1. 3501V1.ZIP Driver
2. PCTCP.TXT File Contents

PCTCP.TXT Driver File Contents (3501V1.ZIP)

================================================================
NOTES ON
Installing PLANET ENW-3501 Ethernet PC Card
For FTP PC/TCP Users
================================================================
    (c) 1997 Copyright PLANET ALL RIGHTS RESERVED



This document contains installation notes, which is not included in the
ENW-3501 Ethernet PC Card USER'S GUIDE or onscreen instructions,
for FTP PC/TCP users regarding ENW-3501 PC Card installation.



This document contains information on the following topics:

1.0 Introduction
2.0 Installation Notes
___________________________________________________________________


1.0 Introduction
--------------------

Packet drivers users please also refer to the following:
    -------------------------------------------------------------------
     File                     Description/Installation notes
    -------------------------------------------------------------------
    README.TXT                For all users
    \PKTDRV\README.TXT        For all Packet driver  users


 2.0 Installation Notes
---------------------------

     Two methods available:
     Method 1
     First, in your CONFIG.SYS file, include the ENW35 command.

                                 Format:
             DEVICE = ENW35.SYS [/option] <packet_int_no>

             <packet_int_no> is the software interrupt vector number used
                            by the packet driver program. This can be
                            from 96 to 128.

            /d             Delay Initial - The driver program will not
                           initialize the network interface card until
                           the packet driver program is accessed by its
                           upper layer program.

            /w             The -w parameter is for use only in the
                           Windows environment.

     Please refer to  the \PKTDRV\README.TXT file and INST_DOS.TXT file
     on DISK 1 for more information.

     Method 2

     Issue ENW35 command at the DOS command prompt.

       Format:

            ENW35 [/option] <packet_int_no>

             <packet_int_no> is the software interrupt vector number used
                             by the packet driver program. This can be
                             from 96 to 128.

             /d             Delay Initial - The driver program will not
                            initialize the network interface card until
                            the packet driver program is accessed by its
                            upper layer program.

             /w             The -w parameter is for use only in the
                            Windows environment.

     Please refer to the INST_DOS.TXT file on DISK for more parameters.


     Run the ETHDRV.EXE and IDRIVE.EXE device driver programs.
     These programs are provided by FTP.

     FTP's PC/TCP and associated programs are ready to used.



How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.