PLANET Support Publishing INST_DOS.TXT January 1996
PLANET ENW-3500-2T PCMCIA Ethernet Card Installation
Contents
ÄÄÄÄÄÄÄÄ
Introduction
Requirements
Minimum Skill Level
Getting Started
Troubleshooting
Introduction
ÄÄÄÄÄÄÄÄÄÄÄÄ
The ODI DOS driver, NDIS DOS driver, and NDIS OS/2 driver are the only
network operating system drivers that support an On-Line Hot-Swap
function. Hot-swap allows the card to be removed and re-inserted with
out reloading the driver. Eventhough the driver supports Hot-Swap your
NOS may not support hot-swap.
DCD16.EXE:
DCD16.EXE is an integrated version of the open adapter utility. DCD16.EXE
supports Intel 82365SL or compatible, Toshiba T3300SL's ICCNT, and Socket
Services 1.01, v2.0, v2.01, v2.10, Card Services v2.0, v2.01, v2.10.
ELONEX\PCM.EXE
PCM.EXE is an enabler for Elonex Notebook made for the UK market. The
Elonex notebook supports 1 PCMCIA slot.
Requirements
ÄÄÄÄÄÄÄÄÄÄÄÄ
A PCMCIA compatible Laptop
A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and
VLSI) or Databook compatible.
A knowledge of basic DOS commands and editing text files
Minimum Skill Level
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
A knowledge of basic DOS commands
A knowledge of editing text files
A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
A knowledge of the network driver configuration being used
Please see Support Options if you are not comfortable will this skill
level
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
DCD16 (Client driver configuration)
The DCD16.EXE is used to open the I/O window mapping and IRQ of ENW-3500-2T
PCMCIA Ethernet Card. The Socket Services(v1.01) or DATABOOK Socket
and Cardtalk must be installed before installing DCD16.
NOTE: IRQ parameter uses 11 or other except IRQ 9 because DATABOOK
doesn't support IRQ 9.
Two methods can be used to execute DCD16.EXE:
Method 1
ÄÄÄÄÄÄÄÄ
At a DOS prompt,
A>DCD16 [/iop:P0] [/irq:P1] [/slt:P2]
Method 2
ÄÄÄÄÄÄÄÄ
In DOS config.sys
DEVICE=DCD16.EXE [/iop:P0] [/irq:P1] [/slt:P2]
The optional parameters:
/iop :I/O base
/irq :IRQ number
/slt :Slot number
P0 :The selectable window I/O base with 0x20 range.
The default value is 0x300.
P1 :The selectable irq value.
The default value is 0x11.
P2 :The selectable slot number.
The default number is 0.
Example:
A>DCD16 /iop:320 /irq:11 /slt:1
DCD16 (Full PCMCIA driver configuration)
The DCD16.EXE is used to open the I/O window mapping and IRQ of the PCIC
PCMCIA chipset. Inorder to run drivers of ENW-3500-2T, DCD16.EXE must be
executed first. The given parameters of ENW-3500-2T drivers must match the
hardware parameters settings of DCD16.EXE.
Two methods can be used to execute DCD16.EXE:
Method 1
ÄÄÄÄÄÄÄÄ
At a DOS prompt,
A>DCD16 [/iop:P0] [/irq:P1] [/slt:P2]
Method 2
ÄÄÄÄÄÄÄÄ
In DOS config.sys
DEVICE=DCD16.EXE [/iop:P0] [/irq:P1] [/slt:P2]
The optional parameters:
/iop :I/O base
/irq :IRQ number
/slt :Slot number
P0 :The selectable window I/O base with 0x20 range.
The default value is 0x300.
P1 :The selectable irq value.
The default value is 0x11.
P2 :The selectable slot number.
The default number is 0.
