Windows Directory" "" UNTLNKV.EXE "-inf"
	endif
    goto end
UpgradeSoftware = +
    Debug-Output "OEMNAD3T.INF: UpgradeSoftware: IN"

UpgradeSoftware = +
    LoadLibrary "x" $(!STF_CWDDIR)\ncpa.cpl NCPA_HANDLE
    OpenRegKey $(!REG_H_LOCAL) "" "Software\Microsoft\TLNKV" $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	DeleteRegTree $(KeyProduct) ""
	LibraryProcedure NCPA_RESULT $(NCPA_HANDLE), CPlSetup $(!STF_HWND), DELETESVC, "TLNKV"
	set NetworkCardKeyName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards"
	OpenRegKey $(!REG_H_LOCAL) "" $(NetworkCardKeyName) $(MAXIMUM_ALLOWED) IE_KeyNetcards
	ifstr(i) $(IE_KeyNetcards) != ""    
	    EnumRegKey $(IE_KeyNetcards) IE_KeyNameList
	    ForListDo $(IE_KeyNameList)
		OpenRegKey $(IE_KeyNetcards) "" *($($),1) +
		    $(MAXIMUM_ALLOWED) NetworkCardKey
		Ifstr(i) $(NetworkCardKey) != $(KeyNull)
		    GetRegValue $(NetworkCardKey),"ProductName", ProductNameInfo
		    set ProductName = *($(ProductNameInfo), 4)
		    Debug-Output "   ProductName = "$(ProductName)
		    ifstr(i) $(ProductName) != "TLNKV"
			goto nextnetcard
		    endif
		    GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
		    set ServiceName = *($(ServiceNameInfo), 4)
		    Debug-Output "   ServiceName = "$(ServiceName)
		    OpenRegKey $(!REG_H_LOCAL) "" "System\CurrentControlSet\Services\"$(ServiceName) +
			  $(MAXIMUM_ALLOWED) ServiceKey
		    DeleteRegTree $(ServiceKey) ""
		    DeleteRegTree $(NetworkCardKey) ""
		endif
nextnetcard = +
	    EndForListDo
	endif   
	OpenRegKey $(!REG_H_LOCAL) "" "Software\Microsoft\TLNKVISA" $(MAXIMUM_ALLOWED) KeyProduct2
	ifstr $(KeyProduct2) == $(KeyNull)
	    LibraryProcedure NCPA_RESULT $(NCPA_HANDLE), CPlSetup $(!STF_HWND), STARTSVC, NetDetect
	    set !NTN_InstallMode = Install
	    Shell "" InstallOption $(!STF_LANGUAGE) "TLNKVISA" $(SrcDir) "YES" "YES" "NO"
	    set !NTN_InstallMode = Update
	else
	endif
    else
    endif
    FreeLibrary $(NCPA_HANDLE)
    goto end
successful = +
    Debug-Output "OEMNAD3T.INF: Succesful: IN"

    goto end
abandon = +
    Debug-Output "OEMNAD3T.INF: Abandon: IN"

    ForListDo $(OEM_ABANDON_OPTIONS)
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $($)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "OEMNAD3T.INF: ShellCode error"
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), FALSE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "OEMNAD3T.INF: ShellCode error"
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif
    goto end
warning = +
    Debug-Output "OEMNAD3T.INF: Warning: IN"

    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
	goto $(from)
    else
	goto "end"
    endif
nonfatalinfo = +
    Debug-Output "OEMNAD3T.INF: Nonfatalinfo: IN"

    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Debug-Output "OEMNAD3T.INF: Nonfatal: IN"

    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    Debug-Output "OEMNAD3T.INF: nonfatalmsg: IN"

    ifstr(i) $(Error) == ""
	Set Severity = NONFATAL
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(from)
    else
	goto "end"
    endif
fatalregistry = +
    Debug-Output "OEMNAD3T.INF: fataregistry: IN"

    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fataldetect = +
    Debug-Output "OEMNAD3T.INF: fataldetect: IN"

