au10mult.inf Driver File Contents (AU8810w9x3000kor_loc.zip)

;*---------------------------------------------------------------------------
;*
;* $Workfile: au10mult.inf $
;*
;*---------------------------------------------------------------------------
;*
;* $Revision: 14 $  $Date: 3/19/99 2:34p $  
;*				
;*---------------------------------------------------------------------------
;*
;* Vortex inf file for multifunction device support
;*
;*---------------------------------------------------------------------------
;* 
;* Copyright (c) 1997 Aureal Semiconductor, Inc. - All rights reserved. 
;*
;* This is UNPUBLISHED PROPRIETARY SOURCE CODE of Aureal Semiconductor;
;* the contents of this file may not be disclosed to third parties, copied or
;* duplicated in any form, in whole or in part, without the prior written
;* permission of Aureal Semiconductor.
;*
;* RESTRICTED RIGHTS LEGEND:
;* Use, duplication or disclosure by the Government is subject to restrictions
;* as set forth in subdivision (c)(1)(ii) of the Rights in Technical Data
;* and Computer Software clause at DFARS 252.227-7013, and/or in similar or
;* successor clauses in the FAR, DOD or NASA FAR Supplement. Unpublished  -
;* rights reserved under the Copyright Laws of the United States.
;*
;*---------------------------------------------------------------------------
;*$NoKeywords: $

[Version]
LayoutFile=layout.inf
Signature="$CHICAGO$"
Class=MultiFunction
Provider=%Mfg%
Verinfo=%ProductVersion%
           
[ClassInstall]
Addreg=Class.AddReg

[Class.AddReg]
HKR,,,,%MFClassName%

[Manufacturer]
%Mfg%=AurealSemiconductor

[AurealSemiconductor]
%PCI\VEN_12EB&DEV_0003.DeviceDesc%=ASPEN_PARENT_DEVICE, PCI\VEN_12EB&DEV_0003&SUBSYS_000312EB

[ASPEN_PARENT_DEVICE]
AddReg=AspenParent.AddReg,AspenIniFile.AddReg,AspenCustomization.Addreg
CopyFiles=AspenINF.CopyList,AspenParent.CopyList,AspenSetup.CopyList,A3DDemos.CopyList
UpdateInis=Aspen.UpdateInis

[ASPEN_PARENT_DEVICE.HW]
AddReg=AspenParent.RegHW

[AspenParent.AddReg]
HKR,,DevLoader,,*CONFIGMG
HKR,,Enumerator,,*CONFIGMG
HKR,,CMDrivFlags,1,01,00,00,00		; CM_REGISTER_DEVICE_DRIVER_DISABLEABLE
HKR,,DeviceDriver,,au10init.vxd
;Motherboard implementations only
HKR,Config,EnableCMMON,1,1
HKLM,"Software\Aureal\CM Monitor","SearchSSID",00,%SearchString%
HKLM,"Software\Aureal\CM Monitor","TargetSSID",00,%TargetString%

[AspenIniFile.AddReg]
; Software Modem Detect
; set DWORD value to "1" to enable detection, 0 to disable.
HKLM, "Software\Aureal\Vortex\AU8810\InstallSettings","SwModemDetect",0x00010001,1,0,0,0

HKLM,Software,,,
HKLM,Software\Aureal,,,
HKLM,Software\Aureal\Modem,,,
HKLM,Software\Aureal\Vortex,,,
HKLM,Software\Aureal\Vortex\AU8810,,,
HKLM,Software\Aureal\Vortex\AU8810\IniFile,,,
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIniFilename,,"AU10DOS.INI"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni00,,"[AU10DOS.COM]"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni01,,"MPU401External=0"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni02,,"ModemBase=0x000"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni03,,"ModemIRQ=0x0"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni04,,"JoystickBase=0x000"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni05,,"MPU401Base=0x000"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni06,,"SBFMBase=0x000"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni07,,"FMBase=0x000"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni08,,"SBFMDMA=0x0"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni09,,"SBFMDMA2=0x0"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni10,,"SBFMIRQ=0x0"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni11,,"PCIIRQ=0x0"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni12,,"CPUSpeed=0x0000"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni13,,"Reserved2=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni14,,"Reserved1=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni15,,"mixer_master=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni16,,"mixer_phone=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni17,,"mixer_mic=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni18,,"mixer_line=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni19,,"mixer_cd=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni20,,"mixer_aux=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni21,,"Reserved4=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni22,,"Reserved3=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni23,,"Reserved2=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni24,,"Reserved1=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni25,,"string_prod=Vortex PCI Multifunction Platform"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni26,,"string_ven1=Aureal Semiconductor"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni27,,"string_ven2=(c)1997 Aureal Semiconductor, Inc. Fremont, CA"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni28,,"string_err1=Error: Run Windows 95 to set configuration"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni29,,"string_err2=Error: Could not find a PCI BIOS"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni30,,"string_err3=Error: Could not locate Vortex device"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni31,,"string_err4=Error: Could not enable Vortex system"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni32,,"string_err5=Error: An unexpected error has occurred"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni33,,"string_msg1=Sound Blaster support is enabled at port"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni34,,"string_msg2=Sound Blaster support is disabled"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni35,,"string_msg3=Joystick enabled at port"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni36,,"string_msg4=Joystick support is disabled"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni37,,"string_msg5=MPU401 MIDI system enabled at port"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni38,,"string_msg6=MPU401 MIDI system is disabled"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni39,,"string_msg7=Modem enabled at port"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni40,,"string_msg8=Modem is disabled"

