************************************************************************
LevelOne FNC-0109TX Dec 2000
10/100Mbps Fast Ethernet Adapter
Version: 3.0
************************************************************************
NDIS/2 Driver for LAN Server
************************************************************************
The driver named RTSND contained in the directory \NDIS2 conform to the
Network Driver Interface Specification (NDIS) defined by Microsoft/3Com.
Contents of the file:
=====================
A) DOS LAN Requester Installation for LSP V1.30 to V1.37
B) LAN Server 4.0 DOS Client Installation
C) OS/2 LAN Server 3.0 Installation
D) OS/2 LAN Server 4.0 Installation
A) DOS LAN Requester Installation for LSP V1.30 to V1.37
======================================================
1. Insert the IBM LAN Support Program (LSP) Version 1.30 (or 1.31 to 1.37)
Diskette into your floppy drive (drive A: or B:).
2. Type the following at your DOS prompt and press <Enter>:
A:>dxmaid
3. The screen will display the IBM logo. Press <Enter> twice until
"Environment Information" appears onscreen.
4. Respond to the screen prompts, specifying the following values for each
field:
Use the <Space Bar> to toggle between choices:
Configuration for this computer? Yes
Use existing configuration information? Yes
Do you have adapter option diskettes? Yes
Are you configuring for two adapters? No
Do you need 802.2 interface support? No
Type changes as needed to the drive and directory information below:
Source for LSP A:\
Target for new configuration C:\lsp
5. Make sure that the values given above are correct. Press <Enter> to
store your choices.
6. Insert the Driver Diskette in your source drive. Specify the path and
press <Enter> to proceed. Examples:
A:\NDIS2\DOS or B:\NDIS2\DOS
7. Upon pressing <Enter> the necessary drives from the Driver Diskette are
copied onto you target directory in the hard disk.
8. Follow screen instructions to complete the process. Simply pressing
<Enter> for each screen display will select the default options. Press
<Enter> three times, until you reach the display prompting you to insert
the LSP diskette.
9. Insert the LSP diskette as prompted. Press <Enter> to acknowledge
completion of the action.
10. A screen showing the current configuration detected will be displayed.
It should show the PCI Fast Ethernet Adapter and the protocols
already selected (i.e., "IBM IEEE 802.2" and "IBM OS/2 NETBIOS").
11. Press <F4> to save the new configuration. This completes the LSP
installation.
************************************************************
* NOTE: *
* *
* You should have defined in your CONFIG.SYS a *
* minimum of 20 files, i.e., FILES=20, to run the *
* software properly. Change the FILES line using *
* a text editor if needed. *
* *
* If installing LSP for the first time, you should *
* complete the installation by typing install and *
* following the instructions on the screen. *
************************************************************
12. Use a text editor to edit the CONFIG.SYS file. Specify at least 20
files in the FILES= line. Modify it to the following:
FILES=20
13. Save the configuration and reset your computer.
14. Insert the DOS LAN Requester Install Diskette into your floppy drive.
15. Type the following and press <Enter>:
INSTALL <Enter>
16. The IBM logo will again appear on the screen. Press <Enter> to move on
to the next screen.
17. Follow screen instructions, pressing <Enter> to move from screen-to-
screen until you are prompted to indicate the pathname of the DOS LAN
Requester directory.
TIP: After the IBM logo appears on the screen,
press <Enter> twice to reach this screen.
18. Specify the pathname for the DOS LAN Requester directory (C:\DOSLAN is
the default). Then press <Enter> to continue.
19. The program will ask you for the services that you require.
20. Highlight the appropriate option. Select either "Send messages" or
"Send, View, Edit, and Log message" option.
TIP: Normally, second option "Send, View, Edit
and Log message" is selected.
21. Specify the PC's ID and domain ID. The domain ID is the domain server
ID; it should be the same for all workstations on the network.
22. Follow screen prompts to complete the installation.
B) LAN Server 4.0 DOS Client Installation
=======================================
1. Under the DOS environment, change the directory to the LAN Server DOS
Client subdirectory; that is, enter the following command
CD \NET
Note: \NET is the default directory name of the LAN Server 4.0 DOS
Client.
Note: Before installing the LAN driver, you should install the IBM LAN
Server DOS Client first.
