==================================================================
NOTES ON
Installing PLANET ENW-3501 Ethernet PC Card
For OS2 Users
==================================================================
(c) 1997 Copyright PLANET ALL RIGHTS RESERVED
This document contains general information, which is not included in the
ENW-3501 Ethernet PC Card USER'S GUIDE or onscreen instructions, for OS2
users regarding ENW-3501 PC Card installation.
This document contains information on the following topics:
1.0 Introduction
2.0 Hot-Swap
3.0 Installation Notes
3.1. For NDIS.OS2 Driver
3.2 For ODI.OS2 Driver
___________________________________________________________________
1.0 Introduction
-----------------
The ENW-3501 is designed to work with the OS/2 v2.1 or above which
supports the PCMCIA Card Services. Note the PCMCIA Card Services,
named PCMCIA.SYS, for OS/2 should be added to your CONFIG.SYS file.
2.0 Hot-Swap
------------
The NDIS OS/2 driver supports the On-Line Hot-Swap function which
allows the ENW-3501 PC Card to be removed and re-inserted without
reloading the driver.
IBM OS/2 Swap, DSCD.OS2 and DSCDOPEN.OS2 are Client Drivers.
which work together with the ODI OS/2 driver in a Netware
environment.
3.0 Installation Notes
-----------------------
3.1. For NDIS.OS2 Driver
OS/2 v3.0 Warp Installation
---------------------------
Follow the steps:
Step1
Install OS/2 v3.0 Warp
The following is an example CONFIG.SYS file which will be
created after the OS/2 v3.0 Warp is installed.
*** Example CONFIG.SYS file ***
-------------------------------------------
.
.
BASEDEV=PCMCIA.SYS ------- Card Services
DEVICE=C:\OS2\MDOS\VPCMCIA.SYS
.
.
BASEDEV=IBM2SS01.SYS /s0=2 ------- Socket Services
.
Step2
Restart your computer.
Step 3
Please refer to \NDIS\LANSRV.TXT file to install ENW-3501 PC Card driver
3.2 For ODI.OS2 Driver
------------------------
3.2.1 For IBM Thinkpads using OS/2 v2.x
---------------------------------------
Follow the steps:
Step 1
Install IBM PC Card software into your system.
Step 2
Add DSCD.OS2 and DSCDOPEN.OS2 to the CONFIG.SYS file
*** Example CONFIG.SYS file: (Thinkpad 750/750C)***
---------------------------------------------------
:
DEVICE=C:\OS2\APM.SYS
:
DEVICE=C:\OS2\PCMCIA.SYS
DEVICE=C:\OS2\MDOS\VPCMCIA.SYS
:
DEVICE=C:\path\DSCD.OS2 ----- Vendor Client Drivers
DEVICE=C:\path\DSCDOPEN.OS2
:
DEVICE=C:\THINKPAD\$ICPMOS2.SYS
DEVICE=C:\THINKPAD\IBM2SS01.SYS /S0=2
DEVICE=C:\THINKPAD\ICRMU01.SYS
:
Step 3
Restart your computer.
Step 4
Please refer to \NETWARE\OS2ODI.TXT file to install ENW-3501 PC CARD
network driver.
Please note:
1. The parameters of DSCD.OS2 must match the parameters of
ODI for OS/2 drivers,
2. Insert ENW-3501 card before boot OS/2 system because OS/2 will
load the client drivers and network driver when it brings up
the system.
3. The default driver parameters are I/O=300 and IRQ=11.
3.2.2 OS/2 v3.0 Warp Installation
----------------------------------
Follow the steps:
Step 1
Install OS/2 v3.0 Warp
Step 2
Edit CONFIG.SYS as follow.
*** Example CONFIG.SYS file ***
----------------------------------------
IFS=C:\OS2\HPFS.IFS /CACHE:512 /CRECL:4 /AUTOCHECK:C
PROTSHELL=C:\OS2\PMSHELL.EXE
SET USER_INI=C:\OS2\OS2.INI
SET SYSTEM_INI=C:\OS2\OS2SYS.INI
SET OS2_SHELL=C:\OS2\CMD.EXE
SET AUTOSTART=PROGRAMS,TASKLIST,FOLDERS,CONNECTIONS,LAUNCHPAD
SET RUNWORKPLACE=C:\OS2\PMSHELL.EXE
SET COMSPEC=C:\OS2\CMD.EXE
LIBPATH=.;C:\OS2\DLL;C:\OS2\MDOS;C:\;C:\OS2\APPS\DLL;C:\MMOS2\DLL;
