PLANET Support Publishing January 1996
PLANET ENW-3500-2T PCMCIA Ethernet Card Installation for Lantastic
Contents
ÄÄÄÄÄÄÄÄ
Introduction
Requirements
Minimum Skill Level
Getting Started
Introduction
ÄÄÄÄÄÄÄÄÄÄÄÄ
This installation assumes that the PCMCIA layer is working properly.
See Getting Started for installation instructions.
Requirements
ÄÄÄÄÄÄÄÄÄÄÄÄ
A PCMCIA compatible Laptop
A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and
VLSI) or Databook compatible.
3-COM Open 3+Share Network Operating System
A ENW-3500-2T
A knowledge of basic DOS commands and editing text files
Minimum Skill Level
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
A knowledge of basic DOS commands
A knowledge of editing text files
A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
A knowledge of the network driver configuration being used
Please see Support Options if you are not comfortable will this
skill level
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Lantastic 5.0 Install
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Using NDIS driver
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
For NDIS driver, PLANET support "ENW35.DOS" driver for ENW-3500-2T
PCMCIA Adapter. User can use "ENW35.DOS" driver to replace
AEXNDIS.DOS which is the NDIS driver offered by ARTISOFT.
*** CONFIG.SYS ****
DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
-------------------------------------------------------------
DEVICE=C:\LANTASTI\AEXNDIS.DOS -------> By Lantastic
* please replace to *
DEVICE=C:\LANTASTI\ENW35.DOS
------------------------------------------------------------
*** STARTNET.BAT ***
-------------------------------------------------------------
C:\LANTASTI\AI-NDIS BIND_TO=AEXNDIS_NIF
* please replace to *
C:\LANTASTI\AI-NDIS BIND_TO=ENW35_NIF
-------------------------------------------------------------
C:\LANTASTI\AILANBIO
C:\LANTASTI\REDIR MachineName
*** PROTOCOL.INI ***
-------------------------------------------------------------
[AEXNDIS_NIF]
DRIVERNAME = AEXNDIS$
* please replace to *
[ENW35_NIF]
DRIVERNAME = ENW35$
--------------------------------------------------------------
Comments:
If you are using PROTMAN.DOS V1.x, you must use the NO_BIND option
on the AI-NDIS command line in the STARTNET.BAT, and you must run
NETBIND.EXE V1.x before AILANBIO.EXE.
Lantastic 6.0 Install
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Using NDIS driver
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
After installing the PLANET driver for Lantastic to
destination directory "C:\LANTASTI.DRV" by PLANET AUTOinstall
program,user can use Lantastic 6.0 install program, and select
"NDIS support for network adapters" then type path
"C:\LANTASTI.DRV". Install program will search "ENW35.DOS"
and "PROTOCOL.INI" and copy these two files to target
directory.
If user already install Lantastic 6.0 and want to install
PLANET's ENW-3500-2T PCMCIA adapter, just replace AEXNDIS.DOS
with PLANET's NDIS driver "ENW35.DOS" at CONFIG.SYS
NOTE: "ENW35.DOS" is an NDIS driver supported by PLANET
"AEXNDIS.DOS" is an NDIS driver supported by ARTISOFT
*** CONFIG.SYS ***
DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
----------------------------------------------------------
DEVICE=C:\LANTASTI\AEXNDIS.DOS -------> By Lantastic
* please replace to *
DEVICE=C:\LANTASTI\ENW35.DOS -------> By PLANET
----------------------------------------------------------
*** STARTNET.BAT ***
@echo ===== Begin Lantastic configuration =====
SET LAN_CFG=C:\LANTASTI
PATH C:\LANTASTI;%PATH%
SET LAN_DIR=C:\LANTASTI.NET
rem Please obtain the NETBEUI.EXE program from Microsoft
NETBEUI
----------------------------------------------------------
AI-NDIS BIND_TO=AEXNDIS_NIF
* please replace to *
AI-NDIS BIND_TO=ENW35_NIF
----------------------------------------------------------
AILANBIO @STARTNET.CFG
REDIR LANTA @STARTNET.CFG
SERVER C:\LANTASTI.NET @STARTNET.CFG
NET LOGIN \\LANTA
@echo ===== End LANtastic configuration =====
*** Protocol.ini ***
[NETBEUI_XIF]
DriverName = netbeui$
Sessions = 6
NCBS = 12
-------------------------------------------------------
Bindings = AEXNDIS_NIF
* please replace to *
Bindings = ENW35_NIF
-------------------------------------------------------
LANABASE = 1
-------------------------------------------------------
[AEXNDIS_NIF]
DRIVERNAME = AEXNDIS$
* please replace to *
[ENW35_NIF]
DRIVERNAME = ENW35$
-------------------------------------------------------
Using ODI DOS driver
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
ODI for DOS driver, PLANET support "ENW35.COM" driver for
ENW-3500-2T PCMCIA Adapter. User can use "ENW35.COM" driver to
replace NRODI.COM which is the ODI for DOS driver offered by
ARTISOFT.
Note: Because ENW35.COM following HSM v4.0 spec, please
save LSL.COM, IPXODI.COM that original supported by Lantastic.
Copy both release driver diskette's LSL.COM, IPXODI.COM to
C:\LANTASTI.
*** STARTNET.BAT ***
@echo ===== Begin Lantastic configuration =====
SET LAN_CFG=C:\LANTASTI
PATH C:\LANTASTI;%PATH%
SET LAN_DIR=C:\LANTASTI.NET
SET NWDBPATH=C:\Lantasti\NW
LSL --> Please use release driver diskette
NRODI --> please replace with ENW35
ODINSUP
IPXODI --> Please use release driver diskette
------------------------------------------------------
AI-NDIS BIND_TO=NRODI
* please replace to *
AI-NDIS BIND_TO=ENW35
------------------------------------------------------
AILANBIO @STARTNET.CFG
REDIR LANTA @STARTNET.CFG
SERVER C:\LANTASTI.NET @STARTNET.CFG
NET LOGIN \\LANTA
@echo ===== End LANtastic configuration =====
*** NET.CFG ***
Please add string below into the NET.CFG file.
Link Driver ENW35
Frame Ethernet_802.3
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.