0=RAIDCFG Command successful! 1=Error! Incorrect Syntax. 2=Failure! 3=Illegal operation 4=Unsupported operation 5=Device not found 6=Format boot drive illegal 7=Buffer too small 8=Virtual Disk contains boot partition. Use force option to delete 9=Init boot drive failed 10=Format boot drive failed 11=Cannot write boot drive 12=Unsupported RAID value 13=Invalid RAID configuration 14=Span depth not in range 15=RAID 1 failed 16=Exactly 2 array disks are required to create a RAID 1 virtual disk 17=Unsupported stripe size value 18=RAID 5 only 19=RAID 5 error 20=A minimum of 3 array disks are required to create a RAID 5 virtual disk 21=RAID 0 failed 22=RAID 10 failed 23=RAID 50 failed 24=RAID 5 not supported 25=RAID 50 not supported 26=Size too small for given RAID type 27=Wrong number of disks for RAID 1-concatenated 28=Insufficient space to mirror disks 29=Create Mirror not supported 30=Disk in use 31=Disk Lock operation failed 32=Disk locked 33=Disk Unlock operation failed 34=Disk Unlocked 35=Disk failed on rebuild 36=Hot Spare not free 37=Disk Diagnostic failed 38=Disk Rebuild failed 39=Disk Format failed 40=Cancel of Disk Diagnostic Failed 41=Cancel of Disk Rebuild failed 42=Cancel of Disk Format failed 43=Assign Hot Spare failed 44=Disk too Small for Hot Spare 45=Unassign Hot Spare failed 46=Prepare Disk for Removal failed 47=Disk Online failed 48=Disk Offline failed 49=UnMount Operation failed 50=Mount Operation failed 51=Cannot Format Array Disk 52=Bad chunk size 53=Invalid disk 54=Virtual disk not found 55=Virtual disk locked 56=Drive in use 57=Reached maximum physical size 58=Reached maximum count of virtual disks 59=There is not enough free space on the array disk(s) to allow the operation to complete; the size of the virtual disk is too large; or communication to the array disk(s) has been lost 60=Limit your array disk selection to those disks already included in another single virtual disk or to those array disks that are not used at all by another virtual disk. 61=Invalid Parameter 62=Failed drive cannot be added 63= The controller cannot support the number of array disks that you have selected. Choose a smaller number. 64=Delete virtual disk failed. Controller busy 65=Delete virtual disk failed 66=Create virtual disk failed 67=Create virtual disk failed. Controller busy 68=Create virtual disk failed. Failed to map virtual disk to operating system disk. 69=Create virtual disk failed. Failed to map virtual disk to operating system disk. 70=Virtual disk initialization failed. 71=Virtual disk initialization failed. Controller busy 72=Virtual disk reconstruction failed. Controller busy 73=Virtual disk resynching failed. Controller busy 74=Flush Virtual disk's cache failed on controller. 75=Virtual disk partition specified not found. 76=Unsupported cache policy value 77=Unsupported write policy value 78=Unsupported read policy value 79=Cancel initialization on virtual disk failed 80=Cancel reconstruction on virtual disk failed 81=Cancel resynchronization on virtual disk failed 82=The maximum number of virtual disks that can be created has been reached 83=The new virtual disk must use only the remaining free space on the array disks used in the last virtual disk you created. Select all array disks that are used in the last virtual disk you created. 84=You have selected an array disk that is in a degraded or failed state. Choose another array disk. 85=Delete the last created virtual disk first 86=Virtual disk initialized for use and no override requested 87=Virtual disk type requested is invalid for the attempted operation. 88=Virtual disk Move operation failed. Cannot rename, virtual disk is already in use. 89=Failover invalid 90=Virtual disk resynching 91=Virtual disk resynch failed 92=Virtual disk reconstruct failed 93=Cannot format a virtual disk that contains a boot or system partition 94=Cannot initialize a virtual disk that contains a boot or system partition 95=Virtual disk Copy failed. 96=Virtual disk mirror set required. 97=Virtual disk Create - Read-only failed 98=Virtual disk Create - Read-write failed 99=Virtual disk - Clear-to-zero failed 100=Virtual Disk Requires Non Multilevel. 101=Virtual Disk Promote Operation failed. 102=Specified virtual disk has no drive letter assigned to it 103=Cannot expose virtual disk 104=Cannot reconfigure virtual disk 105=Cannot stop the reconfiguration of the virtual disk. 106=SMART report count not supported 107=Operations on hidden virtual disks are not allowed. 108=Virtual disk is in use 109=The virtual disk is in use. It cannot be reconfigured at this time. 110=Virtual disk operation is temporarily unavailable. Initialization in progress. 111=Virtual disk operation is temporarily unavailable. Reconstruction in progress. 112=Virtual disk operation is temporarily unavailable. Rebuild in progress. 113=Virtual disk operation is temporarily unavailable. Check Consistency in progress. 114=Specified virtual disk too small 115=Virtual disk operation not supported. Size too small. 116=Operation is temporarily unavailable. Space in use. 117=Cannot reconfigure to the given RAID level 118=Cannot reconfigure from current RAID level to the given RAID level 119=One of the array disks selected for the virtual disk is already in use 120=Virtual disk operation not supported. Cannot use non-RAID disk. 121=Controller Read Configuration failed 122=Controller Write Configuration failed 123=Controller cache flush failed 124=Enable alarm on controller failed 125=Disable alarm on controller failed 126=Quiet alarm on controller failed 127=Controller failed to perform the task 128=Specified bus not found for controller 129=Call to set cache mode on the controller failed 130=Unexpected controller error 131=Controller out of memory 132=Invalid controller state 133=Controller failed 134=Controller busy 135=Controller does not exist 136=Controller name is invalid 137=Controller is iterated 138=Rename of virtual disk was not successful 139=The controller was not able to erase the file system from the specified virtual disk 140=The controller was not able to add space to the specified concatenation set 141=The controller was not able to get the status of the specified