1. Delkin_4_05_01B.exe Driver
2. msgEN.txt File Contents

msgEN.txt Driver File Contents (Delkin_4_05_01B.exe)

ZD00:  PAUSE  ;
ZD01:  RESUME  ;
ZD02:  Size: ;
ZD03:About PicturePAD;
ZD04:About;
ZD05:AE good;
ZD06:Anti-Clockwise;
ZD07:Anti-Flicker;
ZD08:Aperture prior AE;
ZD09:Aperture priority;
ZD0A:Auto Focus good;
ZD0B:Auto Focus;
ZD0C:Auto;
ZD0D:Average;
ZD0E:Backspace;
ZD0F:Black ink is low;
ZD10:Blur warning;
ZD11:,Bottom to top;
ZD12:BottomLeft;
ZD13:BottomRight;
ZD14:Bright;
ZD15:Brightness Value: ;
ZD16:Buffer Full;
ZD17:Cancel;
ZD18:Cannot copy system folder!;
ZD19:Cannot delete system folder!;
ZD1A:Cannot paste a folder to itself!;
ZD1B:Cannot paste on system folder!;
ZD1C:Cannot rename system folder!;
ZD1D:Can't read directory;
ZD1E:Caps;
ZD1F:Center weighted average;
ZD20:Centered;
ZD21:Compression;
ZD22:Clean;
ZD23:Cleaning takes a couple of minutes.
Cleaning is finished when the power light on the printer's control panel stops flashing.
To check the effectiveness of cleaning, click <Nozzle Check>.;
ZD24:Cleaning;
ZD25:Clear Directory Cache;
ZD26:Clockwise;
ZD27:Cloudy;
ZD28:Color space not supported.;
ZD29:Color;
ZD2A:Colour ink is low;
ZD2B:Compression method not supported.;
ZD2C:Confirm Delete;
ZD2D:Confirm Empty Recycle Folder;
ZD2E:Continuous AF;
ZD2F:Contrast: ;
ZD30:Contrast;
ZD31:Copy to Memory Card;
ZD32:COPY;
ZD33:Copy;
ZD34:Custom white balance;
ZD35:CUT;
ZD36:Cut;
ZD37:Daylight;
ZD38:DaylightColor-fluorescence;
ZD39:DaywhiteColor-fluorescence;
ZD3A:Del;
ZD3B:Delete cache file?;
ZD3C:Delete folder `;
ZD3D:Delete;
ZD3E:Digital still camera;
ZD3F:digital zoom;
ZD40:Economy;
ZD41:Edit;
ZD42:of;
ZD43:Empty Recycle Folder;
ZD44:Empty Recycle Folder?;
ZD45:Enter a filename. Filename with space(s) only is not allowed!;
ZD46:ERROR;
ZD47:Exposure Program: ;
ZD48:Exposure Time: ;
ZD49:Fast;
ZD4A:Fatal Error;
ZD4B:File Copy Completed !;
ZD4C:File;
ZD4D:Fine;
ZD4E:Finish;
ZD4F:Firmware: ;
ZD50:Fisheye;
ZD51:Flash fired with strobe return light;
ZD52:Flash fired without strobe return light;
ZD53:Flash fired;
ZD54:Flash Intensity: ;
ZD55:Flash Mode: ;
ZD56:Flash: ;
ZD57:Flash;
ZD58:Flip Horizontally;
ZD59:Fluorescence;
ZD5A:Fluorescent;
ZD5B:fNumber: ;
ZD5C:Focal Length: ;
ZD5D:Hard;
ZD5E:Head Cleaning;
ZD5F:  Height: ;
ZD60:Help;
ZD61:High(HARD);
ZD62:High;
ZD63:HP Print Setup;
ZD64:Image directly photographed;
ZD65:Image size exceeds supported dimensions.;
ZD66:Incandescense;
ZD67:Infinity;
ZD68:Ink Out;
ZD69:Input file size exceeds 6MB.;
ZD6A:Insufficient Memory!;
ZD6B:Invalid BMP file!;
ZD6C:Landscape mode;
ZD6D:Landscape scene;
ZD6E:Landscape;
ZD6F:,Left to right;
ZD70:LeftBottom;
ZD71:LeftTop;
ZD72:Look at the alignment sheet.
Select the most vertically aligned patterns from the list below and click <Realignment>. The alignment sheet will be printed again.;
ZD73:Look at the printed pattern.
