==================================================================
NOTES ON
Installing PLANET ENW-3501 Ethernet PC Card
For NetWare Server V4.0 or Later Users
==================================================================
(c) 1997 Copyright PLANET ALL RIGHTS RESERVED
This document contains ENW-3501 Ethernet PC Card installation notes,
which is not included in the ENW-3501 Ethernet PC Card USER'S GUIDE
or onscreen instructions, for NetWare Server V4.0 or later users.
This document contains information on the following topics:
1.0 Overview
2.0 Installation Notes
2.1 First time installation from the installation menu
2.2 Reinstallation from the installation menu
2.3 Modifying an existing NetWare 4.x Server
___________________________________________________________________
1.0 Overview
--------------
Please also refer to the INST_DOS.TXT file on the driver diskette.
2.0 Installation Notes
------------------------
******************************************************************
* Notes: The PC Card should be enabled by Card service. *
* Please run DSCD.EXE before starting the server. *
* *
* Content of CONFIG.SYS *
* --------------------- *
* Add below item to the CONFIG.SYS file *
* *
* DEVICE=<PATH>\DSCD.EXE /iop=300 /irq=11 *
* ; <PATH> is a directory include DSCD.EXE file . *
* ; Please refer to the INST_DOS.TXT for details. *
******************************************************************
2.1 First time installation from the installation menu
--------------------------------------------------------
(for NetWare Server V4.1 only, for other version see below)
1. Proceed with the following steps:
Start the NetWare Server.
> CD \NWSERVER
> SERVER
2. Execute "LOAD INSTALL" after booting up by typing
: LOAD INSTALL
3. Select "Driver Options", -> "Configure network drivers", and
-> "Select a driver."
4. Press <Insert> key to install an unlisted driver.
5. Please insert release driver diskette into the disk drive.
6. Press <F3> to specify a different <PATH>. <PATH> is directory
which includes both ENW35.LAN and ENW35.LDI
Example: A:\NETWARE\32BITLAN
7. Select "ENW35.LAN ....".
8. Specify "Port value", and "Interrupt number". Please refer to
the diagnostic program.
9. Select "Save parameters and load driver" after configuring the
adapter setting.
10. The NetWare server will be loading/binding the driver
automatically.
2.2 Reinstallation from the installation menu
-----------------------------------------------
(for NetWare 4.1x only, for other version see below)
1. Proceed with the following steps:
Start the NetWare Server.
> CD \NWSERVER
> SERVER
2. Execute "LOAD INSTALL" after booting up by typing
:LOAD INSTALL
3. Select "Driver Options", -> "Configure network drivers", and
-> "Select a driver".
4. Select "ENW35.LAN ...." in Select a driver windows.
5. Specify "Port value", and "Interrupt number". Please refer
to the diagnostic program.
6. Select "Save parameters and load driver" after configuring
the adapter setting.
7. NetWare server will be loading/binding the driver
automatically.
2.3 Modifying an existing NetWare 4.x Server
---------------------------------------------
1. Proceed with the following steps:
Make a sub-directory NLMS.OLD under NWSERVER directory.
Example: >MD \NWSERVER\NLMs.OLD
2. Save NBI.NLM, MSM.NLM and ETHERTSM.NLM to NLMS.OLD
sub-directory.
3. Please insert release driver diskette into the disk drive.
4. Copy all provided NLM and LAN files into your DOS directory
which will include the SERVER.EXE file.
>COPY <PATH>\*.* C:\NWSERVER
Example: >COPY A:\NETWARE\32BITLAN\ENW35.LAN C:\NWSERVER
>COPY A:\NETWARE\32BITLAN\ENW35.LDI C:\NWSERVER
>COPY A:\NETWARE\32BITLAN\NBI.NLM C:\NWSERVER
>COPY A:\NETWARE\32BITLAN\MSM.NLM C:\NWSERVER
>COPY A:\NETWARE\32BITLAN\ETHERTSM.NLM C:\NWSERVER
<PATH> here is the directory where the support NLMs and
ENW35.LAN reside.
5. Start the NetWare Server.
> CD \NWSERVER
> SERVER
6. From the Novell Server side, execute "LOAD INSTALL" by typing
:LOAD INSTALL
Select <NCF files options>
Select <Edit AUTOEXEC.NCF file>
7. Add the item below into the server's AUTOEXEC.NCF file.
LOAD C:\NWSERVER\NBI.NLM
LOAD C:\NWSERVER\MSM.NLM
LOAD C:\NWSERVER\ETHERTSM.NLM
LOAD C:\NWSERVER\ENW35 PORT=300 INT=B FRAME=Ethernet_802.3
NAME=ENW35_1_E83
BIND IPX ENW35_1_E83 NET=xxxx
LOAD C:\NWSERVER\ENW35 PORT=300 INT=B FRAME=Ethernet_802.2
NAME=ENW35_1_E82
BIND IPX ENW35_1_E82 NET=xxxx
LOAD C:\NWSERVER\ENW35 PORT=300 INT=B FRAME=Ethernet_II
NAME=ENW35_1_EII
BIND IPX ENW35_1_EII NET=xxxx
LOAD C:\NWSERVER\ENW35 PORT=300 INT=B FRAME=Ethernet_SNAP
NAME=ENW35_1_ESP
BIND IPX ENW35_1_ESP NET=xxxx
8. Restart the server.
******************************************************************
* Notes: The PC Card should be enabled by Card service. *
* Please run the DSCD.EXE file before starting the server. *
* *
* > DSCD /iop=300 /irq=11 *
******************************************************************
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.