1. ENW9501P.ZIP Driver
2. LANMOS2.TXT File Contents

LANMOS2.TXT Driver File Contents (ENW9501P.ZIP)

   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
   ³                         PLANET ENW-9501 Plus                           ³
   ³                   Installation for OS/2 LAN Manager                    ³
   ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

   A. Software Requirements:

         o OS/2 V1.3, V2.x or V3.0 (WARP) with

            o Lan Manager Versions 1.3 or 2.x .


   B. Installation with Microsoft LAN Manager 2.x for OS/2

      a. Automatic installation using the LAN Manager Setup Program:

         a) In the \LANMAN directory, start the SETUP program

         b) Select <Configuration> from the Main Menu.

         c) Select <Network Driver> from the Configuration Menu.

         d) Remove the old adapter using <Remove Configuration>.

         e) Select <Add Configuration>.

         f) Select <Other Drivers> and follow the directions.


      b. Manual Installation for OS/2 LAN Manager

         If LAN Manager is already installed and configured and you do
         not wish to use the setup program, perform the following
         manual steps:

         a) Create DC21X4 Driver directory

            <DRIVE>:\LANMAN\DRIVERS\ETHERNET\DC21X4.

         b) Copy the files

            \MSLANMAN.OS\DRIVERS\ETHERNET\DC21X4\DC21X4.OS

            and

            \MSLANMAN.OS\DRIVERS\ETHERNET\DC21X4\PROTOCOL.INI

             to the new directory.

         c) Copy the file

            \MSLANMAN.OS\DRIVERS\NIF\DC21X4.NIF

            to the directory

            <DRIVE>:\LANMAN\DRIVERS\NIF.

         d) Add the following line to your CONFIG.SYS to load the
            driver:

            DEVICE=<DRIVE>:\LANMAN\DRIVERS\ETHERNET\DC21X4\DC21X4.OS2.

         e) Modify your PROTOCOL.INI file using any OS/2 Editor by
            appending the PROTOCOL.INI stub (included with this kit) to
            the end of your old PROTOCOL.INI file.  The stub contains
            the following information:

                 [DC21X4_NIF]
                 DRIVERNAME=DC21X4$

         f) Modify TCPIP_XIF & NETBEUI_XIF modules in the PROTOCOL.INI
            file by changing the value of the BINDINGS keyword

               from  BINDINGS = driverlabel
               to    BINDINGS = DC21X4_NIF

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.