[AspenParent.RegHW]
;HKR,Child0000,HardwareID,,MF\PCI_VEN_12EB&DEV_0003_AUDIO
;HKR,Child0000,ResourceMap,1,00,01,02,03 ; IRQ, IO0, IO1, IO2
;HKR,Child0000,MFFlags,1,0C,00,00,00     ; MF_FLAGS_FILL_IN_UNKNOWN_RESOURCE | MF_FLAGS_CREATE_BUT_NO_SHOW_DISABLED

[AspenCustomization.Addreg]
;; This setction contaions all registry keys used to disable the Vortex driver related features
;; or customize the functions provided by Vortex drivers/apps.

; DX5 install
;HKLM,"Software\Aureal\Vortex\AU8810\Customization","DisableDX5Install",0x00010001,1,0,0,0		;set DWORD value to "1" to disable prompting for DirectX5

[AspenINF.CopyList]
au10mult.inf,,
au10mmed.inf,,
au10comm.inf,,
au10port.inf,,

[Aspen.UpdateInis]
; Setting to prevent Matrox Millineum driver from hogging the PCI bus
system.ini,mga.drv,,"PCIChipSet=1",0

[AspenParent.CopyList]
;Motherboard implementations only
cmmon.vxd,,
au10init.vxd,,
au10loc.dll,,			; copy Aum42loc.dll to System directory
ASYCFILT.DLL,,,0x20		;2.30.4261
MSVCRT.DLL,,,0x20		;4.20.6164
OLEAUT32.DLL,,,0x20		;2.20.4054	register
OLEPRO32.DLL,,,0x20		;4.2.6068	register
STDOLE2.TLB,,,0x20		;2.20.4054

[AspenSetup.CopyList]
au10setp.exe,,
;a3dmovie.avi,,

[A3DDemos.CopyList]
_inst32i.ex_,,
_isdel.exe,,
_setup.dll,,
_sys1.cab,,
_user1.cab,,
Data.tag,,
data1.cab,,
lang.dat,,
layout.bin,,
os.dat,,
Setup.exe,,
Setup.ini,,
setup.ins,,
setup.iss,,
setup.lid,,

[SourceDisksFiles]
cmmon.vxd=42
au10init.vxd=42
au10mult.inf=42
au10mmed.inf=42
au10comm.inf=42
au10port.inf=42
au10setp.exe=42
au10loc.dll=42
ASYCFILT.DLL=42
MSVCRT.DLL=42
OLEAUT32.DLL=42
OLEPRO32.DLL=42
STDOLE2.TLB=42
;a3dmovie.avi=42
_inst32i.ex_=42,"..\..\A3DDemos"
_isdel.exe=42,"..\..\A3DDemos"
_setup.dll=42,"..\..\A3DDemos"
_sys1.cab=42,"..\..\A3DDemos"
_user1.cab=42,"..\..\A3DDemos"
Data.tag=42,"..\..\A3DDemos"
data1.cab=42,"..\..\A3DDemos"
lang.dat=42,"..\..\A3DDemos"
layout.bin=42,"..\..\A3DDemos"
os.dat=42,"..\..\A3DDemos"
Setup.exe=42,"..\..\A3DDemos"
Setup.ini=42,"..\..\A3DDemos"
setup.ins=42,"..\..\A3DDemos"
setup.iss=42,"..\..\A3DDemos"
setup.lid=42,"..\..\A3DDemos"

[SourceDisksNames]
42=%DiskName%,,0000-0000

[DestinationDirs]
DefaultDestDir = 11
AspenINF.CopyList = 17
AspenSetup.CopyList = 10
A3DDemos.CopyList = 30,xyzA3Dde

[Strings]
;Localized strings - standard Microsoft value
MFClassName="Multi-function adapters"

;Non-localized strings - device-specific
ProductVersion="0.01.00.0001"

;Localized strings - device-specific
Mfg="Aureal Semiconductor"
DiskName="Vortex AU8810 ¼³Ä¡ ¹× µå¶óÀ̹ö µð½ºÅ©"
PCI\VEN_12EB&DEV_0003.DeviceDesc="Vortex AU8810 ´Ù±â´É PCI Ç÷§Æû"
KEY_RUNONCE="Software\Microsoft\Windows\CurrentVersion\RunOnce"
KEY_OPT_COMPONENTS="SYSTEM\CurrentControlSet\Control\MediaResources\InstallOptionalComponents"
;Motherboard implementations only
SearchString="VEN_12EB&DEV_0001&SUBSYS_00000000"
TargetString="VEN_12EB&DEV_0001&SUBSYS_8036104D"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.72