Example:
A>DCD16 /iop:320 /irq:11 /slt:1
Toshiba ICCNT (Full PCMCIA driver configuration)
The DCD16.EXE is used to open the I/O window mapping and IRQ of the
ICCNT PCMCIA chipset. Inorder to run drivers of ENW-3500-2T, DCD16.EXE must
be executed first. The given parameters of ENW-3500-2T drivers must match
the hardware parameters settings of DCD16.EXE.
Two methods can be used to execute DCD16.EXE:
Method 1
ÄÄÄÄÄÄÄÄ
At a DOS prompt,
A>DCD16 [/iop:P0] [/irq:P1] [/slt:P2]
Method 2
ÄÄÄÄÄÄÄÄ
In DOS config.sys
DEVICE=DCD16.EXE [/iop:P0] [/irq:P1] [/slt:P2]
The optional parameters:
/iop :I/O base
/irq :IRQ number
/slt :Slot number
P0 :The selectable window I/O base with 0x20 range.
The default value is 0x300.
P1 :The selectable irq value.
The default value is 0x11.
P2 :The selectable slot number.
The default number is 0.
Example:
A>DCD16 /iop:320 /irq:11 /slt:1
SystemSoft Installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
SystemSoft is a company that develops PCMCIA chipset drivers.
The package is call CardSoft, CardWizard, and CardWizard Pro.
The package provides drivers that support the Intel 82365SL PCIC
compatible controllers, and Databook TCIC-2/N controller chipsets.
The fastest way to install ENW-3500-2T: (see full install below)
Remark the Card library file in the CARDID.INI and enable
ENW-3500-2T by installing network driver directly. Installing the
super driver will auto-detect, and set the related resources itselft
such as I/O and IRQ.
Ex:
Modify CARDID.INI as follow.
: :
: :
[Libraries] Changed => [Libraries]
CardLib=CARDID.CLB ;CardLib=ICARD.CLB
: :
Reboot PC
Install ENW-3500-2T driver (ODI MLID driver example)
Run Quick Netware Installation in AUTOinstall
Create a batch file that executes the following
\ODI.DOS\LSL
\ODI.DOS\ENW35
\ODI.DOS\IPXODI
\ODI.DOS\NETX (This file must be supplied by you, it is possible
to find it on another workstation)
Finish the installation
Standard SystemSoft Install
Install CardSoft into your system.
Update .CLB file that provided by ENW-3500-2T driver diskette
to CARDSOFT which installed by you.
New .CLB file is in \SETUP\CARDSOFT.
Check [Libraries] section in CARDID.INI file.
Add CardLib=ICARD.CLB statement if the statement was not exist.
Sample CARDID.INI file:
*. For CardSoft v3.0:
: :
: :
[Libraries] Changed => [Libraries]
CardLib=CARDID.CLB CardLib=ICARD.CLB
: CardLib=CARDID.CLB
: :
*. For CardSoft v3.1 or CardWizard v1.0:
: :
: :
[Libraries] Changed => [Libraries]
: :
;CardLib=ICARD.CLB CardLib=ICARD.CLB
: :
: :
Re-boot your computer.
Install network driver.
Phoenix Installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Pheonix is a company that develops PCMCIA chipset drivers.
The package is call PCM+ 2.0 or PCM+ 3.0. The package provides
drivers that support the Intel 82365SL PCIC compatible controllers,
and Databook TCIC-2/N controller chipsets.
The fastest way to install ENW-3500-2T: (see full install below)
Install ENW-3500-2T super network driver directly. That will save
the time of setting and the more easier to use because ENW-3500-2T
super driver will auto-detect related resources in the system
such as I/O and IRQ.
Example:
Install PCM Plus first
Install ENW-3500-2T driver (ODI MLID driver example)
Run Quick Netware Installation in AUTOinstall
Create a batch file that executes the following
\ODI.DOS\LSL
\ODI.DOS\ENW35
\ODI.DOS\IPXODI
\ODI.DOS\NETX (This file must be supplied by you, it is possible
to find it on another workstation)
Finish the installation
Standard PCM Plus Install
Install PCM Plus v3.0/3.11/3.2/4.0 into your system. For using
PCM Plus v3.x, execute PCM.EXE to add ENW-3500-2T card to list item.
