T:\PIE2.2_Final\SVMESM>echo calling omsacntl spoof
calling omsacntl spoof
T:\PIE2.2_Final\SVMESM>echo calling omsacntl spoof
calling omsacntl spoof
ESM communications failed.
Embedded Server Management image update program. Revision: A4.11.
Image data: Format version= 1.2, Firmware version= A53.
Current Firmware Image Firmware
Version Version
Embedded Server Management.....(F Part) 5.42
...............................(S Part) 5.42
System Backplane....................... 5.49
Power Supply Paralleling Board.(F Part) 2.41
...............................(S Part) 2.41
Hot Plug PCI Controller................ 1.18
SDS 100....................... #1
Harrier Backplane...................... 13.00
Harrier Power Supply Paralleling Board. 10.00
System Backplane - Secondary........... 1.29
Error reading dynamic value on sensor(hex) 20
Hot Plug PCI FPGA...................... 15.0
Reading Data File
Verifying Data File CRC
Server Management Backplane Download Utility Version: A01
Firmware Revision: A02
Firmware Versions Current Image
Primary System Backplane.......................... N/A 1.01
Secondary System Backplane........................ N/A 1.01
Done.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.