PLANET Support Publishing NW311.TXT January 1996
PLANET ENW-3500-2T PCMCIA Ethernet Card Installation
for NetWare Server 3.11 Driver
Contents
ÄÄÄÄÄÄÄÄ
Introduction
Requirements
Minimum Skill Level
Getting Started
Introduction
ÄÄÄÄÄÄÄÄÄÄÄÄ
This installation assumes that the PCMCIA drivers are working properly.
Please consult INST_DOS.TXT for help with PCMCIA Drivers.
Getting Started will describe the installation instructions.
Requirements
ÄÄÄÄÄÄÄÄÄÄÄÄ
A PCMCIA compatible Laptop
A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and
VLSI)
Netware 3.11 Server Software
A ENW-3500-2T
A knowledge of basic DOS commands and editing text files
Minimum Skill Level
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
A knowledge of basic DOS commands
A knowledge of editing text files
A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
A knowledge of the network driver configuration being used
Please see Support Options if you are not comfortable will this
skill level
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Copy the ENW35.LAN file from the <PATH>\ENW35.LAN directory
into the subdirectory of your server. Type:
>copy <PATH>\ENW35.LAN \NW311
; if nw311 is the server subdirectory
; <PATH> is the path where ENW35.LAN resides. If the autoinstall
was used <PATH>=\NW311.
Copy all provided NLM files into your server directory. Type:
>copy <PATH>\*.NLM \NW311
Run SERVER.EXE on the server.
Edit the AUTOEXEC.NCF file as follows:
:load install
Select <System Option>
Select <Edit Autoexec.NCF file>
Modify the server's AUTOEXEC.NCF as follows:
load C:\NW311\LSLENH.NLM
load C:\NW311\PATCHMAN.NLM
load C:\NW311\MSM.NLM
load C:\NW311\ETHERTSM.NLM
load C:\NW311\ENW35.LAN
bind ipx to ENW35 net=xxxx ;xxxx is the network # ie. 33
Press Esc after editing.
Select "Yes" to save.
Select "Exit" to exit installation.
Shut down the server and then turn it ON again.
The driver is now installed and running.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.