    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "OEMNAD3T.INF: ShellCode error: cannot get an error string."
	goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal
fatal = +
    Debug-Output "OEMNAD3T.INF: fatal: IN"

    ifstr(i) $(Error) == ""
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    Debug-Output "OEMNAD3T.INF: ShellCodeError - In"
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    Debug-Output "OEMNAD3T.INF: Setfailed - In"
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
	set OEM_ABANDON_ON = FALSE
	goto abandon
    endif
    goto end
end = +
    Debug-Output "OEMNAD3T.INF: end: IN"
    goto term
term = +
    Debug-Output "OEMNAD3T.INF: term - In"
    Return $(CommonStatus)

paceentries = +
;;
;; Pace Stuff included.
    ;  Put PACE information into registry ***START
    ;  This section contains all of the information for the PAce control panel
    ;  The adapter name goes in the registry key: LM\software\3Com\pacecards\TLNKV
    ;  The application specific stuff goes in LM\software\3Com\pacecards\applications

    ;*** this is the uninstaller part define 3CNUMBER to be the 3C product code for this product
    ;open software registry key to put uninstall info in registry.

    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(ProductSoftwareName) $(!REG_KEY_ALL_ACCESS) KeyNt
    set TrayIconList = {3CUNINSTALL,$(NoTitle),$(!REG_VT_SZ),$(3CNUMBER)}
    SetRegValue $(KeyNt) $(TrayIconList)
    set TrayIconList = {PACENAME,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)}
    SetRegValue $(KeyNt) $(TrayIconList)
    CloseRegKey $(KeyNt)
    ;*** end uninstaller part

    ; open registry key SOFTPACEKEY = LM\Software
    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE" $(!REG_KEY_WRITE) SOFTPACEKEY
    
    ; open registry key SOFTPACEKEY = LM\Software\3Com and create it if it is not there
    OpenRegKey $(SOFTPACEKEY) "" "3Com" $(!REG_KEY_WRITE) COMPACEKEY
    ifstr $(COMPACEKEY) == ""
	CreateRegKey $(SOFTPACEKEY) {"3Com", 0, GenericClass} "" $(!REG_KEY_WRITE) "" COMPACEKEY
    endif
    
    ; open registry key SOFTPACEKEY = LM\Software\3Com\PACECards and create it if it is not there
    OpenRegKey $(COMPACEKEY) "" "PACECards" $(!REG_KEY_WRITE) CARDPACEKEY
    ifstr $(CARDPACEKEY) == ""
	CreateRegKey $(COMPACEKEY) {"PACECards", 0, GenericClass} "" $(!REG_KEY_WRITE) "" CARDPACEKEY
    endif

    ; open registry key SOFTPACEKEY = LM\Software\3Com\PACECards\TLNKV and create it if it is not there
    OpenRegKey $(CARDPACEKEY) "" $(ProductSoftwareName) $(!REG_KEY_WRITE) TLNKVPACEKEY
    ifstr $(TLNKVPACEKEY) == ""
	CreateRegKey $(CARDPACEKEY) {$(ProductSoftwareName), 0, GenericClass} "" $(!REG_KEY_WRITE) "" TLNKVPACEKEY
    endif
    
    ; Set the adapter name in the registry
    SetRegValue $(TLNKVPACEKEY) {"Description", 0, $(!REG_VT_SZ), $(GROUP_NAME)}
	
