This file describes normal display driver installation procedures for
Windows 9x.
=============================================================================
Windows 95 Display Driver Installation Procedure
1. Click "Start", point to "Settings", and click "Control Panel".
2. Double-click the "Display" icon.
3. Click "Settings" [tab] and then click "Advanced Properties".
4. Select the "Adapter" tab and click "Change".
5. Click "Have Disk" and then click "OK".
6. Specify the path to the new driver in one of the following ways and then
press <ENTER>:
Example 1: Enter A:\.
Example 2: Type in the name of the directory to which you copied the
drivers, either on your local hard drive or on a network
share.
Example 3: If you're not sure exactly where the drivers are, choose
the "Browse..." button to find them.
7. At the "Select Device" dialog box, select the adapter that corresponds to
the one you installed on your system and click "OK".
8. Windows copies the drivers to the appropriate directories on your
system.
9. Continue clicking "Close" until you are prompted to restart the system.
10. Restart the system.
11. After you restart the system, you can return to the "Display" icon and
select alternate screen resolutions and color depths.
=============================================================================
Windows 98 Display Driver Installation Procedure
1. Click "Start", point to "Settings", and click "Control Panel".
2. Double-click the "Display" icon.
3. Click "Settings" [tab] and then click "Advanced" {button}.
4. Click the "Adapter" tab, and then click "Change".
The Update Device Driver Wizard appears and NeoMagic MagicGraph 128XD is
selected.
5. Click "Next", click "Search for a better driver than the one your device
is using now (Recommended)", and then click "Next".
The Update Device Wizards displays a message asking where to search for
the new driver.
6. Specify the path to the new driver in one of the following ways and then
press <ENTER>:
Example 1: If installing from the "Floppy drive", leave only the
Floppy drive box checked, all others should be unchecked.
Example 2: If installing from the hard drive, uncheck the "Floppy
drive" box, then check the "Specify a location" box,
click the "Browse" button. Type in the name of the
directory to which you copied the drivers, either on
your local hard drive or on a network share.
8. Click "Next" to select the driver in the directory selected above.
9. Select "Install one of the drivers", click on "View List".
10. Verify the driver called NeoMagic MagicGraph 128XD is highlighted and
click "OK".
11. Click "Next" to begin copying the files.
12. The following message is displayed: Please insert the disk labeled 'Win95
NeoMagic Driver Disk', click "OK".
13. If a Copying Files screen appears, click "Browse".
14. Select the same directory mentioned in step 6, and click "OK".
15. When prompted, click "Finish" to install the NeoMagic driver.
16. When prompted to reboot the computer, click "Yes".
17. After you restart the system, you can return to the "Display" icon and
select alternate screen resolutions and color depths.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.