ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ PLANET ENW-9501 Plus ³
³ Installation for DOS LAN Manager ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
A. Software Requirements:
o MS-DOS 5.0 or later with
o Microsoft LAN Manager Versions 1.3 or 2.x .
B. Installation with Microsoft LAN Manager 2.x
a. Automatic installation using the LAN Manager Setup Program:
a) Start the LMSETUP program.
b) Select <Configuration> from the Main Menu.
c) Select <Network Driver> from the Configuration Menu.
d) Remove the old adapter using <Remove Configuration>.
e) Select <Add Configuration>.
f) Select <Other Drivers> and follow the directions.
b. Manual Installation for DOS LAN Manager
If LAN Manager is already installed and configured and you do
not wish to use the installation program, you have to perform
the following steps manually:
a) Create DC21X4 Driver directory
<DRIVE>:\LANMAN.DOS\DRIVERS\ETHERNET\DC21X4
b) Copy the files
\MSLANMAN.DOS\DRIVERS\ETHERNET\DC21X4\DC21X4.DOS
and
\MSLANMAN.DOS\DRIVERS\ETHERNET\DC21X4\PROTOCOL.INI
to the new directory.
c) Copy the file
\MSLANMAN.DOS\DRIVERS\ETHERNET\DC21X4\DC21X4.NIF
to the directory
<DRIVE>:\LANMAN.DOS\DRIVERS\NIF
d) Add the following line to your CONFIG.SYS to load the
driver:
DEVICE=<drv>:\LANMAN.DOS\DRIVERS\ETHERNET\DC21X4\DC21X4.DOS
e) Modify your PROTOCOL.INI file using any DOS Editor by
appending the PROTOCOL.INI stub (included with this kit) to
the end of your old PROTOCOL.INI file. The stub contains
the following information:
[DC21X4_NIF]
DRIVERNAME=DC21X4$
f) Modify TCPIP_XIF & NETBEUI_XIF modules in the PROTOCOL.INI
file by changing the value of the BINDINGS keyword
from BINDINGS = driverlabel
to BINDINGS = DC21X4_NIF
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.