ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ PLANET ENW-9501 Plus ³
³ Installation for Windows NT 3.5 ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
A. Installing the DC21X4 Driver on Windows NT:
1. From the Windows NT Main Menu, select the Control Panel icon.
2. From the Control Panel menu select the Network icon.
If a dialog box asks you "Do you want to install NT
Network?" select YES and Continue. Then place
the Windows NT CDROM in the CD-ROM reader.
Select the drive that matches the configuration of your system
and complete the install.
3. You will see several messages. To add a network adapter, select Yes
and then Continue
4. For each additional message, select continue.
5. From the Add Network Adapter dialog box, scroll through the menu to
select Other.
6. When the Insert Diskettes menu prompts you for a disk, insert the
DC21X4 driver installation diskette for Windows NT into drive A.
Then select OK.
7. Select your option
[Digital Semiconductor 21040 based Ethernet Controller]
[Digital Semiconductor 21041 based Ethernet Controller]
[Digital Semiconductor 21140 based 10/100 mbps Ethernet Controller]
[Digital Semiconductor 21142 based 10/100 mbps Ethernet Controller]
[Digital Semiconductor 21143 based 10/100 mbps Ethernet Controller]
[Digital Semiconductor EB40 21040 based Evaluation Board]
[Digital Semiconductor EB41 21041 based Evaluation Board]
[Digital Semiconductor EB140 21140 based Evaluation Board]
[Digital Semiconductor EB142 21142 based Evaluation Board]
[Digital Semiconductor EB143 21143 based Evaluation Board]
from the Select OEM Option box, then select OK.
8. Modify the default distribution path in the Windows NT
Setup box to point to the correct drive and path, then click
on [Continue]
9. For PCI options, a Dialog box pops up to select the:
ConnectionType:
-------------------------------------------------------------------
Digital Semiconductor's DC21140\DC21140A
-------------------------------------------------------------------
o AutoSense Senses dynamically the media ports
o 10BaseT (TP)
o 10BaseT (TP) Full Duplex To connect to Full Duplex hubs
o 10Base2 (BNC) BNC connector
o 10Base5 (AUI) 15_pin connector
o 100BaseTx To connect 100BaseTx Ethernet hubs
o 100BaseTx Full Duplex To connect 100BaseTx Full Duplex
hubs
10. Upon completion, the selected adapter is added to the
Installed Adapter Cards list of the Network Setting box
(the number prefixing the adapter is the adapter number).
11. Click on [Close] to complete the Network Setting
initialization.
12. If needed, modify the values in the registry (see section 7 below).
13. Shutdown and reboot the system.
B. Parameters
To overwrite the initial values set by the EISA Configuration
Utility (ECU) overwrite the driver's default values,
add or edit the following values in the Registry
DC21x4_<adapter_number> Parameters subtree:
CacheLineSize = REG_DWORD { 16 | 32 | 64 | 128 }
16 bytes
32 bytes (default)
64 bytes
128 bytes
MapRegisters = REG_DWORD {4,8,16} (default: 16(alpha) | 8)
Number of map registers allocated
by the adapter.
MemoryReadMultiple = REG_DWORD { 0 | 1 } (21142,21143 only)
0 Disabled (default)
1 Enabled
Enable/disable PCI Memory_Read_Multiple command.
MRM should be enabled when the DC21X4 is connected
to the TI1130 PCI/CardBus bridge.
ReceiveBuffers = REG_DWORD {8..64} (default: 16)
Number of buffers allocated by the
driver in the Receive ring.
SoftwareCRC = REG_DWORD { 0 | 1 } (DC21040 rev 1.x, 2.0 & 2.2 only)
0 The CRC is generated by the adapter
1 (default) The CRC is generated by software for
transmit packets bigger than the transmit threshold.
NOTE: This option affects performances and could be
disabled if the adapter does not report transmit
underruns in its statistic counters
UnderrunThreshold = REG_DWORD number_of_underruns (default=10)
(21140 and 21143/2 only)
Maximun number of underrun occurences before the
controller switches to the next threshold value.
The following values allow to overwrite the DC21X4 default setting.
