1. 3501V1.ZIP Driver
2. NCSA.TXT File Contents

NCSA.TXT Driver File Contents (3501V1.ZIP)

==================================================================
NOTES ON
Installing PLANET ENW-3501 Ethernet PC Card
For NCSA Users
==================================================================
    (c) 1997 Copyright PLANET ALL RIGHTS RESERVED



This document contains installation notes, which is not included in the
ENW-3501 Ethernet PC Card USER'S GUIDE or onscreen instructions,
for NCSA users regarding ENW-3501 PC Card installation.


This document contains information on the following topics:

1.0 Introduction
2.0 Installing Pcaket driver
___________________________________________________________________



1.0 Introduction
----------------

Packet drivers users please also refer to the following:

    -------------------------------------------------------------------
     File                  Description/Installation notes
    -------------------------------------------------------------------
     README.TXT            For all users
     \PKTDRV\README.TXT    For all Packet driver users



2.0   Installing Pcaket driver
------------------------------

    Here are the steps:

    Step  1:
    To load a driver , use either of the following methods:

         METHOD 1:
               In your CONFIG.SYS file, include the DEVICE command.

               Format:
               DEVICE = ENW35.SYS [/option] <packet_int_no>


        METHOD 2:
               Issue ENW35 command at the DOS command prompt.

               Format:
               ENW35.COM [/option] <packet_int_no>


    Step  2:

    First, you need to install NCSA TCP/IP distributions into your
    computer. (Also refer to NCSA TCP/IP distributions \INSTALL for more
     information.)

    Then, please set correct values in CONFIG.TEL which is
    included in NCSA TCP/IP distributions as follows:

        CONFIG.TEL
        ----------
            :
            :
        hardware    = packet
        ioaddr      = <iobase>
        interrupt   = <irq>
            :
            :

        Please take note the above settings must be the same as
        driver's parameters.

    Now, the NCSA TCP/IP associated programs are ready to be used.



    Example:
    --------

    > ENW35.COM 0x62
    > EDIT CONFIG.TEL
                :
         hardware     = packet
         ioaddr       = <iobase>
         interrupt    = <irq>
                :
    > TELNET <IP_ADDRESS>




How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.