    ; open registry key SOFTPACEKEY = LM\Software\3Com\PACECards\applications and create it if it is not there
    OpenRegKey $(CARDPACEKEY) "" "Applications" $(!REG_KEY_WRITE) APPPACEKEY
    ifstr $(APPPACEKEY) == ""
	CreateRegKey $(CARDPACEKEY) {"Applications", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPPACEKEY
    endif
; Each one of theses chunks adds an application and its values to the registry.
; This section adds this to the registry under the key:
;   HKEY_LOCAL_MACHINE\SOFTWARE\3Com\PACECards\Applications\APPLICATION_NAME
;                   Protocol=PROTOCOL_NAME
;                   Enabled=TRUE_OR_FALSE
;                   RangeStart=4_DIGIT_HEX#1
;                   RangeEnd=4_DIGIT_HEX#2
;
;        OpenRegKey $(APPPACEKEY) "" "APPLICATION_NAME" $(!REG_KEY_WRITE) APPSPECPACEKEY
;        ifstr $(APPSPECPACEKEY) == ""
;           CreateRegKey $(APPPACEKEY) {"APPLICATION_NAME", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
;        endif
;        set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"PROTOCOL_NAME"},+
;                {Enabled,$(NoTitle),$(!REG_VT_SZ),"TRUE_OR_FALSE"}, +
;                {RangeStart,$(NoTitle),$(!REG_VT_SZ),"4_DIGIT_HEX#1"}, +
;                {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"4_DIGIT_HEX#2"}}
;        Shell  $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
;        ifint $($ShellCode) != $(!SHELL_CODE_OK)
;            goto ShellCodeError
;        endif
;        CloseRegKey $(APPSPECPACEKEY)

	OpenRegKey $(APPPACEKEY) "" "Emotion CreativePartner (IPX)" $(!REG_KEY_WRITE) APPSPECPACEKEY
	ifstr $(APPSPECPACEKEY) == ""
	    CreateRegKey $(APPPACEKEY) {"Emotion CreativePartner (IPX)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
	endif
	set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"IPX"},+
		{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
		{RangeStart,$(NoTitle),$(!REG_VT_SZ),"87C7"}, +
		{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"87C8"}}
	Shell  $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	CloseRegKey $(APPSPECPACEKEY)
   
	 
	OpenRegKey $(APPPACEKEY) "" "Emotion CreativePartner (TCP/IP)" $(!REG_KEY_WRITE) APPSPECPACEKEY
	ifstr $(APPSPECPACEKEY) == ""
	    CreateRegKey $(APPPACEKEY) {"Emotion CreativePartner (TCP/IP)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
	endif
	set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
		{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
		{RangeStart,$(NoTitle),$(!REG_VT_SZ),"0453"}, +
		{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"0455"}}
	Shell  $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	CloseRegKey $(APPSPECPACEKEY)

	OpenRegKey $(APPPACEKEY) "" "InSoft Communique!" $(!REG_KEY_WRITE) APPSPECPACEKEY
	ifstr $(APPSPECPACEKEY) == ""
	    CreateRegKey $(APPPACEKEY) {"InSoft Communique!", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
	endif
	set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
		{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
		{RangeStart,$(NoTitle),$(!REG_VT_SZ),"1025, 1500"}, +
		{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1050, 1525"}}
	Shell  $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	CloseRegKey $(APPSPECPACEKEY)

	OpenRegKey $(APPPACEKEY) "" "Picturetel LiveLAN (over IPX)" $(!REG_KEY_WRITE) APPSPECPACEKEY
	ifstr $(APPSPECPACEKEY) == ""
	    CreateRegKey $(APPPACEKEY) {"Picturetel LiveLAN (over IPX)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
	endif
	set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"IPX"},+
		{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
		{RangeStart,$(NoTitle),$(!REG_VT_SZ),"4050"}, +
		{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"4082"}}
	Shell  $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	CloseRegKey $(APPSPECPACEKEY)

	OpenRegKey $(APPPACEKEY) "" "Picturetel LiveLAN (over TCP/IP)" $(!REG_KEY_WRITE) APPSPECPACEKEY
	ifstr $(APPSPECPACEKEY) == ""
	    CreateRegKey $(APPPACEKEY) {"Picturetel LiveLAN (over TCP/IP)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
	endif
	set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
		{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
		{RangeStart,$(NoTitle),$(!REG_VT_SZ),"06a4"}, +
		{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"06d6"}}
	Shell  $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	CloseRegKey $(APPSPECPACEKEY)

	OpenRegKey $(APPPACEKEY) "" "Precept FlashWare" $(!REG_KEY_WRITE) APPSPECPACEKEY
	ifstr $(APPSPECPACEKEY) == ""
	    CreateRegKey $(APPPACEKEY) {"Precept FlashWare", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
	endif
	set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
		{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
		{RangeStart,$(NoTitle),$(!REG_VT_SZ),"8000, C000"}, +
		{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"8000, C000"}}
	Shell  $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	CloseRegKey $(APPSPECPACEKEY)

