sys.ini Driver File Contents (DTK_2.3-WINPE-2543.exe)

; The following section "Variable Names" denotes the variable names to use in 
; setting the environment variables for the hardware found by HWD.EXE.  
; Below are individual sections for each type of hardware to be discovered.

[Variable Names]
;Do not change the names on the left-hand side.
VIDEO=DVIDEO
NIC=DELLNIC
IDE=DIDE
SCSI=DSCSI
RAID=DRAID
DEVICE=DDEVICE
MACHINE=MACH

[MACH]
;The machine id can be readwith sysinfo --sysid.  It is the left-hand value.
00D1=PE2550
00D9=PE2500
00DF=PE1550
0106=PE4600
0109=PE6600
010A=PE6650
0135=PE1600
0141=PE0650
014A=PE1750
0165=PE0750
0167=PE0700
011C=PE2500
011B=PE1650
0121=PE2650
0123=PE2600
0124=PE1655
016C=PE1850
016D=PE2850
016E=PE2800
016F=PE6800
0170=PE6850
0183=PE1800
0185=PE0800
018A=PE1855
019A=PE1425
01B6=PE0850
01B7=PE0830
01B1=PE2900
01B2=PE2950
01B3=PE1950
01EB=PE1435
01BB=PE1955
01B8=PE1900
01E6=PE0860
01E7=PE0840
01EA=PE6950 
0205=PE2970

[DVIDEO]
1002,4742=RAGE3DPRO2X		; GX1
1002,4744=RAGE3DPROAGP1X	; GXa
1002,4757=RAGE3D2CAGP           ; G1, PE1300
1002,4758=MACH64GX		; XE5xxx
1002,4749=RAGE3DPRO             ; PE6350
1002,4752=RAGEXL	        ; PE1655MC,
1002,4759=RAGE3DIIC             ; PE2400, PE2450, PE4400
1002,4C4D=RAGEMOBIL             ; CPxH, CPxJ
1002,5159=RADEON7000		; DRAC
102B,0519=MGA-MILL		; GXPro
10C8,0004=NMGC128XD             ; CP..ST, CPi
10C8,0005=NMGC256AV             ; CPiA, LS
10C8,0006=NMGC256ZX             ; CPtC, CS
10DE,002D=RIVATNT264		; GX300, GX200
10DE,0100=GEFORCE256            ; PCI card
5333,8811=TRIO64V+              ; GXi
5333,8901=TRIO64V2		; Gn+
5333,8A01=VIRGE/GX              ; PCI card
8086,7125=INTEL810E		; GX110-both
1020,5159=RADEON7000M		; PE1850
18CA,0020=XGI			; PE830, 850
1002,515E=ES1000   

[DELLNIC]
10B7,5900=3C590                 ; GXPro
10B7,5950=3C595                 ; 
10B7,9050=3C905                 ; C/PortI, C/DockI, Gn+, GXa, GXPro
10B7,9055=3C905B		; G1, GX1
10B7,9200=3C905C           	; GX110-both, GX200, GX300, WS420, C/PortII, C/DockII
10B7,9800=3C980                 ; add-in card
8086,1229=INTELPRO100          ; PE2450, PE4400, PE2400, PE6350, PE1300
8086,1001=INTELPRO1000F        ; 
8086,1004=INTELPRO1000T        ; PE1650, 
8086,1008=INTELPRO1000XT       ; 
8086,1009=INTELPRO1000XF       ; 
8086,100E=82540EM               ; PE1600SC
8086,1010=82546EB               ; PE0650
8086,105E=INTELNIC		; PE6800
8086,1075=INTELPRO1000		; 
8086,1076=INTEL82541EI		; PE1850
8086,107B=INTEL8254GB		; PE1855
8086,108A=INTEL82546GB		; add in card.
14E4,1644=BCM5700               ; PE2550,
14E4,1645=BCM5700		; PE2650
14E4,1648=BCM5704		; PE1750
14E4,1659=BCM5721		;
14E4,16A7=BROADCOM		; PE1655MC 
14E4,164C=BCM5708

[DIDE]
8086,2411=INTEL82801IDE       ; GX110-both, GX300, GX200, WS420
8086,7010=INTELEIDE            ; GXPro
8086,7111=INTELIDE             ; G1, CP..ST, Gn+, GX1, GXa, PE1300, CPtC, CPiA
8086,24DB=INTELICH5IDE		; PE1800
1095,0646=CMDEIDE              ; C/DockI, C/DockII
1166,0211=PEQUR/ROSSIDE        ; PE2450, PE4400, PE2400
1166,0212=CSB5PCIEDIE COnt    ; PE1650
1166,024B=BCMIDE 

[DSCSI]
1000,0001=SYMBIOS8100S		; XE5xxx
9005,001F=AIC-7890/1            ; PE6350, PE1300
9005,00C5=AIC-7899		; PE2450
9005,00CF=AIC-7899              ; WS420
9004,6078=AIC-7860              ; PE6350
9004,8078=AIC-7880              ; PE2400, PE4400, C/DockII
1077,2200=QLogic                ; PE4400
1077,1216=QLogic 
1000,0030=LSI			;PE1655MC

[DRAID]
8086,1960=AMI                   ; Perc2, Perc2 DC
101E,1960=LSI			; Perc 3 QC Dc DCL SC
1028,000E=LSI			; Perc 4 Di
1028,0001=ADAPTEC		; PE2400
1028,0002=ADAPTEC               ; PE4400 (Adaptec 3/Di)
1028,0003=ADAPTEC		; PE2450
1028,000A=ADAPTEC 		;
1028,0013=LSI			; PE1850, PE2800, PE2850
1011,0046=ADAPTEC               ; Perc2 QC (6300)
1011,000A=ADAPTEC		; Perc 3 Di
9005,0285=ADAPTEC		; CERC/SATA
8086,24DF=SOFTRAID		; SATA 2S (PE1800 (ICH5)
8086,2652=SOFTRAID		; SATA 2S (ICH6)
1000,1960=LSI
1000,0408=LSI
1028,0015=LSI			;PERC 5/E, PERC 5/I, PERC 5/i
1028,1F04=LSI			;Dell SAS 5/E Adapter Controller
1028,1F06=LSI			;Dell SAS 5/i Integrated Controller
1028,1F07=LSI			;Dell SAS 5/iR Integrated Controller
1028,1F08=LSI			;Dell SAS 5/iR Integrated Controller
1028,1F09=LSI			;Dell SAS 5/iR Adapter Controller


[DDEVICE]
;This is for devices that don't have class names or do not fit into a category
1028,000C=RAC			; Remote Access Controller
1028,0011=RAC			; Remote Access Controller
1028,0012=RAC			; Remote Access Controller


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.71