1. v103.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (v103.zip)

PLANET Support Publishing                                       January 1996

         PLANET ENW-3500-2T PCMCIA Ethernet Card Installation for NT 3.5

 Contents
 ÄÄÄÄÄÄÄÄ
        Introduction
        Requirements
        Minimum Skill Level
        Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
        Getting Started will describe the installation for NT 3.5.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
        A PCMCIA compatible Laptop
        A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and
         VLSI) or Databook compatible.
        Window NT 3.5
        A ENW-3500-2T
        A knowledge of basic NT commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        A knowledge of basic NT commands
        A knowledge of editing text files
        A knowledge of NT basic file structure
        A knowledge of the network driver configuration being used
        Please see Support Options if you are not comfortable will this
         skill level

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        The Windows NT CD/disks are need to complete this installation

        From the "Main" window, select Control Panel
        In the Control Panel, select Network Icon
        In the Network Setup, select Add Adapter

    Windows NT will display a list of all available drivers.

        Select "OTHERS" for third-party adapters not included in the list.

        The program prompts for the directory containing the Ethernet drivers.

        Insert the driver diskette in Drive A, and then type the following

         A:\NT35

         Note:
         Make sure the "DISK1" file at the ROOT DIRECTORY of floppy diskette.

        Windows NT will attempt to locate the OEMSETNT.INF file in the
         specified path. If it exists there, Windows NT will then copy the
         appropriate drivers to the Windows NT system.

        The drivers are now properly installed.  The installation procedure
         will then proceed to the next steps. Please refer to your Windows NT
         installation guide for information on these steps.

        Windows NT will pop up one window to ask the vlaues of some keywords.
         Such as  "IO Port", "IRQ Number", "Memory Base", "Slot Number",
         "NetworkAddress".

        If you want to change the default MAC Address, USE the
         "NetworkAddress" to specify the MAC Address. The NetworkAddress
          is a 12 digits string(ex. 001122334455)

        After the initial installation, the drivers will be permanently
         installed to the Windows NT system.  Subsequent accesses to the
         network driver list will include these drivers as options.

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.