Digital Semiconductor 2104x/2114x 10/100 mbps Ethernet Controller
Engineering specifications for detailled description:
BackPressure = REG_DWORD { 0 | 1 } (not 21040 rev1)
CSR6<BP> 0 Disabed (default)
1 Enabled
BurstLength = REG_DWORD { 0 | 1 | 2 | 4 | 8 | 16 | 32 }
CSR0<PBL> 0 unlimited (default) - (not 21040,
21041 & 21140 rev1)
1 doubleword
2 doublewords
4 doublewords
8 doublewords
16 doublewords (default for 21040, 21041
& 21140 rev1)
32 doublewords (not 21040 & 21041)
CaptureEffect = REG_DWORD { 0 | 1 } (not 21040 rev1)
CSR6<CA> 0 Disabed (Default)
1 Enabled
FifoArbitration = REG_DWORD { 0 | 1 }
CSR0<BAR> 0 Rcv/Txm Arbitration (default)
1 Round_Robin
SnoozeMode = REG_DWORD { 0 | 1 }
CFDA<SM> 0 Disabled (default)
1 Enabled
StopBackoffCounter = REG_DWORD { 0 | 1 } (not 21040 rev1)
CSR6<SB> 0 Disabed (Default)
1 Enabled
StoreAndForward = REG_DWORD { 0 | 1 } (21140, 21143/2 only)
Select the StoreAndForward mode if high
PCI latencies causes 100Mbps Transmit Underruns
CSR6<SF> 1 Enabled
0 Disabled (default)
TransmitThreshold = REG_DWORD { 72 | 96 | 128 | 160 }
Transmit Threshold value for the 10Mbps media.
CSR6<TTM,TR> 72 bytes
96 bytes (default)
128 bytes
160 bytes
TransmitThreshold100 = REG_DWORD { 128 | 256 | 512 | 1024}
Transmit Threshold value for the 100Mbps media.
Meaningless when StoreAndForward is set
CSR6<TTM,TR> 128 bytes
256 bytes
512 bytes (default)
1024 bytes
These Registry values can be edited interactively through the Registry
editor (winnt\system32\regedt32.exe) or by invoking the regini command
Edit an DC21X4.ini file as described below, then invoke the command:
regini DC21X4.ini
DC21X4.ini format:
\Registry\Machine
System
CurrentControlSet
Services
dc21x4_{adapter_number}
Parameters
{valuename} = {type}{value}
C. Error messages
The error messages are logged in the Entry Log and can be seen using
the Entry Log Viewer (in WNT's Administration Tools group).
Each error message has a standard Ndis error code and an driver's
additional code. The additional codes are:
DC21X4_ERRMSG_REGISTRY 0x01
DC21X4_ERRMSG_ALLOC_MEMORY 0x02
DC21X4_ERRMSG_SROM 0x03
DC21X4_ERRMSG_MEDIA 0x04
DC21X4_ERRMSG_LOAD_CAM 0x05
DC21X4_ERRMSG_SYSTEM_ERROR 0x06
DC21X4_ERRMSG_TXM_JABBER_TIMEOUT 0x07
1. Driver initialization errors:
o NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION
DC21X4_ERRMSG_REGISTRY
The AdapterType Registry's key is missing or its value is
unsupported by the adapter board
o NDIS_ERROR_CODE_ADAPTER_NOT_FOUND
No board matching the AdapterCFID Registry's key value was found
plugged into the PCI bus or in the slot specified in the Registry
o NDIS_ERROR_CODE_OUT_OF_RESOURCES
DC21X4_ERRMSG_ALLOC_MEMORY
Not enough memory to allocate space for the Adapter data block
o NDIS_ERROR_CODE_INVALID_VALUE_FROM_ADAPTER
DC21X4_ERRMSG_SROM
Invalid data read from the adapter's serial ROM
o NDIS_ERROR_CODE_NETWORK_ADDRESS
No readable burnt_in or software configured station address
o NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION
DC21X4_ERRMSG_MEDIA
The selected media port is not supported by the board.
o NDIS_ERROR_CODE_INTERRUPT_CONNECT
Interrupt initialization failed
o NDIS_ERROR_CODE_TIMEOUT
DC21X4_ERRMSG_LOAD_CAM
DC21X4 CAM initialization failed
2. Driver run time errors:
o NDIS_ERROR_CODE_HARDWARE_FAILURE
DC21X4_ERRMSG_SYSTEM_ERROR
System_Error interrupt (bus parity error)
o NDIS_ERROR_CODE_HARDWARE_FAILURE
DC21X4_ERRMSG_TXM_JABBER_TIMEOUT
Transmit Jabber timer expired
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.