1. PumaIIAllWinDriver.zip Driver
2. GC3_JAGUAR_IV_183.INI File Contents

GC3_JAGUAR_IV_183.INI Driver File Contents (PumaIIAllWinDriver.zip)

[PEN_SPEED]
//SPEED_MAX : Maxmun Pen Speed Setting (1/1000 cm/s), Imperial = inch/s* 2540
//SPEED_MIN : Minmun Pen Speed Setting (1/1000 cm/s), Imperial = inch/s* 2540
//SPEED_DEF : Default Pen Speed Setting (1/1000 cm/s), Imperial = inch/s* 2540
//SPEED_OUT : Output Pen Speed Command
SPEED_MAX = 153000
SPEED_MIN = 3000
SPEED_DEF = 72000
SPEED_SHOW = 1
SPEED_OUT = 1

[PEN_FORCE]
//FORCE_MAX : Maxmun Pen Force Setting (1/100000 g), Imperial : Oz* 28350
//FORCE_MIN : Minmun Pen Force Setting (1/100000 g), Imperial : Oz* 28350
//FORCE_DEF : Default Pen Force Setting (1/100000 g), Imperial : Oz* 28350
//FORCE_OUT : Output Pen Force Command
FORCE_MAX = 60000000
FORCE_MIN = 500000
FORCE_DEF = 8000000
FORCE_SHOW = 1
FORCE_OUT = 1

[OFFSET]
//OFFSET_MAX : Maxmun Offset Setting (1/1000 mm)
//OFFSET_MIN : Minmun Offset Setting (1/1000 mm)
//OFFSET_DEF : Default Offset Setting (1/1000 mm)
//OFFSET_OUT : Output Offset Command
OFFSET_MAX = 1000
OFFSET_MIN = 0
OFFSET_DEF = 275
OFFSET_SHOW = 1
OFFSET_OUT = 1

[QUALITY]
//QUAL#_VALUE : Q­È (x0.1)
//QUAL#_SHOW : Åã¥Ü¦¹¿ï¶µ
//QUALITY_DEF : ¹w³]¿ï¶µ , 0 = QUAL1
//QUALITY_OUT : Output Quality Command
QUAL1_VALUE = 02
QUAL1_SHOW = 1
QUAL2_VALUE = 07
QUAL2_SHOW = 1
QUAL3_VALUE = 14
QUAL3_SHOW = 1
QUAL4_VALUE = 28
QUAL4_SHOW = 1
QUAL5_VALUE = 42
QUAL5_SHOW = 1
QUALITY_DEF = 0
QUALITY_OUT = 1

[RUN_VLCD]
SHOW = 0

[RUN_CCD]
SHOW = 1

[USE_PLOT_SET]
SHOW = 1
DEFAULT = 0

[BACK_HOME]
SHOW = 1
DEFAULT = 0

[PARA_FILE]
EXTNAME = JA4
SHOW = 1

[FIELD]
X_SHOW = 1
Y_SHOW = 1
X_MAX = 25000000
Y_MAX = 1830000
X_MIN = 160000
Y_MIN = 30000
X_DEF = 2640000
Y_DEF = 1830000

[UNIT]
//DEFAULT:mm(MM:0), inch(INCH:1)
MM_SHOW = 1
INCH_SHOW = 1
DEFAULT = 0

[INFO]
//VERSION_STRING:Version String(%d.%02d Mean Version, Must keep)
//VER_MAIN:Main Version, VER_EXT:Extend Version (Can't Larger than 99)
VER_MAIN = 3
VER_EXT = 10
VERSION_STRING = "DV %d.%02d"
NAME = Jaguar IV 183

#####################

[EXT_FILES]
PCD = GC3.PCD
LANGUAGE = GC3LNG.INI

[MACHINE]
//VECTOR_COORD	: Vector bass coordinate(LeftTop:0, LeftBottom:1, RightTop:2, RightBottom:3)
//OFFSET	: Offset (0.001mm)
//SORTING	: Vector Sortting (No : 0 , Inside First : 1 , Nearest End Point : 2)
VECTOR_COORD = 1
OFFSET = 0
RES_X = 1016
RES_Y = 1016
SORTING = 0
AAS = 1