It will modify PCM.INI file by PCM.EXE.
Insert ENW-3500-2T card into PCMCIA slot
Execute PCM.EXE that supported by Phoenix PCM Plus 3.x
Choose Configure item by ALT-C.
Choose Add Card to List item and Enter
Exit PCM.EXE by Alt-V
Re-boot your computer.
Install network driver.
Award Cardware Install
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Award is a company that develops PCMCIA chipset drivers.
The package is call Cardware. The package provides drivers that
support the Intel 82365SL PCIC compatible controllers.
The fastest way to install ENW-3500-2T: (see full install below)
Install ENW-3500-2T super network driver directly. That will save
the time of setting and the more easier to use because ENW-3500-2T
super driver will auto-detect related resources in the system
such as I/O and IRQ.
Example:
Install Cardware first
Install ENW-3500-2T driver (ODI MLID driver example)
Run Quick Netware Installation in AUTOinstall
Create a batch file that executes the following
\ODI.DOS\LSL
\ODI.DOS\ENW35
\ODI.DOS\IPXODI
\ODI.DOS\NETX (This file must be supplied by you, it is
possible to find it on another workstation)
Finish the installation
AMI CardManager Install
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
AMI is a company that develops PCMCIA chipset drivers. The package is
call CardManager. The package provides drivers that support the
Intel 82365SL PCIC compatible controllers.
AMI CardManager v1.0:
Install AMI PCMCIA software into your system.
Add DCD16.EXE to CONFIG.SYS
Sample CONFIG.SYS file:
:
DEVICE=C:\AMI\SSVADEM.SYS
DEVICE=C:\AMI\AMICS.SYS
DEVICE=C:\AMI\PCATA.SYS
DEVICE=C:\AMI\PCMODEM.SYS /COM=3 /IRQ=5
DEVICE=C:\path\DCD16.EXE ÄÄÄ>Add this line
DEVICE=C:\AMI\AICARD29.EXE
:
Re-boot your computer.
Install network driver.
AMI CardManager v2.0:
Install AMI CardManager v2.0
Install ENW-3500-2T driver (ODI MLID driver example)
Run Quick Netware Installation in AUTOinstall
Create a batch file that executes the following
\ODI.DOS\LSL
\ODI.DOS\ENW35
\ODI.DOS\IPXODI
\ODI.DOS\NETX (This file must be supplied by you, it is possible
to find it on another workstation)
Finish the installation
IBM PCMCIA Driver Install
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
IBM develops PCMCIA chipset drivers. The package is called DSS.
The package provides drivers that support the Intel 82365SL PCIC
compatible controllers.
The fastest way to install ENW-3500-2T: (see full install below)
Install ENW-3500-2T super network driver directly. That will save
the time of setting and the more easier to use because ENW-3500-2T
super driver will auto-detect related resources in the system
such as I/O and IRQ.
Example:
Install the IBM drivers first usually installed on purchase
Install ENW-3500-2T driver (ODI MLID driver example)
Run Quick Netware Installation in AUTOinstall
Create a batch file that executes the following
\ODI.DOS\LSL
\ODI.DOS\ENW35
\ODI.DOS\IPXODI
\ODI.DOS\NETX (This file must be supplied by you, it is
possible to find it on another workstation)
Finish the installation
Standard IBM Install
Install IBM PCMCIA software into your system.
Add DCD16.EXE to CONFIG.SYS
Sample CONFIG.SYS file: (Thinkpad 750/750C)
:
DEVICE=C:\THINKPAD\IBMDSS01.SYS /S0=2
DEVICE=C:\THINKPAD\IBMDOSCS.SYS
DEVICE=C:\THINKPAD\DICRMU01.SYS /MA=C000-CFFF
DEVICE=C:\THINKPAD\$ICPMDOS.SYS
DEVICE=C:\DOS\POWER.EXE
DEVICE=C:\path\DCD16.EXE ÄÄÄ>Add this line
:
Re-boot your computer.
