PowerVault 136T Tape Library Firmware Release Notes These release notes are applicable to the following firmware versions: *PowerVault 136T Library Firmware (for all drive types): 3.21.0002 *PowerVault 136T Remote Management Card Firmware: 180D.00002 *PowerVault 136T LTO2 Tape Drive Firmware: 37RH *PowerVault 136T LTO Tape Drive Firmware: E34A *PowerVault 136T SDLT220 & SDLT320 Tape Drive Firmware: 5252 (v82) *PowerVault 136T FC Module (First Generation) Firmware: 4.25.04 --- PowerVault 136T Library Firmware 3.21.0002 Previous version: 3.21.0002 The firmware did not change from the last release. --- PowerVault 136T Remote Management Card 180D.00002 Previous version: 180D.00002 The firmware did not change from the last release. --- PowerVault 136T LTO2 Drive Firmware 37RH Previous version: 37RH The firmware did not change from the last release. --- PowerVault 136T LTO Drive Firmware E34A Previous version: E34A The firmware did not change from the last release. --- PowerVault 136T SDLT Drive Firmware 5252 (V82) Previous version: 4646 (V70) FIXES -Remaining and total tape capacity as appears in backup software. -Drive or system hang conditions. -Restore and Verify failures when using NetBackup for Linux. IMPROVES -Reduced incidence of drive related write/read errors, including CRC errors -Optimized head cleaning requests. -Enhanced cartridge load/unload and tape calibration algorithims. -Backward read capability --- PowerVault 136T Fibre Channel Module (First Generation) Firmware 4.25.04 Previous version: 4.25.04 The firmware did not change from the last release.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.