==================================================================
NOTES ON
Installing PLANET ENW-3501 Ethernet PC Card
For Lan Support/Services Users
==================================================================
(c) 1997 Copyright PLANET ALL RIGHTS RESERVED
This document contains ENW-3501 Ethernet PC Card installation notes,
which is not included in the ENW-3501 Ethernet PC Card USER'S GUIDE
or onscreen instructions, for Lan Support/Services users.
This document contains information on the following topics:
1.0 Overview
2.0 Installation Notes For Lan Support users
3.0 Installation Notes For Lan Services 4.x
___________________________________________________________________
1.0 Overview
------------
Lan Support/Services users please also refer to the following:
-------------------------------------------------------------------
File Description/Installation notes
--------------------------------------------------------------------
INST_DOS.TXT Overall installation notes for DOS users,
including users of Windows 3.1/3.11.
\NDIS\README.TXT Overall installation notes for all NDIS users
2.0 Installation Notes
------------------------
There are two Installation methods available to install ENW-3501
drivers for Lan Support users:
2.1 Method 1
Use the .NIF file:
1. Insert the LAN Support diskette in Drive A.
2. Run DXMAID which is the install program.
For example:
A:\> DXMAID [Enter]
The following message then appears:
"Do you have driver diskettes?" [Yes]
Use the Spacebar to switch between "no" and "yes".
After copying LAN Support, insert the driver diskette into
drive A.
3. specify the drive and path of the DOS NDIS files.
For example: A:\NDIS\DOS [Enter]
4. The installation procedure is completed after copying the
necessary files.
2.2 Method 2 -- Modifying the contents of the CONFIG.SYS file and
PROTOCOL.INI files after installing other network driver:
1. Copy the ENW35.DOS file to the directory where your IBM LAN
Support program resides.
2. Modify the NDIS device driver statement in the CONFIG.SYS
as follows:
DEVICE = [drive]:\path\ENW35.DOS
3. Modify the PROTOCOL.INI file as follows:
BINDINGS = ENW35I_NIF
:
:
[ENW35I_NIF]
DRIVERNAME = ENW35$
3.0 Installation Notes For Lan Services 4.x
-------------------------------------------
1. Execute the installation program from the IBM DOS LAN SERVICES
diskette
Type: >a:\install
2. From the Network card field, select "Network card not shown in
list below...".
3. Insert the driver diskette into the drive A or B.
4. Specify the path for the corresponding oemsetup.inf file of the
OEM driver intended for use. Then, press Enter. The program
will display the driver name.
Ex: A:\NDIS\DOS
5. Check that the driver configuration is correct.
6. Complete the installation process, then restart your system to
use the DOS LAN Services.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.