SSD RELEASE HISTORY
-------------------
SSD Description: NeoMagic 2160 Video Drivers v6.17.01Q
Systems Supported: Latitude CP and CPi
--------------------------------------------------------------------------------
Revision: A05
Revision Date: 02/24/99
--------------------------------------------------------------------------------
File Description:
08/02/96 11:27a 1,537 INSTALL.TXT
02/18/98 08:19a 3,985 LICENSE.TXT
10/15/98 06:53p 336,896 NEOMAGIC.DLL
11/04/98 04:07p 7,991 NMGC.CAT
10/15/98 06:51p 98,816 NMGC.DRV
11/04/98 04:07p 4,000 NMGC.INF
10/15/98 06:52p 34,816 NMGCDD.DLL
10/15/98 06:52p 21,569 NMGCVDD.VXD
10/15/98 06:52p 7,034 NMGCVDD2.VXD
10/15/98 06:52p 35,840 NMGCVP32.DLL
10/15/98 06:53p 21,952 NMGCVPM.DRV
11/19/98 02:50p 5,757 RELEASE.TXT
10/15/98 06:51p 4,176 VPMDD16.DLL
10/15/98 06:53p 24,576 VPMDD32.DLL
Revision History:
VERSION A05 (02/24/99)
- Added MacroVision support code for Win 98 DVD playback.
- Fixed Korean display properties page.
- Fixed Thai display properties page.
- In congunction with Latitude BIOS vA07(vA03) (or later) for CP(CPi) fixes
several problems associated with ACPI:
- Fixes no longer being able to see save to disk screen.
- Fixes removal of the CRT while suspended, then resuming leaving you
on CRT only and not able to see the screen.
- Fixes the problem of being on LCD only, then suspending, and
resuming after docking to the C/Dock with a CRT attached and
the lid closed. Customer would be left unable to see the
display.
- Fixed Margi's DVD-to-go no longer showing video.
- Fixed 0E exception error while in ACPI mode.
VERSION A04 (05/29/98)
*******************************!!! IMPORTANT !!!********************************
- Special Note:
This driver requires the additional use of BIOS vA01 (or higher) to be
utilized on the Latitude CPi. Failure to comply may result in system
hangs. This BIOS requirement does not apply to the Latitude CP.
********************************************************************************
- Windows 98 multi-monitor support added.
- Margi Mpeg-2 card Suspend/Resume issue fixed.
- Fixed corruption with Lotus Notes icons.
- Fix for Running WinBench 98 Business Graphics Winmark get "A fatal
exception Error 0D".
- Fix for AVI display full screen corruption when move the mouse pointer to
the panning area in 1024x768x8-bit (256 colors) mode.
- Fixed the system palette not being correct when switching from LCD to CRT
while playing AVI files using Media Player in 640x480x8-bit (256 colors)
mode.
- Fixed Bottom of overlay running slow when playing some AVI using
ActiveMovie control.
- Fixed the Lotus Notes (4.51) clip mark icons corruption when coming back
from suspend/resume.
- Fixed Active Movie MPEG corruption upon resizing in 800x600x8-bit (256
colors) CRT mode.
VERSION A03 (02/24/98)
- Fix for bitmap images corruption.
- Fixed flash of video garbage on top of screen, when booting Windows 95.
- Fix for DOS box causing DOS error, (i.e. B: reference with to B: drive) and
hangs machine.
- Issue fixed when playing an ActiveMovie Mpeg in panning mode. Position
the video to the left most of the screen, then pan mouse to the right
so the video goes to the far left and is completely out of view. Now
switch to CRT mode, will see video blank out.
- Fixed issue of playing Indeo 4.1 avi clip, in default postion of any mode,
then clip it to the left side of the desktop, and you would see video
image shifting to the right side of video frame.
- Fix "version" problem in the version information dialog box.
- Fix the position of the "Advanced Settings" words.
- Fix the title in the version information dialog.
- Boot to 1024x768x16-bit color, then switch to CRT, while playing DOOM2 in
any full-screen mode corrupted game, this is now fixed.
- Drag Active Movie MPG clip on upper right side of desktop in 1024x768
panning mode. Minimize, then restore the video clip and will get video
out of video frame. This is now fixed.
- Fixed the problem with two radio buttons selected at the same time in the
Neomagic sheet.
- Fix the remaining dotted line on the LCD button.
- Fix for Win95 w/ IE4.0 or Win98 64k color modes shows corruption in icons.
- Message error and hang while running 2 display AVI files in 800x600x8-bit
(256 colors) mode is now fixed.
- Fixed the mouse cursor not able to switch between trails and not trails
after setup of Hardware acceleration in Properties Performance Graphic
screen.
- Fix short-cut key problems in Japanese mode.
- Fix the position problem with the CRT and LCD buttons in Japanese language.
- Fix for icon movement creating screen gabage. Japanese Windows 95 Active destop.
- Fixed the version information problem in Japanese language.
VERSION A02 (10/28/97)
- Fixes added to fix pallete corruption and bit blit hang problems.
VERSION A01 (08/21/97)
- Fixed MS Works 4.0, print preview showing garbage.
- Activate Plus screen saver "Travel" in any 8-bit modes will see corruption
when the air-plane fly across the screen is now fixed.
- Fixed the problem where continuously pressing ALT-ENTER would create garbage
on the screen in Full Screen.
VERSION A00 (02/02/98)
-Initial Release
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.