ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ PLANET ENW-9501 Plus ³
³ Installation for Windows for Workgroups 3.1 ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
A. Software Requirements:
o MS-DOS 5.0 or later with
Microsoft Windows for Workgroups Versions 3.1.
B. Installation with Microsoft Windows for Workgroups Version 3.1
a. Automatic installation using the Network Setup Program
a) Select the Control Panel icon.
b) Select the Network Program.
c) Select <Adapter> option.
d) Select <Remove> to remove the old adapter.
e) Select <Add> to add the DC21X4-based adapter
f) Select <Unlisted or Updated Network Adapter> and follow
the Windows for Workgroups instructions, installing the
driver from A:\NDIS2.
b. Manual Installation for Windows for Workgroups 3.1
If you do not wish to use network installation program
'Network' from the Control Panel icon, you have to perform
the following steps manually:
a) Copy the DC21X4.DOS file from this kit to the Windows
directory:
<DRIVE>:\WINDOWS
b) Add the following line to CONFIG.SYS
DEVICE=<DRIVE>:\WINDOWS\DC21X4.DOS
c) Modify your PROTOCOL.INI file using any DOS Editor by
appending the PROTOCOL.INI stub (included with this kit)
to the end of your old PROTOCOL.INI file. The stub
contains the following information:
[DC21X4]
DRIVERNAME=DC21X4$
d) Modify the NETWORK.SETUP and MS$NETBEUI sections of your
PROTOCOL.INI file as follows:
[network.setup]
version=0x3100
netcard=DC21X4,1,DC21X4
transport=ms$netbeui,MS$NETBEUI
lana0=DC21X4,1,ms$netbeui
[MS$NETBEUI]
DriverName=netbeui$
SESSIONS=6
NCBS=12
BINDINGS=DC21X4
LANABASE=0
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.