	OpenRegKey $(APPPACEKEY) "" "Progressive Networks RealAudio" $(!REG_KEY_WRITE) APPSPECPACEKEY
	ifstr $(APPSPECPACEKEY) == ""
	    CreateRegKey $(APPPACEKEY) {"Progressive Networks RealAudio", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
	endif
	set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
		{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
		{RangeStart,$(NoTitle),$(!REG_VT_SZ),"6970"}, +
		{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"7170"}}
	Shell  $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	CloseRegKey $(APPSPECPACEKEY)

	OpenRegKey $(APPPACEKEY) "" "Starlight Networks StarCast" $(!REG_KEY_WRITE) APPSPECPACEKEY
	ifstr $(APPSPECPACEKEY) == ""
	    CreateRegKey $(APPPACEKEY) {"Starlight Networks StarCast", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
	endif
	set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
		{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
		{RangeStart,$(NoTitle),$(!REG_VT_SZ),"1911"}, +
		{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1911"}}
	Shell  $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	CloseRegKey $(APPSPECPACEKEY)

	OpenRegKey $(APPPACEKEY) "" "VCON Cruiser 100" $(!REG_KEY_WRITE) APPSPECPACEKEY
	ifstr $(APPSPECPACEKEY) == ""
	    CreateRegKey $(APPPACEKEY) {"VCON Cruiser 100", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
	endif
	set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
		{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
		{RangeStart,$(NoTitle),$(!REG_VT_SZ),"1500, 1600"}, +
		{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1500, 1600"}}
	Shell  $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	CloseRegKey $(APPSPECPACEKEY)

	OpenRegKey $(APPPACEKEY) "" "VXtreme Web Theater" $(!REG_KEY_WRITE) APPSPECPACEKEY
	ifstr $(APPSPECPACEKEY) == ""
	    CreateRegKey $(APPPACEKEY) {"VXtreme Web Theater", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
	endif
	set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
		{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
		{RangeStart,$(NoTitle),$(!REG_VT_SZ),"7000"}, +
		{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"7020"}}
	Shell  $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	CloseRegKey $(APPSPECPACEKEY)

	OpenRegKey $(APPPACEKEY) "" "Xing Technology Streamworks" $(!REG_KEY_WRITE) APPSPECPACEKEY
	ifstr $(APPSPECPACEKEY) == ""
	    CreateRegKey $(APPPACEKEY) {"Xing Technology Streamworks", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
	endif
	set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
		{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
		{RangeStart,$(NoTitle),$(!REG_VT_SZ),"1558"}, +
		{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1558"}}
	Shell  $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif

	OpenRegKey $(APPPACEKEY) "" "Vosaic Software Server" $(!REG_KEY_WRITE) APPSPECPACEKEY
	ifstr $(APPSPECPACEKEY) == ""
	    CreateRegKey $(APPPACEKEY) {"Vosaic Software Server", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
	endif
	set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"TCP"},+
		{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
		{RangeStart,$(NoTitle),$(!REG_VT_SZ),"04D3"}, +
		{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"04D3"}}
	Shell  $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif

	OpenRegKey $(APPPACEKEY) "" "Vosaic Software Client" $(!REG_KEY_WRITE) APPSPECPACEKEY
	ifstr $(APPSPECPACEKEY) == ""
	    CreateRegKey $(APPPACEKEY) {"Vosaic Software Client", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
	endif
	set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
		{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
		{RangeStart,$(NoTitle),$(!REG_VT_SZ),"F169"}, +
		{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"F17D"}}
	Shell  $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif

