1. v103.zip Driver
2. BANYAN.TXT File Contents

BANYAN.TXT Driver File Contents (v103.zip)

PLANET Support Publishing          BANYAN.TXT                   January 1996

       PLANET ENW-3500-2T PCMCIA Ethernet Card Installation for Banyan Vines

 Contents
 ÄÄÄÄÄÄÄÄ
        Introduction
        Requirements
        Minimum Skill Level
        Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
        This installation assumes that the PCMCIA drivers are working properly.
        Please consult INST_DOS.TXT for help with PCMCIA Drivers.
        Getting Started will describe the installation for Banyan.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
        A PCMCIA compatible Laptop
        A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and
         VLSI) or Databook compatible.
        Banyan Vines V4.x(2) or higher
        A ENW-3500-2T
        A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        A knowledge of basic DOS commands
        A knowledge of editing text files
        A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
        A knowledge of the network driver configuration being used
        Please see Support Options if you are not comfortable will this
         skill level

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
    There are two methods of copying files from the Banyan VINES
    workstation to the bootable diskette or subdirectory on the hard
    disk.

    Method 1:
        Execute the 'INSTALL' command included in the diskette labeled
         "VINES MASTER DISK".
        Follow the given instructions for copying files.

    Method 2:
        Execute the 'BAN' command.
        Login to VINES system.
        Execute the 'PCCOPY' command.
        Select the 'NDIS Ethernet' option and follow the instructions for
         copying files.
        Insert the driver program diskette in Drive A and the prepared
         bootable diskette in Drive B. Then, copy the appropriate NDIS
         driver file enw35.dos from Drive A to Drive B or to the
         subdirectory of the hard disk.
        Create a CONFIG.SYS file with the following statements:

          DEVICE=PROTMAN.DOS /I:A:\
          DEVICE=ENW35.DOS

         NOTE:  A:\ is the path where Banyan VINES workstation files reside.

       Create a enw35.nif file containing the following statements:

         Model = PLANET ENW-3500-2T PCMCIA Ethernet Card
         Path = A:\
         DeviceDriver = ENW35.DOS
         DeviceName = ENW-3500-2T$
         Type = NDIS

         NOTE:  A:\ is the path where Banyan VINES workstation files reside.

      Create a PROTOCOL.INI file with the following lines:

        [PROTOCOL MANAGER]
        drivername = PROTMAN$

        [VINES_XIF]
        drivername = NDISBAN$
        bindings = "ENW35"

        [ENW35]
        drivername = ENW35$

     Execute the 'PCCONFIG' command.

        A "CONFIGURING A PC FOR THE NETWORK" message appears on the
        screen. The program then provides some options you can select.

     Select "1 - Network Card Settings".

        Another screen appears for selecting some options.

     Select "NDIS Ethernet".

     Select the appropriate configuration of the adapter.

     After configuring the adapter, you return to the main screen.
      Select "2 - Login Environment Settings".

     From the next screen, select "NDIS Ethernet".

      The 'PCCONFIG.DB' file will then be created.

     Reboot your computer.

     Login to VINES by executing the 'BAN' command.