mirror set 142=The controller was not able to set the requested failover space 143=The controller cannot get the failover space information 144=Controller cannot unmirror the specified virtual disk 145=The controller could not split the specified virtual disk 146=The controller could not lock the specified virtual disk 147=Controller IO paused 148=No controller parameter support 149=Controller does not recognize parameter symbol 150=Controller Battery Recondition failed 151=Controller Get disk signature failed 152=Controller Read Flags failed 153=Controller Set Flags failed 154=Controller Remove Snap Shot failed 155=Controller not supported 156=Controller device initialization failure 157=Partner controller already opened read-write 158=No partner controller found 159=The virtual disk is not valid for requested operation 160=Cannot communicate with controller 161=Set operation failed 162=Operation to update error count of SMART device has failed 163=Operation to clear error count of SMART device has failed 164=Driver could not execute 165=Cannot delete virtual disk 166=Cannot set temperature probe. Invalid value entered. 167=Cannot set enclosure tag. Invalid value entered. 168=Cannot set enclosure alarm 169=Temperature probe value out of range 170=Cannot set cache mode 172=Data will be lost on the secondary disk and a reboot will be forced 173=Cluster Services (MSCS) is running. Deleting a virtual disk that contains a cluster resource can result in unpredictable errors or system hangs (quorum disk). You should shut down cluster services before deleting cluster resources. Are you sure you want to proceed? 174=Cannot perform Create Virtual Disk or Delete Virtual Disk while the other server in a cluster is online. Please shut one of the servers down and retry the operation. 176=Invalid array disks or failover drives selected for reconfigure/create operation. Please make sure that all array disks and failover drives associated with the virtual disk are selected. 177=The maximum number of partitions have already been created on one of the selected array disk(s).Each array disk can hold portions (partitions) of up to virtual disks. This virtual disk cannot be created because one or more array disk(s) have reached the partition limit. 178=The virtual disk is in use. Please close any applications that use the virtual disk and unmount any file systems that reside on the virtual disk. 179=The firmware version is not supported. Please update the firmware from http://support.dell.com. 180=The specified device does not have enough free space to be used as failover space for the specified virtual disk. 181=The operation failed. Please rescan the controller and retry the operation. 182=The operation cannot be performed while a task is running on the specified virtual disk. 183=The specified virtual disk has no dead disk segments. 184=The operation cannot be performed at this time. The firmware can recondition a battery that has a Degraded or Power Low state. The firmware will not recondition a battery that is functioning normally or that has a Ready, Failed or Missing state. 185=The version of the controller firmware installed on your system does not support this operation. 186=There are no disks of the correct type available to be assigned as a hot spare. 187=There are no disks of sufficient size available to be assigned as a hot spare. 188=There are no disks of the correct type and sufficient size available to be assigned as a hot spare. 189=The Create Virtual Disk task was successful but the operating system may not be aware of the new virtual disk. 191=The import of foreign configurations is complete. Some configurations could not be imported. 192=Enable alarm command failed. The enclosure processor is busy or a firmware download is in progress. 193=Disable alarm command failed. The enclosure processor is busy or a firmware download is in progress. 194=Quiet alarm command failed. The enclosure processor is busy or a firmware download is in progress. 195=An error occurred while resetting a temperature probe. 200=No array disks found! 201=Invalid Virtual Disk ID! 202=RAID Type & Size are required to create a virtual disk. Ensure that the RAID type and the size are correct. 203=Invalid Environment command! 204=File is not writeable! 205=Setting Environment Variable Command failed! 206=Filename is not provided! 207=Invalid Strict option! Please provide a valid number between 1 and 100. 208=Span depth is not needed for this RAID type. 209=Array disk(s) cannot be part of virtual disk(s) and also be hotspares. 210=Cannot have silent and logfile switch with the same command. 211=Invalid array disk(s)! 212=Invalid failover disk(s)! 213=Creation of a virtual disk on this RAID controller requires the use of the entire disk space of the array disks. The size or -sz parameter is not needed. 214=Invalid size given! size=max or -sz=max is not supported for this RAID controller. 215=The value given for envname or -envn is null or too long. 216=Invalid virtual disk size! 217=The strict option provided failed! Virtual disk is not created. 218=Unable to determine optimum size for Virtual disk. Ensure that the array disks are of the same protocol (i.e. SAS, SATA, SCSI). If there is a mismatch of the array disks then the RAIDCFG will not be able to determine the optimum size. In addition, also ensure that there is enough drives and size available for the specified virtual disk. 219=One or more array disks selected to create virtual disk or hotspare doesn't have enough disk space. Please make sure that all the array disks and failover drives selected have enough free space. 220=The number of array disks provided is incorrect for the requested RAID Type! RAID 1 requires exactly 2 array disks, RAID 5 requires at least 3 array disks, RAID 10 requires at least 4 array disks and RAID 50 requires at least 6 array disks. 221=No free array disks found! 222=No global failover disks found! 223=One or more array disks selected for the virtual disk has foreign configuration. 224=Error in opening the file. 225=SAS 5/IR requires atleast two physical disks to create RAID 0 or RAID 1.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.