Hardware specifications
This is an ASCII file called HWSPECS.TXT in the ATI
CardAssistant INFO directory. Use a text editor or a
word processor with a mono-space font such as Courier
to print this file if needed for reference.
************************************************************
** **
** Specifications for the ATI AT-2500 PCI adapter **
** **
************************************************************
System compatibility
--------------------
PCI systems
PC Interface
------------
Bus Interface PCI, 2.1 compliant
Bus Width 32-bit
Data Transfer Mode PCI Bus Mastering
Ethernet Interface
------------------
10BaseT (10 Mbps) 2-pair EIA/TIA Category 3, 4 or 5
100BaseTX (100 Mbps) 2-pair EIA/TIA Category 5
Data Rate modes
---------------
10 Mbps
100 Mbps
Maximum Cabling Distances
-------------------------
10BaseT 100 meters
100BaseTX 100 meters
Interrupt levels
----------------
PCI: INTA, supports shared or assigned interrupts
Base I/O Memory Address
-----------------------
Assigned by BIOS
PCI configuration space supports DWORD, WORD and BYTE access
Power requirements
------------------
5 Watts @ +5 VDC
Dimensions
----------
Half Size form factor
Operating temperature
---------------------
0 - 55 degrees C (32 - 131 F)
Operating Humidity
------------------
85% at +55 C non-condensing
Reliability
-----------
Calculated MTBF > 300,000 hours
Standards Compliance
--------------------
IEEE 802.2, 802.3u, ISO, IEC 8802-3
Electrical Approvals
--------------------
FCC Class A, CUL, CE
Diagnostic LEDs
---------------
Activity Indicates that there is read/write activity
on the network
Link Indicates that a valid connection exists
Speed Indicates 100 Mbps operation
Diagnostic software
-------------------
On-board
On-network
Responder
* Third-party trademarks are the property of their
respective owners.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.