Install network driver.
CardTalk Installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Databook develops PCMCIA chipset drivers. The package is called Cardtalk
The package provides drivers that support the TCIC/2N PCMCIA Chipset or
compatible controllers.
The fastest way to install ENW-3500-2T: (see full install below)
Install ENW-3500-2T super network driver directly. That will save
the time of setting and the more easier to use because ENW-3500-2T
super driver will auto-detect related resources in the system
such as I/O and IRQ.
Example:
Install Cardtalk
Install ENW-3500-2T driver (ODI MLID driver example)
Run Quick Netware Installation in AUTOinstall
Create a batch file that executes the following
\ODI.DOS\LSL
\ODI.DOS\ENW35
\ODI.DOS\IPXODI
\ODI.DOS\NETX (This file must be supplied by you, it is
possible to find it on another workstation)
Finish the installation
Standard Cardtalk Install
Install DATABOOK PCMCIA software into your system.
Add DCD16.EXE to CONFIG.SYS
Sample CONFIG.SYS file:
:
DEVICE=C:\DATABOOK\THINCARD\TMB240.SYS /IO:240
DEVICE=C:\DATABOOK\CARDTALK\CTALKCS.EXE
DEVICE=C:\DATABOOK\CARDTALK\CARDTALK.SYS /A /IOW=300-31F
DEVICE=C:\path\DCD16.EXE ÄÄÄ>Add this line
:
Re-boot your computer.
Install network driver.
Elonex Notebook Installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
The fastest way to install ENW-3500-2T: (see full install below)
Install ENW-3500-2T super network driver directly. That will save
the time of setting and the more easier to use because ENW-3500-2T
super driver will auto-detect related resources in the system
such as I/O and IRQ.
Example:
Power on Elonex Notebook
Insert ENW-3500-2T before load PCM.EXE from the
\IBMPC\INSTALL\ELONEX
The parameter for PCM.EXE supported /IOP:xxx, /IRQ:x and
/? for help.
Install ENW-3500-2T driver (ODI MLID driver example)
Run Quick Netware Installation in AUTOinstall
Create a batch file that executes the following
\ODI.DOS\LSL
\ODI.DOS\ENW35
\ODI.DOS\IPXODI
\ODI.DOS\NETX (This file must be supplied by you, it is
possible to find it on another workstation)
Finish the installation
HP OMNIBOOK 600C Install
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Power on HP600C Notebook
Copy A:\IBMPC\INSTALL\HP600C\CARDID.INI to C:\CARDSOFT
Copy A:\IBMPC\INSTALL\HP600C\ICARD.CLB to C:\CARDSOFT
RESET HP600C again
Install ENW-3500-2T driver (ODI MLID driver example)
Run Quick Netware Installation in AUTOinstall
Create a batch file that executes the following
\ODI.DOS\LSL
\ODI.DOS\ENW35
\ODI.DOS\IPXODI
\ODI.DOS\NETX (This file must be supplied by you, it is possible
to find it on another workstation)
Finish the installation
Troubleshooting
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
dcd16 [/hlp]
dcd16 [/chk]
dcd16 /parameter: [h]ex;[n]umber;[w]word (range, interval, default)
/irq:h (2-15,1,11) -- IRQ number
/iop:hhh (200-380,20,300) -- I/O base
/slt:n (0-?,1,0) -- Slot number
/? -- Help message
/hlp -- Help message
/chk -- List PCMCIA environment
Before loading any network drivers or running Net Bind (Netstart) for
DOS drivers.
Run C:\DOS\DEBUG
At the - prompt input i 300 (Example: -i 300{enter})
If the response is 21 continue with your network operating system
installation.
If the response is anything but 21 please consult the appropriate
install above.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.