;*---------------------------------------------------------------------------
;*
;* $Workfile: au10mult.inf $
;*
;*---------------------------------------------------------------------------
;*
;* $Revision: 14 $ $Date: 3/19/99 2:34p $
;*
;*---------------------------------------------------------------------------
;*
;* Vortex inf file for multifunction device support
;*
;*---------------------------------------------------------------------------
;*
;* Copyright (c) 1997 Aureal Semiconductor, Inc. - All rights reserved.
;*
;* This is UNPUBLISHED PROPRIETARY SOURCE CODE of Aureal Semiconductor;
;* the contents of this file may not be disclosed to third parties, copied or
;* duplicated in any form, in whole or in part, without the prior written
;* permission of Aureal Semiconductor.
;*
;* RESTRICTED RIGHTS LEGEND:
;* Use, duplication or disclosure by the Government is subject to restrictions
;* as set forth in subdivision (c)(1)(ii) of the Rights in Technical Data
;* and Computer Software clause at DFARS 252.227-7013, and/or in similar or
;* successor clauses in the FAR, DOD or NASA FAR Supplement. Unpublished -
;* rights reserved under the Copyright Laws of the United States.
;*
;*---------------------------------------------------------------------------
;*$NoKeywords: $
[Version]
LayoutFile=layout.inf
Signature="$CHICAGO$"
Class=MultiFunction
Provider=%Mfg%
Verinfo=%ProductVersion%
[ClassInstall]
Addreg=Class.AddReg
[Class.AddReg]
HKR,,,,%MFClassName%
[Manufacturer]
%Mfg%=AurealSemiconductor
[AurealSemiconductor]
%PCI\VEN_12EB&DEV_0003.DeviceDesc%=ASPEN_PARENT_DEVICE, PCI\VEN_12EB&DEV_0003&SUBSYS_000312EB
[ASPEN_PARENT_DEVICE]
AddReg=AspenParent.AddReg,AspenIniFile.AddReg,AspenCustomization.Addreg
CopyFiles=AspenINF.CopyList,AspenParent.CopyList,AspenSetup.CopyList,A3DDemos.CopyList
UpdateInis=Aspen.UpdateInis
[ASPEN_PARENT_DEVICE.HW]
AddReg=AspenParent.RegHW
[AspenParent.AddReg]
HKR,,DevLoader,,*CONFIGMG
HKR,,Enumerator,,*CONFIGMG
HKR,,CMDrivFlags,1,01,00,00,00 ; CM_REGISTER_DEVICE_DRIVER_DISABLEABLE
HKR,,DeviceDriver,,au10init.vxd
;Motherboard implementations only
HKR,Config,EnableCMMON,1,1
HKLM,"Software\Aureal\CM Monitor","SearchSSID",00,%SearchString%
HKLM,"Software\Aureal\CM Monitor","TargetSSID",00,%TargetString%
[AspenIniFile.AddReg]
; Software Modem Detect
; set DWORD value to "1" to enable detection, 0 to disable.
HKLM, "Software\Aureal\Vortex\AU8810\InstallSettings","SwModemDetect",0x00010001,1,0,0,0
HKLM,Software,,,
HKLM,Software\Aureal,,,
HKLM,Software\Aureal\Modem,,,
HKLM,Software\Aureal\Vortex,,,
HKLM,Software\Aureal\Vortex\AU8810,,,
HKLM,Software\Aureal\Vortex\AU8810\IniFile,,,
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIniFilename,,"AU10DOS.INI"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni00,,"[AU10DOS.COM]"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni01,,"MPU401External=0"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni02,,"ModemBase=0x000"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni03,,"ModemIRQ=0x0"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni04,,"JoystickBase=0x000"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni05,,"MPU401Base=0x000"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni06,,"SBFMBase=0x000"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni07,,"FMBase=0x000"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni08,,"SBFMDMA=0x0"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni09,,"SBFMDMA2=0x0"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni10,,"SBFMIRQ=0x0"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni11,,"PCIIRQ=0x0"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni12,,"CPUSpeed=0x0000"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni13,,"Reserved2=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni14,,"Reserved1=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni15,,"mixer_master=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni16,,"mixer_phone=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni17,,"mixer_mic=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni18,,"mixer_line=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni19,,"mixer_cd=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni20,,"mixer_aux=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni21,,"Reserved4=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni22,,"Reserved3=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni23,,"Reserved2=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni24,,"Reserved1=0x00"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni25,,"string_prod=Vortex PCI Multifunction Platform"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni26,,"string_ven1=Aureal Semiconductor"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni27,,"string_ven2=(c)1997 Aureal Semiconductor, Inc. Fremont, CA"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni28,,"string_err1=Error: Run Windows 95 to set configuration"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni29,,"string_err2=Error: Could not find a PCI BIOS"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni30,,"string_err3=Error: Could not locate Vortex device"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni31,,"string_err4=Error: Could not enable Vortex system"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni32,,"string_err5=Error: An unexpected error has occurred"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni33,,"string_msg1=Sound Blaster support is enabled at port"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni34,,"string_msg2=Sound Blaster support is disabled"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni35,,"string_msg3=Joystick enabled at port"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni36,,"string_msg4=Joystick support is disabled"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni37,,"string_msg5=MPU401 MIDI system enabled at port"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni38,,"string_msg6=MPU401 MIDI system is disabled"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni39,,"string_msg7=Modem enabled at port"
HKLM,Software\Aureal\Vortex\AU8810\IniFile,VortexIni40,,"string_msg8=Modem is disabled"
[AspenParent.RegHW]
;HKR,Child0000,HardwareID,,MF\PCI_VEN_12EB&DEV_0003_AUDIO
;HKR,Child0000,ResourceMap,1,00,01,02,03 ; IRQ, IO0, IO1, IO2
;HKR,Child0000,MFFlags,1,0C,00,00,00 ; MF_FLAGS_FILL_IN_UNKNOWN_RESOURCE | MF_FLAGS_CREATE_BUT_NO_SHOW_DISABLED
[AspenCustomization.Addreg]
;; This setction contaions all registry keys used to disable the Vortex driver related features
;; or customize the functions provided by Vortex drivers/apps.