    ; Close all opened registry keys.
	CloseRegKey $(APPSPECPACEKEY)
	CloseRegKey $(TLNKVPACEKEY)
	CloseRegKey $(APPPACEKEY)
	CloseRegKey $(CARDPACEKEY)
	CloseRegKey $(COMPACEKEY)
	CloseRegKey $(SOFTPACEKEY)

	goto Finishwriteparameters

;;
;;
goto Finishwriteparameters

[Install-Option]
    Debug-Output "OEMNAD3T.INF: Install-Option - In"
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
	AddSectionFilesToCopyList Files-$(Option) $(SrcDir)\nt95 $(!STF_WINDOWSSYSPATH)\drivers
	AddSectionFilesToCopyList Files-Dll $(SrcDir)\nt95 $(!STF_WINDOWSSYSPATH)
	AddSectionFilesToCopyList Files-Cpl $(SrcDir)\nt95 $(!STF_WINDOWSSYSPATH)
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit
[Install-Update]
   Debug-Output "OEMNAD3T.INF: Install-Update - In"
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir)\nt95 $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-Dll $(SrcDir)\nt95 $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-Cpl $(SrcDir)\nt95 $(!STF_WINDOWSSYSPATH)
   exit
[Install-Dll]
   Debug-Output "OEMNAD3T.INF: Install-Dll - In"
   set STF_VITAL        = ""
   ifstr(i) $(AddCopy) == "YES"
       AddSectionFilesToCopyList Files-Dll $(SrcDir)\nt95 $(!STF_WINDOWSSYSPATH)
       AddSectionFilesToCopyList Files-Cpl $(SrcDir)\nt95 $(!STF_WINDOWSSYSPATH)
   endif
   ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
   endif
   exit
[Source Media Descriptions]
     1 = "3Com TokenLink Velocity ISA (3C319) Adapter"
[Signature]
    FileType = MICROSOFT_FILE
[GetSignature]
    read-syms Signature
    return $(FileType)
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
;INF_PROCESSOR = I386

[Files-Inf]
    1,Oemsetup.inf,    SIZE=1000,     RENAME=$(!UG_Filename)
[Files-TLNKVISA]
    1,TLNKV.SYS , SIZE=45568
[Files-Dll]
    1,tlnk.dll , SIZE=6000
[Files-Cpl]
    1,Pacecfg.cpl, SIZE=10000
    1,Pacecfg.hlp, SIZE=6617
	1,UNTLNKV.EXE, SIZE=6617
[LanguagesSupported]
    ENG
[OptionsTextENG]
    TLNKV    = "3Com TokenLink Velocity ISA (3C319) Adapter"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
	       "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
AdapterName = "3Com TokenLink Velocity ISA (3C319) Adapter"
DriverName = "3Com TokenLink Velocity ISA (3C319) Adapter Driver"
FunctionTitle   = "3Com TokenLink Velocity ISA (3C319)"
ProductSoftwareDescription      = $(DriverName)
ProductHardwareDescription      = $(AdapterName)
ProductSoftwareTitle    = $(DriverName)
ProductHardwareTitle    = $(AdapterName)
DialogDllName   = "Tlnk.dll"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."
DialogDllName   = "tlnk.dll"
IOBaseAddrList = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues = ^(IOBaseAddrChoices, 2)
[DialogConstantsENG]
Help        = "&Help"
Exit        = "C&ancel"
OK          = "&OK"
HelpContext = ""
Continue    = "&Continue"
Cancel      = "Ca&ncel"
Priority    = "&Priority"

[FileDependentDlgENG]
NodeAddressLabel = "&Network Address"
CheckBox1 = "&Auto Ring Speed Detect"
DlgText = "Please select values for the following field:"
Combo1Label = "&I/O Port:"
FunctionTitle   = $(AdapterName)
DlgType = "RadioCombination"
DlgTemplate = "TLNKV"
Caption = $(FunctionTitle)
OptionsGreyed = {}
CBOptionsGreyed = {}
NotifyFields = {NO, NO}
HelpContext = 1
Combo1List = $(IOBaseAddrList)
Combo1Out  = $(IOBaseAddrValue)
ComboListItemsIn = {Combo1List}
ComboListItemsOut = {Combo1Out}
EditField  = $(NodeAddressValue)
EditTextIn = $(EditField)
EditTextLim = 12
EditLabel  = $(NodeAddressLabel)
;RCCtlFocusOn = 403
[IOBaseAddrChoices]
IOBase_1  = "0x1",1
IOBase_2  = "0x2",2
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2024 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web3, load: 2.43