C:\NETWARE;
SET PATH=C:\OS2;C:\OS2\SYSTEM;C:\OS2\INSTALL;C:\;C:\OS2\MDOS;
C:\OS2\APPS; C:\MMOS2;C:\NETWARE;L:\OS2;P:\OS2;L:\NLS;P:\NLS;
SET DPATH=C:\OS2;C:\OS2\SYSTEM;C:\OS2\INSTALL;C:\;C:\OS2\BITMAP;
C:\OS2\MDOS;C:\OS2\APPS;C:\MMOS2;C:\MMOS2\INSTALL;C:\NETWARE;
L:\OS2;P:\OS2;L:\NLS;P:\NLS;
SET PROMPT=$i[$p]
SET HELP=C:\OS2\HELP;C:\OS2\HELP\TUTORIAL;C:\MMOS2\HELP;
SET GLOSSARY=C:\OS2\HELP\GLOSS;
SET IPF_KEYS=SBCS
PRIORITY_DISK_IO=YES
FILES=20
BASEDEV=IBMKBD.SYS
DEVICE=C:\OS2\BOOT\TESTCFG.SYS
DEVICE=C:\OS2\BOOT\DOS.SYS
DEVICE=C:\OS2\BOOT\PMDD.SYS
BUFFERS=90
IOPL=YES
DISKCACHE=D,LW
MAXWAIT=3
MEMMAN=SWAP,PROTECT
SWAPPATH=C:\OS2\SYSTEM 2048 4096
BREAK=OFF
THREADS=256
PRINTMONBUFSIZE=134,134,134
COUNTRY=001,C:\OS2\SYSTEM\COUNTRY.SYS
SET KEYS=ON
SET BOOKSHELF=C:\OS2\BOOK;C:\MMOS2;
SET SOMIR=C:\OS2\ETC\SOM.IR;C:\OS2\ETC\WPSH.IR;C:\OS2\ETC\WPDSERV.IR
SET SOMDDIR=C:\OS2\ETC\DSOM
REM SET DELDIR=C:\DELETE,512;
BASEDEV=PRINT01.SYS
BASEDEV=IBM1FLPY.ADD
BASEDEV=IBM2FLPY.ADD
BASEDEV=IBM1S506.ADD
BASEDEV=XDFLOPPY.FLT
BASEDEV=OS2DASD.DMD
SET EPMPATH=C:\OS2\APPS;
PROTECTONLY=NO
SHELL=C:\OS2\MDOS\COMMAND.COM C:\OS2\MDOS
FCBS=16,8
RMSIZE=640
DEVICE=C:\OS2\MDOS\VEMM.SYS
DOS=LOW,NOUMB
DEVICE=C:\OS2\MDOS\VXMS.SYS /UMB
DEVICE=C:\OS2\MDOS\VDPMI.SYS
DEVICE=C:\OS2\MDOS\VDPX.SYS
DEVICE=C:\OS2\BOOT\APM.SYS
DEVICE=C:\OS2\MDOS\VAPM.SYS
DEVICE=C:\OS2\MDOS\VMOUSE.SYS
DEVICE=C:\OS2\BOOT\POINTDD.SYS
DEVICE=C:\OS2\BOOT\MOUSE.SYS
CODEPAGE=437,850
DEVINFO=KBD,US,C:\OS2\KEYBOARD.DCP
BASEDEV=PCMCIA.SYS ---------------- Card Services
DEVICE=C:\OS2\MDOS\VPCMCIA.SYS ----------------
DEVICE=C:\OS2\BOOT\COM.SYS
DEVICE=C:\OS2\MDOS\VCOM.SYS
DEVICE=C:\OS2\BOOT\AUTODRV2.SYS C:\OS2\AUTODRV2.INI
******************************************************
DEVICE=C:\path\DSCD.OS2 /IOP:320 /IRQ:11 ----- ADD Vendor Client
DEVICE=C:\path\DSCDOPEN.OS2 ----- Driver here
******************************************************
BASEDEV=IBM2SS01.SYS /s0=2 ----- Socket Services
DEVINFO=SCR,VGA,C:\OS2\BOOT\VIOTBL.DCP
SET VIDEO_DEVICES=VIO_SVGA
SET VIO_SVGA=DEVICE(BVHVGA,BVHSVGA)
DEVICE=C:\OS2\MDOS\VSVGA.SYS
DEVICE=C:\MMOS2\CS4231.SYS N:BSAUD1$
DEVICE=C:\MMOS2\VCS4231.SYS BSAUD1$
SET MMBASE=C:\MMOS2;
SET DSPPATH=C:\MMOS2\DSP;
SET NCDEBUG=4000
DEVICE=C:\MMOS2\SSMDD.SYS
DEVICE=C:\MMOS2\R0STUB.SYS
REM --- NetWare Requester statements BEGIN ---
SET NWLANGUAGE=ENGLISH
DEVICE=C:\NETWARE\LSL.SYS
RUN=C:\NETWARE\DDAEMON.EXE
REM -- ODI-Driver Files BEGIN --
DEVICE=C:\NETWARE\ENW35.SYS
rem DEVICE=C:\NETWARE\NE2000.SYS
REM -- ODI-Driver Files END --
REM DEVICE=C:\NETWARE\ROUTE.SYS
DEVICE=C:\NETWARE\IPX.SYS
DEVICE=C:\NETWARE\SPX.SYS
RUN=C:\NETWARE\SPDAEMON.EXE
DEVICE=C:\NETWARE\NMPIPE.SYS
rem DEVICE=C:\NETWARE\NPSERVER.SYS
RUN=C:\NETWARE\NPDAEMON.EXE
DEVICE=C:\NETWARE\NWREQ.SYS
IFS=C:\NETWARE\NWIFS.IFS
RUN=C:\NETWARE\NWDAEMON.EXE
DEVICE=C:\NETWARE\NETBIOS.SYS
RUN=C:\NETWARE\NBDAEMON.EXE
DEVICE=C:\NETWARE\VIPX.SYS
DEVICE=C:\NETWARE\VSHELL.SYS PRIVATE
REM --- NetWare Requester statements END ---
Step 3
Restart your computer.
Step 4
Please refer to \NETWARE\OS2ODI.TXT file to install ENW-3501 PC CARD
network driver.
Please note:
1. The parameters of DSCD.OS2 must match the ODI for OS/2 drivers,
2. Insert ENW-3501 card before OS/2 system boots up because OS/2
will load the client drivers and network driver upon reboot.
3. The default driver parameters are I/O=300 and IRQ=11.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.