; DX5 install
;HKLM,"Software\Aureal\Vortex\AU8810\Customization","DisableDX5Install",0x00010001,1,0,0,0 ;set DWORD value to "1" to disable prompting for DirectX5
[AspenINF.CopyList]
au10mult.inf,,
au10mmed.inf,,
au10comm.inf,,
au10port.inf,,
[Aspen.UpdateInis]
; Setting to prevent Matrox Millineum driver from hogging the PCI bus
system.ini,mga.drv,,"PCIChipSet=1",0
[AspenParent.CopyList]
;Motherboard implementations only
cmmon.vxd,,
au10init.vxd,,
au10loc.dll,, ; copy Aum42loc.dll to System directory
ASYCFILT.DLL,,,0x20 ;2.30.4261
MSVCRT.DLL,,,0x20 ;4.20.6164
OLEAUT32.DLL,,,0x20 ;2.20.4054 register
OLEPRO32.DLL,,,0x20 ;4.2.6068 register
STDOLE2.TLB,,,0x20 ;2.20.4054
[AspenSetup.CopyList]
au10setp.exe,,
;a3dmovie.avi,,
[A3DDemos.CopyList]
_inst32i.ex_,,
_isdel.exe,,
_setup.dll,,
_sys1.cab,,
_user1.cab,,
Data.tag,,
data1.cab,,
lang.dat,,
layout.bin,,
os.dat,,
Setup.exe,,
Setup.ini,,
setup.ins,,
setup.iss,,
setup.lid,,
[SourceDisksFiles]
cmmon.vxd=42
au10init.vxd=42
au10mult.inf=42
au10mmed.inf=42
au10comm.inf=42
au10port.inf=42
au10setp.exe=42
au10loc.dll=42
ASYCFILT.DLL=42
MSVCRT.DLL=42
OLEAUT32.DLL=42
OLEPRO32.DLL=42
STDOLE2.TLB=42
;a3dmovie.avi=42
_inst32i.ex_=42,"..\..\A3DDemos"
_isdel.exe=42,"..\..\A3DDemos"
_setup.dll=42,"..\..\A3DDemos"
_sys1.cab=42,"..\..\A3DDemos"
_user1.cab=42,"..\..\A3DDemos"
Data.tag=42,"..\..\A3DDemos"
data1.cab=42,"..\..\A3DDemos"
lang.dat=42,"..\..\A3DDemos"
layout.bin=42,"..\..\A3DDemos"
os.dat=42,"..\..\A3DDemos"
Setup.exe=42,"..\..\A3DDemos"
Setup.ini=42,"..\..\A3DDemos"
setup.ins=42,"..\..\A3DDemos"
setup.iss=42,"..\..\A3DDemos"
setup.lid=42,"..\..\A3DDemos"
[SourceDisksNames]
42=%DiskName%,,0000-0000
[DestinationDirs]
DefaultDestDir = 11
AspenINF.CopyList = 17
AspenSetup.CopyList = 10
A3DDemos.CopyList = 30,xyzA3Dde
[Strings]
;Localized strings - standard Microsoft value
MFClassName="Multi-function adapters"
;Non-localized strings - device-specific
ProductVersion="0.01.00.0001"
;Localized strings - device-specific
Mfg="Aureal Semiconductor"
DiskName="Vortex AU8810 - Installations- und Treiberdiskette"
PCI\VEN_12EB&DEV_0003.DeviceDesc="Vortex AU8810 Multifunction PCI Platform"
KEY_RUNONCE="Software\Microsoft\Windows\CurrentVersion\RunOnce"
KEY_OPT_COMPONENTS="SYSTEM\CurrentControlSet\Control\MediaResources\InstallOptionalComponents"
;Motherboard implementations only
SearchString="VEN_12EB&DEV_0001&SUBSYS_00000000"
TargetString="VEN_12EB&DEV_0001&SUBSYS_8036104D"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.