If you find any faint areas or gaps in the printed pattern, you should click <Clean> to clean the print heads using the Head Cleaning Utility. Otherwise, click <Finish>.;
ZD74:Low (ORG);
ZD75:Low;
ZD76:Macro;
ZD77:Make: ;
ZD78:Manual control;
ZD79:Manual exposure.;
ZD7A:Manual Focus Distance: ;
ZD7B:Manual Focus;
ZD7C:Manual;
ZD7D:Media Type;
ZD7E:Model: ;
ZD7F:Monochrome;
ZD80:Multi-segment;
ZD81:Multi-spot;
ZD82:Name: ;
ZD83:New Folder;
ZD84:Next >;
ZD85:Night scene;
ZD86:No blur warning;
ZD87:No printer driver was found. Please install printer drivers and try again.;
ZD88:Normal (STD);
ZD89:Normal;
ZD8A:Not fired;
ZD8B:Nozzle Check;
ZD8C:Number of Copies:;
ZD8D:Off;
ZD8E:OK;
ZD8F:On;
ZD90:Options;
ZD91:Orientation: ;
ZD92:Other;
ZD93:Out of focus;
ZD94:Output resolution exceeds printable width, please change page size & try again.;
ZD95:Over exposure ;
ZD96:Page Setting;
ZD97:Page Size;
ZD98:Panorama;
ZD99:Paper Jam;
ZD9A:Paper Out;
ZD9B:Partial;
ZD9C:PASTE;
ZD9D:Paste;
ZD9E:Memory Card FULL! File Copy has not been completed!;
ZD9F:Memory Card unavailable or not inserted properly.;
ZDA0:Photo List;
ZDA1:Picture Mode: ;
ZDA2:Please check printer’s connection and ensure that the power is ON.;
ZDA3:Please select a JPEG / BMP / TIFF file and try again.;
ZDA4:Please wait, checking printer’s status in progress...;
ZDA5:Portrait mode;
ZDA6:Portrait scene;
ZDA7:Portrait;
ZDA8:Preset;
ZDA9:Print Head Adjustment;
ZDAA:Print Head Alignment;
ZDAB:Print Setup;
ZDAC:Print Utility;
ZDAD:Print;
ZDAE:Printer Name;
ZDAF:Printer Status Check;
ZDB0:Printing in progress, please wait... To cancel print, press <ESC> key.;
ZDB1:Printing;
ZDB2:Program action (high-speed program);
ZDB3:Program AE;
ZDB4:Program creative (slow program);
ZDB5:Program normal;
ZDB6:Properties;
ZDB7:Quality: ;
ZDB8:Quality;
ZDB9:Ready to Print;
ZDBA:Realignment;
ZDBB:Recording Mode: ;
ZDBC:Red Eye Reduction;
ZDBD:Rename;
ZDBE:Reset Counter ?;
ZDBF:Reset DIR Counter;
ZDC0:Reset Directory Counter;
ZDC1:,Right to left;
ZDC2:RightBottom;
ZDC3:RightTop;
ZDC4:Rotation Directions;
ZDC5:Same file name exists in this folder! Specify a different file name.;
ZDC6:Scale to Fit;
ZDC7:Select All;
ZDC8:Send to Memory Card;
ZDC9:Settings;
ZDCA:Shade;
ZDCB:Sharpness: ;
ZDCC:Shift;
ZDCD:Shutter prior AE;
ZDCE:Shutter priority;
ZDCF:Shutter Speed: ;
ZDD0:Single AF;
ZDD1:Single Shutter;
ZDD2:Slide Show;
ZDD3:SlideShow Interval;
ZDD4:Soft;
ZDD5:Software: ;
ZDD6:Space;
ZDD7:SpeedLight;
ZDD8:Sports scene;
ZDD9:Spot;
ZDDA:Standard light A;
ZDDB:Standard light B;
ZDDC:Standard light C;
ZDDD:Status Monitor;
ZDDE:Strong;
ZDDF:Subject Distance: ;
ZDE0:SXGA Basic;
ZDE1:SXGA Fine;
ZDE2:SXGA Normal;
ZDE3:Taken: ;
ZDE4:Compressed NEF file not supported!;
ZDE5:Support only Canon D30 file!;
ZDE6:The printer will clean the print head nozzles.
Only clean the print heads when faint areas or gaps appear in your printout, because cleaning consumes ink.  Use the Nozzle Check Utility to confirm that the print heads need to be cleaned.;
ZDE7:The printer will print a pattern to check if any nozzles are clogged.
Please ensure that the printer is ON & connected to the eFilm PicturePAD.  The nozzle check requires several sheets of A4 or letter size paper.;
ZDE8:The printer will print an alignment sheet.  Please ensure that the printer is ON & connected to the eFilm PicturePAD.  Print head alignment requires several sheets of A4 or letter size paper.
Click <NEXT> when ready.;
ZDE9:This folder name is not allowed. Choose another name.;
ZDEA:Thumbnail;
ZDEB:TIFF file not supported!;
ZDEC:,Top to bottom;
ZDED:TopLeft;
ZDEE:TopRight;
ZDEF:Tungsten;
ZDF0:Turn Off;
ZDF1:Turn On;
ZDF2:Unable to delete `;
ZDF3:Uncalibrated;
ZDF4:Unknown;
ZDF5:Unrecognized input file format.;
ZDF6:Use this utility to automatically check for printer’s status and also check the level of ink remaining.;
ZDF7:Utility;
ZDF8:Version: ;
ZDF9:VGA Basic;
ZDFA:VGA Fine;
ZDFB:VGA Normal;
ZDFC:View;
ZDFD:Weak;
ZDFE:White Balance: ;
ZDFF:White-fluorescence;
ZD100:Width: ;
ZD101:Wrong JPEG file header.;
ZD102:Zoom: ;
ZD103:Delete all files and folders?;
ZD104:Delete ';
ZD105:No unit;
ZD106:Panorama=;
ZD107:FREE SPACE;
ZD108:;
ZD109:FREE :;
ZD10A:USAGE :;
ZD10B:Cannot paste!;
ZD10C:Status;
ZD10D:File ';
ZD10E:Folder ';
ZD10F:' Exist, Override?;
ZD110:Yes to All;
ZD111:Cannot copy system file !;
ZD112:Cannot delete system file !;
ZD113:Cannot copy or delete system folder !;
ZD114:Italiano;
ZD115:Español;
ZD116:Language;
ZD117:Language Setup;
ZD118:English;
ZD119:Deutsch;
ZD11A:Français;
ZD11B:Japanese;
ZD11C:Chinese;
ZD11D:SlideShow File Name; /*pp-sshow_subdir SlideShow With File Name*/
ZD11E:Printing is canceled.;
ZD11F:Printer not supported.;
ZD120:Unsupported pen.;
ZD121:Illegal coordinates.;
ZD122:Illegal papersize.;
ZD123:Error in printing.;
ZD124:Copy To Favorites;
ZD125:Retry;
ZD126:Internationalization error!!;
ZD127:View Subfolder; /*pp-sshow_subdir*/