2. Type INSTALL and press <Enter> to enter the DOS LAN installation program.
3. When the "Install for DOS LAN Services" screen appears, highlight
"the listed options are correct" choice and press <Enter>.
4. On the second screen, you will see the following information:
Machine ID, User name, Domain name, ... and Network card information.
Highlight the "Network card: No network card was selected" choice and
press <Enter>.
5. Select the first choice from the following two selections
"Add driver for network card",
"Driver configuration is correct".
6. Select "Network card not shown in list below ..." from a listing of
network adapters on the next screen.
7. Insert the PCI Fast Ethernet driver diskette into drive A: and
specify the path of driver installation file (OEMSETUP.INF) by typing
A:\NDIS2\DOS and press <Enter>.
8. Highlight "LevelOne 10/100Mbps Fast Ethernet Adapter" and press <Enter>.
9. If necessary, choose "Edit settings for network card driver", otherwise
choose "Driver configuration is correct".
Note: Please see NDIS.TXT for the parameter settings.
10. Highlight "The listed options are correct" and press <Enter> on the next
screen.
11. Then, the Installation Program will ask you to insert the DOS LAN
Services Disk 1. Be careful, do not follow the screen instruction here,
that is, you should not insert the DOS LAN Services Disk.
All you have to do is press <Enter> and wait for installation to complete.
12. Remove the diskette from driver A: and press <Enter> to restart the
machine.
C) OS/2 LAN Server 3.0 Installation
=================================
1. Copy RTSND.OS2 and RTSND.NIF files from your Driver diskette
(A:\NDIS2\OS2) to C:\IBMCOM\MACS.
2. Click the OS/2 LAN Service icon.
3. Select "Installation and configuration." The IBM logo should
appear on the screen.
4. Click <OK>.
5. Select <Advance> and press <Enter>.
6. Select "Install or Configure this Workstation."
7. Select server type, adding a server or domain controller.
The "install or remove" selections should appear.
8. Select "Configure a component."
9. Click the "Configure" button.
10. Select "Configure workstation."
11. Select "LevelOne 10/100Mbps Fast Ethernet Adapter" when prompted
to identify your Network Adapter, Then click the <Add> button.
12. Select "802.2" from the list and click the <Add> button.
13. Select IBM NETBIOS from the list and click the <Add> button.
14. Select <OK> to confirm all selections.
15. Follow screen instructions to complete the process, selecting <OK> to
accept default selections.
16. Continue pressing <OK> until your screen prompts you to backup the old
CONFIG.SYS and AUTOEXEC.BAT and create a new CONFIG.SYS and AUTOEXEC.BAT.
Also select <OK> to confirm this.
17. Installation is complete now. Reset your PC by turning it off and on.
D) OS/2 LAN Server 4.0 Installation
=================================
1. In OS2 desktop, click the MPTS (Multi-Protocol Transport Service)
icon. The IBM logo should appear on screen.
2. Click the <OK> button.
3. Click the <Configure> button.
4. Select the "LAN adapters and protocols" item, then click the <Configure>
button.
5. Click the <Other adapters...> button.
6. Insert the PCI Fast Ethernet Adapter driver diskette into
a specified drive (A: or B:), then enter the driver path like
A:\NDIS2\OS2 or B:\NDIS2\OS2
and click the <OK> button
7. Select "LevelOne 10/100Mbps Fast Ethernet Adapter" from the Network
Adapters list when prompted to identify you Network Adapter. Then
click the <Add> button.
8. Select "IBM 802.2" from the Protocols list and click the <Add> button.
9. Select "IBM OS2 NETBIOS" from the Protocols list and click the <Add>
button.
10. Select "IBM Netware Requester Support" from the Protocols list and
click the <Add> button if you need to log onto the NETWARE server.
11. Select <OK> to confirm all selections.
12. Click the <Close> button in the Configure window.
13. Click the <Exit> button in the MPTS window.
14. Click the <Exit> button, then your screen will prompt you to backup
the old CONFIG.SYS and AUTOEXEC.BAT, and create a new CONFIG.SYS
and AUTOEXEC.BAT. Also select <OK> to confirm this.
15. Installation is complete now. Reset your PC by turning it off and on.
----
All trademarks or brand names mentioned are properties
of their respective companies.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.