PLANET Support Publishing NW4XX.TXT January 1996 PLANET ENW-3500-2T PCMCIA Ethernet Card Installation for NetWare Server 4.x Driver Contents ÄÄÄÄÄÄÄÄ Introduction Requirements Minimum Skill Level Getting Started Introduction ÄÄÄÄÄÄÄÄÄÄÄÄ This installation assumes that the PCMCIA drivers are working properly. Please consult INST_DOS.TXT for help with PCMCIA Drivers. Getting Started will describe the installation instructions. Requirements ÄÄÄÄÄÄÄÄÄÄÄÄ A PCMCIA compatible Laptop A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and VLSI) Netware 4.xx Server Software A ENW-3500-2T A knowledge of basic DOS commands and editing text files Minimum Skill Level ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ A knowledge of basic DOS commands A knowledge of editing text files A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT) A knowledge of the network driver configuration being used Please see Support Options if you are not comfortable will this skill level Getting Started ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Using the install menu (for NetWare 4.1 only for other version see below) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Boot up the Novell Server. After booting up, execute "LOAD INSTALL". Type: : load install Select "Driver Option" and then press Enter Select "Configure network drivers" and then press Enter Select "Select a driver" and then press Enter Press the Ins key to install an unlisted driver Press F3 to specify a different PATH (C:\SRV4X) and then press Enter <PATH> is the directory where ENW35.LAN resides Select "ENW35.LAN" and then copy the ENW35.LAN file Set the adapter parameters, then select "Save parameters and load driver" From the Novell Server side, execute "load install". Type: :load install Select <NCF files options> Select <Edit AUTOEXEC.NCF> Save the file to make modifications permenent Modifying an existing NetWare 4.x Server ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ From any workstation, log in to the Novell server as a SUPERVISOR. Copy all provided NLM and LAN files into your server's SYSTEM directory >copy <PATH>\*.* F:\SYSTEM <PATH> here is the directory where support NLMs and ENW35.LAN reside. From the Novell Server side, execute "load install". Type: :load install Select <NCF files options> Select <Edit AUTOEXEC.NCF> Modify the server's AUTOEXEC.NCF file as follows. :load ENW35.LAN (msm.nlm and ethertsm.nlm will also be loaded when loading ENW35.LAN) :bind ipx to ENW35 NET=xxxx Shut down the server and then turn it ON again. The driver is now installed and running.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.